Bump the actions group with 4 updates

[dependabot]

Bumps the actions group with 4 updates: github/codeql-action/init, github/codeql-action/autobuild, github/codeql-action/analyze and github/codeql-action/upload-sarif.

Updates github/codeql-action/init from 4.37.3 to 4.37.4

Release notes

Sourced from github/codeql-action/init's releases.

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

Changelog

Sourced from github/codeql-action/init's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

4.36.1 - 02 Jun 2026

No user facing changes.

4.36.0 - 22 May 2026

• Breaking change: Bump the minimum required CodeQL bundle version to 2.19.4. #3894
• Add support for SHA-256 Git object IDs. #3893

... (truncated)

Commits

• f205ea1 Merge pull request #4053 from github/update-v4.37.4-9130ce0f7
• e40d079 Update changelog for v4.37.4
• 9130ce0 Merge pull request #4051 from github/update-bundle/codeql-bundle-v2.26.2
• c62d824 Add changelog note
• da0c190 Update default bundle to codeql-bundle-v2.26.2
• 18420e3 Merge pull request #4043 from github/mbg/ts/changelog
• 7e8d897 Merge pull request #4046 from github/mbg/repo-prop/code-quality
• 2d4c474 Log !analysisKindSupported case
• 98c05a1 Fix argument validation in rollback-changelog.ts
• 8289a49 Ignore repository property for unsupported analysis kinds
• Additional commits viewable in compare view

Updates github/codeql-action/autobuild from 4.37.3 to 4.37.4

Release notes

Sourced from github/codeql-action/autobuild's releases.

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

Changelog

Sourced from github/codeql-action/autobuild's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

4.36.1 - 02 Jun 2026

No user facing changes.

4.36.0 - 22 May 2026

• Breaking change: Bump the minimum required CodeQL bundle version to 2.19.4. #3894
• Add support for SHA-256 Git object IDs. #3893

... (truncated)

Commits

• f205ea1 Merge pull request #4053 from github/update-v4.37.4-9130ce0f7
• e40d079 Update changelog for v4.37.4
• 9130ce0 Merge pull request #4051 from github/update-bundle/codeql-bundle-v2.26.2
• c62d824 Add changelog note
• da0c190 Update default bundle to codeql-bundle-v2.26.2
• 18420e3 Merge pull request #4043 from github/mbg/ts/changelog
• 7e8d897 Merge pull request #4046 from github/mbg/repo-prop/code-quality
• 2d4c474 Log !analysisKindSupported case
• 98c05a1 Fix argument validation in rollback-changelog.ts
• 8289a49 Ignore repository property for unsupported analysis kinds
• Additional commits viewable in compare view

Updates github/codeql-action/analyze from 4.37.3 to 4.37.4

Release notes

Sourced from github/codeql-action/analyze's releases.

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

Changelog

Sourced from github/codeql-action/analyze's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

4.36.1 - 02 Jun 2026

No user facing changes.

4.36.0 - 22 May 2026

• Breaking change: Bump the minimum required CodeQL bundle version to 2.19.4. #3894
• Add support for SHA-256 Git object IDs. #3893

... (truncated)

Commits

• f205ea1 Merge pull request #4053 from github/update-v4.37.4-9130ce0f7
• e40d079 Update changelog for v4.37.4
• 9130ce0 Merge pull request #4051 from github/update-bundle/codeql-bundle-v2.26.2
• c62d824 Add changelog note
• da0c190 Update default bundle to codeql-bundle-v2.26.2
• 18420e3 Merge pull request #4043 from github/mbg/ts/changelog
• 7e8d897 Merge pull request #4046 from github/mbg/repo-prop/code-quality
• 2d4c474 Log !analysisKindSupported case
• 98c05a1 Fix argument validation in rollback-changelog.ts
• 8289a49 Ignore repository property for unsupported analysis kinds
• Additional commits viewable in compare view

Updates github/codeql-action/upload-sarif from 4.37.3 to 4.37.4

Release notes

Sourced from github/codeql-action/upload-sarif's releases.

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

Changelog

Sourced from github/codeql-action/upload-sarif's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

4.36.1 - 02 Jun 2026

No user facing changes.

4.36.0 - 22 May 2026

• Breaking change: Bump the minimum required CodeQL bundle version to 2.19.4. #3894
• Add support for SHA-256 Git object IDs. #3893

... (truncated)

Commits

• f205ea1 Merge pull request #4053 from github/update-v4.37.4-9130ce0f7
• e40d079 Update changelog for v4.37.4
• 9130ce0 Merge pull request #4051 from github/update-bundle/codeql-bundle-v2.26.2
• c62d824 Add changelog note
• da0c190 Update default bundle to codeql-bundle-v2.26.2
• 18420e3 Merge pull request #4043 from github/mbg/ts/changelog
• 7e8d897 Merge pull request #4046 from github/mbg/repo-prop/code-quality
• 2d4c474 Log !analysisKindSupported case
• 98c05a1 Fix argument validation in rollback-changelog.ts
• 8289a49 Ignore repository property for unsupported analysis kinds
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

[kubernetes-prow]

Hi @dependabot[bot]. Thanks for your PR.

I'm waiting for a kubernetes member to verify that this patch is reasonable to test. If it is, they should reply with /ok-to-test on its own line. Until that is done, I will not automatically test new commits in this PR, but the usual testing commands by org members will still work.

Regular contributors should join the org to skip this step.

Once the patch is verified, the new status will be reflected by the ok-to-test label.

I understand the commands that are listed here.

Details

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.

[kubernetes-prow]

[APPROVALNOTIFIER] This PR is APPROVED

This pull-request has been approved by: dependabot[bot], saschagrunert

The full list of commands accepted by this bot can be found here.

The pull request process is described here

Details

Needs approval from an approver in each of these files:

• OWNERS [saschagrunert]

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment