fix(nibe_local): file the heat pump as a heat pump, not a meter

CHANGELOG.md

@@ -7,6 +7,9 @@ Driver versions follow [Semantic Versioning](https://semver.org/spec/v2.0.0.html
 
 ## [Unreleased]
 
+### Fixed
+- **`nibe_local` was filed as a meter.** Its manifest declared `ders: [meter]`; it reads a NIBE S-series heat pump. The driver emits nothing but metrics — `hp_power_w`, `hp_used_power_w`, the temperatures and the lifetime energy counters, all through `host.emit_metric` and never through `host.emit("meter", …)` — which its header states is deliberate, so that a pump's electrical draw cannot double-count against the site's real grid meter. The catalog was advertising a DER the driver does not provide, and the published page (#51) badges and filters on exactly that field: the pump sat under **Meter** and was absent from **Heat pump**, where an owner looking for it would start. Now `ders: [heatpump]`, matching `heishamon` — the other metric-only heat pump, which has been filed that way since it landed. Manifest metadata only: the Lua source, its version and its `sha256` are untouched, so no host sees a new driver build
+
 ### Added
 - **A published driver catalog at [srcfl.github.io/device-drivers](https://srcfl.github.io/device-drivers/)** — all 80 drivers, searchable by manufacturer or model number and filterable by device type, protocol, tier and control. `tools/generate_site.py` builds it from the manifests and the Lua sources on every push to `main`, so no copy of this data is checked in and the page cannot fall behind what a host installs. It reports hardware evidence the way the repository does rather than the way a catalog usually does: 5 drivers state they have been confirmed against physical hardware and 28 state that they have not, and `tests/test_site.py` fails the build if a driver's `verification_status` is ever rendered as a stronger claim than the driver makes
 

devices.yaml

@@ -990,7 +990,7 @@ manufacturers:
           - protocol: http
             driver: "nibe_local"
             version: "1.1.0"
-            ders: [meter]
+            ders: [heatpump]
             control: true
         firmware_versions: ""
         notes: "Read-only NIBE S-series heat-pump telemetry over the on-prem Local REST API (HTTPS + Basic auth, self-signed cert pinned via tls_pin_sha256). Emits compressor/used power, lifetime energy meters, and the full ~980-point register map. Observe-only — no control."

index.yaml

@@ -332,7 +332,7 @@ drivers:
     version: "1.1.0"
     tier: core
     protocol: http
-    ders: [meter]
+    ders: [heatpump]
     control: true
     size_bytes: 18227
     sha256: "b89177004a2eff5a5b60e2f275f584f079acf02876c049b231ba3170bb35ac50"

manifests/nibe_local.yaml

@@ -3,7 +3,7 @@ version: "1.1.0"
 tier: core
 author: "Sourceful Labs AB"
 protocol: http
-ders: [meter]
+ders: [heatpump]
 control: true
 tested_devices:
   - manufacturer: "NIBE"