From 250ad024bfb99b8c7b564ebecf8861eca9ca8559 Mon Sep 17 00:00:00 2001
From: Klaus Ziegler <klausz@haus-gisela.de>
Date: Tue, 2 Dec 2025 15:09:30 +0100
Subject: [PATCH] new Korn Shell based installer.

---
 usr/src/cmd/distro_const/loader/Makefile      |    2 +-
 .../text_install/text_mode_sparc.xml          |   92 +-
 .../text_install/text_mode_sparc_minimal.xml  |   90 +-
 .../text_install/text_mode_x86.xml            |  278 ++-
 .../text_install/text_mode_x86_minimal.xml    |  272 ++-
 usr/src/cmd/distro_const/utils/Makefile       |    1 +
 .../utils/boot_archive_compress_usr           |  302 +++
 .../distro_const/utils/boot_archive_configure |    9 +
 .../utils/post_boot_archive_pkg_image_mod     |    7 +-
 .../cmd/slim-install/svc/live_fs_include.sh   |   93 +-
 usr/src/cmd/slim-install/svc/media-fs-root    |  120 +-
 .../slim-install/user/jack/README.multiboot   |  175 ++
 usr/src/cmd/text-install/svc/Makefile         |    5 +-
 usr/src/cmd/text-install/svc/text-install.ksh | 2132 +++++++++++++++++
 .../cmd/text-install/svc/text-mode-menu.ksh   |    9 +-
 .../cmd/text-install/svc/text-mode-menu.xml   |    2 +-
 .../install-distribution-constructor.p5m      |    1 +
 .../system-install-media-internal.p5m         |    1 +
 .../manifests/system-install-text-install.p5m |    3 +-
 19 files changed, 3204 insertions(+), 390 deletions(-)
 create mode 100755 usr/src/cmd/distro_const/utils/boot_archive_compress_usr
 mode change 100644 => 100755 usr/src/cmd/distro_const/utils/boot_archive_configure
 create mode 100644 usr/src/cmd/slim-install/user/jack/README.multiboot
 create mode 100755 usr/src/cmd/text-install/svc/text-install.ksh
 mode change 100644 => 100755 usr/src/cmd/text-install/svc/text-mode-menu.ksh

diff --git a/usr/src/cmd/distro_const/loader/Makefile b/usr/src/cmd/distro_const/loader/Makefile
index e3b20890..d938e030 100644
--- a/usr/src/cmd/distro_const/loader/Makefile
+++ b/usr/src/cmd/distro_const/loader/Makefile
@@ -38,7 +38,7 @@ DC_LOADER_FILES=	loader.rc.local menu.rc.local
 # Note: PYCMODULES are not delivered.
 # They are only compiled for error checking purposes.
 ROOTDC_LOADER=	$(ROOTDC)/loader
-ROOTDC_LOADER_FILES=	$(DC_LOADER_FILES:%=$(ROOTDC)/loader/%)
+ROOTDC_LOADER_FILES=	$(DC_LOADER_FILES:%=$(ROOTDC_LOADER)/%)
 
 all:
 clean:
diff --git a/usr/src/cmd/distro_const/text_install/text_mode_sparc.xml b/usr/src/cmd/distro_const/text_install/text_mode_sparc.xml
index b2d97818..3279086d 100644
--- a/usr/src/cmd/distro_const/text_install/text_mode_sparc.xml
+++ b/usr/src/cmd/distro_const/text_install/text_mode_sparc.xml
@@ -178,7 +178,7 @@
 		-->
 		<pkg_repo_default_authority>
 			<main
-				url="https://pkg.openindiana.aurora-opencloud.org/oi-sparc"
+				url="https://pkg.openindiana.aurora-opencloud.org/oi-sparc/"
 				authname="openindiana.org"/>
 			<!--
 			     If you want to use one or more  mirrors that are
@@ -233,9 +233,8 @@
 		    Uncomment before using.
 		<post_install_repo_addl_authority>
 			<main
-				url=""
-				authname=""/>
-			<mirror url="" />
+				url="http://your.build.host:10000/"
+				authname="userland"/>
 		</post_install_repo_addl_authority>
 		-->
 		<!--
@@ -253,8 +252,14 @@
 			-->
 			<pkg name="pkg:/entire"/>
 			<pkg name="pkg:/server_install"/>
+			<pkg name="pkg:/system/kernel/cpu/sun4v"/>
 			<pkg name="pkg:/system/install/text-install"/>
 			<pkg name="pkg:/system/install/media/internal"/>
+			<pkg name="pkg:/service/key-management/sun-fire-15000"/>
+			<pkg name="pkg:/system/domain-configuration/sparc-enterprise"/>
+			<pkg name="pkg:/system/kernel/dynamic-reconfiguration/sun-fire-880"/>
+			<pkg name="pkg:/system/kernel/dynamic-reconfiguration/sun-fire-15000"/>
+			<pkg name="pkg:/system/domain-service-processor-protocol/sparc-enterprise"/>
 		</packages>
 <!--
      Items below this line are rarely configured
@@ -293,8 +298,8 @@
 			<base_include type="file">usr/bin/bash</base_include>
 			<base_include type="file">usr/bin/cat</base_include>
 			<base_include type="file">usr/bin/cd</base_include>
-			<base_include type="file">usr/bin/coreadm</base_include>
 			<base_include type="file">usr/bin/cp</base_include>
+			<base_include type="file">usr/bin/coreadm</base_include>
 			<base_include type="file">usr/bin/cut</base_include>
 			<base_include type="file">usr/bin/echo</base_include>
 			<base_include type="file">usr/bin/expr</base_include>
@@ -325,33 +330,6 @@
 			<base_include type="file">usr/bin/vi</base_include>
 			<base_include type="file">usr/bin/which</base_include>
 			<base_include type="file">usr/has/bin/vi</base_include>
-			<base_include type="file">usr/sbin/chroot</base_include>
-			<base_include type="file">usr/sbin/devfsadm</base_include>
-			<base_include type="file">usr/sbin/df</base_include>
-			<base_include type="file">usr/sbin/format</base_include>
-			<base_include type="file">usr/sbin/hostconfig</base_include>
-			<base_include type="file">usr/sbin/lofiadm</base_include>
-			<base_include type="file">usr/sbin/modload</base_include>
-			<base_include type="file">usr/sbin/mount</base_include>
-			<base_include type="file">usr/sbin/nwamadm</base_include>
-			<base_include type="file">usr/sbin/nwamcfg</base_include>
-			<base_include type="file">usr/sbin/ping</base_include>
-			<base_include type="file">usr/sbin/pmadm</base_include>
-			<base_include type="file">usr/sbin/prtconf</base_include>
-			<base_include type="file">usr/sbin/prtvtoc</base_include>
-			<base_include type="file">usr/sbin/svccfg</base_include>
-			<base_include type="file">usr/sbin/svcadm</base_include>
-			<base_include type="file">usr/sbin/syslogd</base_include>
-			<base_include type="file">usr/share/lib/xml/dtd/service_bundle.dtd.1</base_include>
-			<base_include type="file">usr/lib/fs/hsfs/fstyp</base_include>
-			<base_include type="file">usr/lib/fs/hsfs/fstyp.so.1</base_include>
-			<base_include type="file">usr/lib/fs/hsfs/mount</base_include>
-			<base_include type="file">usr/lib/fs/tmpfs/mount</base_include>
-			<base_include type="file">usr/lib/fs/ufs/fstyp</base_include>
-			<base_include type="file">usr/lib/fs/ufs/fstyp.so.1</base_include>
-			<base_include type="file">usr/lib/fs/ufs/mount</base_include>
-			<base_include type="file">usr/lib/libfstyp.so.1</base_include>
-			<base_include type="file">usr/lib/platexec</base_include>
 			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_audio_link.so</base_include>
 			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_cfg_link.so</base_include>
 			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_disk_link.so</base_include>
@@ -366,32 +344,58 @@
 			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_usb_link.so</base_include>
 			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_zfs_link.so</base_include>
 			<base_include type="file">usr/lib/devfsadm/devfsadmd</base_include>
-			<base_include type="file">usr/lib/libm.so</base_include>
-			<base_include type="file">usr/lib/libm.so.2</base_include>
-			<base_include type="file">usr/lib/64/libm.so</base_include>
-			<base_include type="file">usr/lib/64/libm.so.2</base_include>
-			<base_include type="file">usr/lib/libfstyp.so</base_include>
-			<base_include type="file">usr/lib/libz.so</base_include>
-			<base_include type="file">usr/lib/libz.so.1</base_include>
+			<base_include type="file">usr/lib/fs/hsfs/fstyp</base_include>
+			<base_include type="file">usr/lib/fs/hsfs/fstyp.so.1</base_include>
+			<base_include type="file">usr/lib/fs/hsfs/mount</base_include>
+			<base_include type="file">usr/lib/fs/tmpfs/mount</base_include>
+			<base_include type="file">usr/lib/fs/ufs/fstyp</base_include>
+			<base_include type="file">usr/lib/fs/ufs/fstyp.so.1</base_include>
+			<base_include type="file">usr/lib/fs/ufs/mount</base_include>
 			<base_include type="file">usr/lib/isaexec</base_include>
 			<base_include type="file">usr/lib/libast.so.1</base_include>
 			<base_include type="file">usr/lib/64/libast.so.1</base_include>
 			<base_include type="file">usr/lib/libcmd.so.1</base_include>
 			<base_include type="file">usr/lib/64/libcmd.so.1</base_include>
+			<base_include type="file">usr/lib/libcrypt.so.1</base_include>
 			<base_include type="file">usr/lib/libdll.so.1</base_include>
 			<base_include type="file">usr/lib/64/libdll.so.1</base_include>
+			<base_include type="file">usr/lib/libfstyp.so</base_include>
+			<base_include type="file">usr/lib/libfstyp.so.1</base_include>
+			<base_include type="file">usr/lib/libm.so</base_include>
+			<base_include type="file">usr/lib/libm.so.2</base_include>
+			<base_include type="file">usr/lib/64/libm.so</base_include>
+			<base_include type="file">usr/lib/64/libm.so.2</base_include>
+			<base_include type="file">usr/lib/libmapmalloc.so.1</base_include>
 			<base_include type="file">usr/lib/libshell.so.1</base_include>
 			<base_include type="file">usr/lib/64/libshell.so.1</base_include>
-			<base_include type="file">usr/lib/libcrypt.so.1</base_include>
-			<base_include type="file">usr/lib/libmapmalloc.so.1</base_include>
+			<base_include type="file">usr/lib/libz.so</base_include>
+			<base_include type="file">usr/lib/libz.so.1</base_include>
+			<base_include type="file">usr/lib/platexec</base_include>
+			<base_include type="file">usr/sbin/chroot</base_include>
+			<base_include type="file">usr/sbin/devfsadm</base_include>
+			<base_include type="file">usr/sbin/df</base_include>
+			<base_include type="file">usr/sbin/format</base_include>
+			<base_include type="file">usr/sbin/hostconfig</base_include>
+			<base_include type="file">usr/sbin/lofiadm</base_include>
+			<base_include type="file">usr/sbin/modload</base_include>
+			<base_include type="file">usr/sbin/mount</base_include>
+			<base_include type="file">usr/sbin/nwamadm</base_include>
+			<base_include type="file">usr/sbin/nwamcfg</base_include>
+			<base_include type="file">usr/sbin/ping</base_include>
+			<base_include type="file">usr/sbin/pmadm</base_include>
+			<base_include type="file">usr/sbin/prtconf</base_include>
+			<base_include type="file">usr/sbin/prtvtoc</base_include>
+			<base_include type="file">usr/sbin/svcadm</base_include>
+			<base_include type="file">usr/sbin/svccfg</base_include>
+			<base_include type="file">usr/sbin/syslogd</base_include>
 			<base_include type="file">usr/share/lib/xml/dtd/service_bundle.dtd.1</base_include>
-			<base_include type="file">var/sadm/install/admin/default</base_include>
-			<base_include type="file">var/sadm/install/contents</base_include>
 			<base_include type="file">var/adm/utmpx</base_include>
 			<base_include type="file">var/adm/wtmpx</base_include>
 			<base_include type="file">var/adm/aculog</base_include>
 			<base_include type="file">var/log/authlog</base_include>
 			<base_include type="file">var/log/syslog</base_include>
+			<base_include type="file">var/sadm/install/admin/default</base_include>
+			<base_include type="file">var/sadm/install/contents</base_include>
 			<base_include type="file">var/saf/zsmon/log</base_include>
 			<base_include type="file">var/spool/cron/crontabs/adm</base_include>
 			<base_include type="file">var/spool/cron/crontabs/root</base_include>
@@ -510,8 +514,6 @@
 			<base_include type="file">lib/libc.so.1</base_include>
 			<base_include type="file">lib/64/libc.so.1</base_include>
 			<base_include type="file">lib/libpthread.so.1</base_include>
-			<base_include type="file">lib/libm.so.2</base_include>
-			<base_include type="file">lib/64/libm.so.2</base_include>
 			<base_include type="file">lib/libnsl.so.1</base_include>
 			<base_include type="file">lib/64/libnsl.so.1</base_include>
 			<base_include type="file">lib/libgen.so.1</base_include>
diff --git a/usr/src/cmd/distro_const/text_install/text_mode_sparc_minimal.xml b/usr/src/cmd/distro_const/text_install/text_mode_sparc_minimal.xml
index 806f14ca..f2ad92eb 100644
--- a/usr/src/cmd/distro_const/text_install/text_mode_sparc_minimal.xml
+++ b/usr/src/cmd/distro_const/text_install/text_mode_sparc_minimal.xml
@@ -21,7 +21,7 @@
     Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved.
 
     XML specification for building the limited language OpenIndiana
-    Minimal Text Mode Installer iso and usb image
+    Minimal new Text Mode iso/usb Installer for SPARC
 -->
 
 <distribution name="OpenIndiana_Minimal_SPARC">
@@ -99,6 +99,11 @@
 						".textinstall"
 					</argslist>
 				</script>
+				<script name="/usr/share/distro_const/boot_archive_compress_usr">
+					<checkpoint
+						name="ba-usrtar"
+						message="Boot archive compress /usr"/>
+				</script>
 				<script name="/usr/share/distro_const/plat_setup.py">
 					<checkpoint
 						name="plat-setup"
@@ -252,8 +257,14 @@
 			-->
 			<pkg name="pkg:/entire"/>
 			<pkg name="pkg:/minimal_install"/>
+			<pkg name="pkg:/system/kernel/cpu/sun4v"/>
 			<pkg name="pkg:/system/install/text-install"/>
 			<pkg name="pkg:/system/install/media/internal"/>
+			<pkg name="pkg:/service/key-management/sun-fire-15000"/>
+			<pkg name="pkg:/system/domain-configuration/sparc-enterprise"/>
+			<pkg name="pkg:/system/kernel/dynamic-reconfiguration/sun-fire-880"/>
+			<pkg name="pkg:/system/kernel/dynamic-reconfiguration/sun-fire-15000"/>
+			<pkg name="pkg:/system/domain-service-processor-protocol/sparc-enterprise"/>
 		</packages>
 <!--
      Items below this line are rarely configured
@@ -292,8 +303,8 @@
 			<base_include type="file">usr/bin/bash</base_include>
 			<base_include type="file">usr/bin/cat</base_include>
 			<base_include type="file">usr/bin/cd</base_include>
-			<base_include type="file">usr/bin/coreadm</base_include>
 			<base_include type="file">usr/bin/cp</base_include>
+			<base_include type="file">usr/bin/coreadm</base_include>
 			<base_include type="file">usr/bin/cut</base_include>
 			<base_include type="file">usr/bin/echo</base_include>
 			<base_include type="file">usr/bin/expr</base_include>
@@ -324,33 +335,6 @@
 			<base_include type="file">usr/bin/vi</base_include>
 			<base_include type="file">usr/bin/which</base_include>
 			<base_include type="file">usr/has/bin/vi</base_include>
-			<base_include type="file">usr/sbin/chroot</base_include>
-			<base_include type="file">usr/sbin/devfsadm</base_include>
-			<base_include type="file">usr/sbin/df</base_include>
-			<base_include type="file">usr/sbin/format</base_include>
-			<base_include type="file">usr/sbin/hostconfig</base_include>
-			<base_include type="file">usr/sbin/lofiadm</base_include>
-			<base_include type="file">usr/sbin/modload</base_include>
-			<base_include type="file">usr/sbin/mount</base_include>
-			<base_include type="file">usr/sbin/nwamadm</base_include>
-			<base_include type="file">usr/sbin/nwamcfg</base_include>
-			<base_include type="file">usr/sbin/ping</base_include>
-			<base_include type="file">usr/sbin/pmadm</base_include>
-			<base_include type="file">usr/sbin/prtconf</base_include>
-			<base_include type="file">usr/sbin/prtvtoc</base_include>
-			<base_include type="file">usr/sbin/svccfg</base_include>
-			<base_include type="file">usr/sbin/svcadm</base_include>
-			<base_include type="file">usr/sbin/syslogd</base_include>
-			<base_include type="file">usr/share/lib/xml/dtd/service_bundle.dtd.1</base_include>
-			<base_include type="file">usr/lib/fs/hsfs/fstyp</base_include>
-			<base_include type="file">usr/lib/fs/hsfs/fstyp.so.1</base_include>
-			<base_include type="file">usr/lib/fs/hsfs/mount</base_include>
-			<base_include type="file">usr/lib/fs/tmpfs/mount</base_include>
-			<base_include type="file">usr/lib/fs/ufs/fstyp</base_include>
-			<base_include type="file">usr/lib/fs/ufs/fstyp.so.1</base_include>
-			<base_include type="file">usr/lib/fs/ufs/mount</base_include>
-			<base_include type="file">usr/lib/libfstyp.so.1</base_include>
-			<base_include type="file">usr/lib/platexec</base_include>
 			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_audio_link.so</base_include>
 			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_cfg_link.so</base_include>
 			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_disk_link.so</base_include>
@@ -365,32 +349,58 @@
 			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_usb_link.so</base_include>
 			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_zfs_link.so</base_include>
 			<base_include type="file">usr/lib/devfsadm/devfsadmd</base_include>
-			<base_include type="file">usr/lib/libm.so</base_include>
-			<base_include type="file">usr/lib/libm.so.2</base_include>
-			<base_include type="file">usr/lib/64/libm.so</base_include>
-			<base_include type="file">usr/lib/64/libm.so.2</base_include>
-			<base_include type="file">usr/lib/libfstyp.so</base_include>
-			<base_include type="file">usr/lib/libz.so</base_include>
-			<base_include type="file">usr/lib/libz.so.1</base_include>
+			<base_include type="file">usr/lib/fs/hsfs/fstyp</base_include>
+			<base_include type="file">usr/lib/fs/hsfs/fstyp.so.1</base_include>
+			<base_include type="file">usr/lib/fs/hsfs/mount</base_include>
+			<base_include type="file">usr/lib/fs/tmpfs/mount</base_include>
+			<base_include type="file">usr/lib/fs/ufs/fstyp</base_include>
+			<base_include type="file">usr/lib/fs/ufs/fstyp.so.1</base_include>
+			<base_include type="file">usr/lib/fs/ufs/mount</base_include>
 			<base_include type="file">usr/lib/isaexec</base_include>
 			<base_include type="file">usr/lib/libast.so.1</base_include>
 			<base_include type="file">usr/lib/64/libast.so.1</base_include>
 			<base_include type="file">usr/lib/libcmd.so.1</base_include>
 			<base_include type="file">usr/lib/64/libcmd.so.1</base_include>
+			<base_include type="file">usr/lib/libcrypt.so.1</base_include>
 			<base_include type="file">usr/lib/libdll.so.1</base_include>
 			<base_include type="file">usr/lib/64/libdll.so.1</base_include>
+			<base_include type="file">usr/lib/libfstyp.so</base_include>
+			<base_include type="file">usr/lib/libfstyp.so.1</base_include>
+			<base_include type="file">usr/lib/libm.so</base_include>
+			<base_include type="file">usr/lib/libm.so.2</base_include>
+			<base_include type="file">usr/lib/64/libm.so</base_include>
+			<base_include type="file">usr/lib/64/libm.so.2</base_include>
+			<base_include type="file">usr/lib/libmapmalloc.so.1</base_include>
 			<base_include type="file">usr/lib/libshell.so.1</base_include>
 			<base_include type="file">usr/lib/64/libshell.so.1</base_include>
-			<base_include type="file">usr/lib/libcrypt.so.1</base_include>
-			<base_include type="file">usr/lib/libmapmalloc.so.1</base_include>
+			<base_include type="file">usr/lib/libz.so</base_include>
+			<base_include type="file">usr/lib/libz.so.1</base_include>
+			<base_include type="file">usr/lib/platexec</base_include>
+			<base_include type="file">usr/sbin/chroot</base_include>
+			<base_include type="file">usr/sbin/devfsadm</base_include>
+			<base_include type="file">usr/sbin/df</base_include>
+			<base_include type="file">usr/sbin/format</base_include>
+			<base_include type="file">usr/sbin/hostconfig</base_include>
+			<base_include type="file">usr/sbin/lofiadm</base_include>
+			<base_include type="file">usr/sbin/modload</base_include>
+			<base_include type="file">usr/sbin/mount</base_include>
+			<base_include type="file">usr/sbin/nwamadm</base_include>
+			<base_include type="file">usr/sbin/nwamcfg</base_include>
+			<base_include type="file">usr/sbin/ping</base_include>
+			<base_include type="file">usr/sbin/pmadm</base_include>
+			<base_include type="file">usr/sbin/prtconf</base_include>
+			<base_include type="file">usr/sbin/prtvtoc</base_include>
+			<base_include type="file">usr/sbin/svcadm</base_include>
+			<base_include type="file">usr/sbin/svccfg</base_include>
+			<base_include type="file">usr/sbin/syslogd</base_include>
 			<base_include type="file">usr/share/lib/xml/dtd/service_bundle.dtd.1</base_include>
-			<base_include type="file">var/sadm/install/admin/default</base_include>
-			<base_include type="file">var/sadm/install/contents</base_include>
 			<base_include type="file">var/adm/utmpx</base_include>
 			<base_include type="file">var/adm/wtmpx</base_include>
 			<base_include type="file">var/adm/aculog</base_include>
 			<base_include type="file">var/log/authlog</base_include>
 			<base_include type="file">var/log/syslog</base_include>
+			<base_include type="file">var/sadm/install/admin/default</base_include>
+			<base_include type="file">var/sadm/install/contents</base_include>
 			<base_include type="file">var/saf/zsmon/log</base_include>
 			<base_include type="file">var/spool/cron/crontabs/adm</base_include>
 			<base_include type="file">var/spool/cron/crontabs/root</base_include>
diff --git a/usr/src/cmd/distro_const/text_install/text_mode_x86.xml b/usr/src/cmd/distro_const/text_install/text_mode_x86.xml
index d84a2fc7..0ef55ef4 100644
--- a/usr/src/cmd/distro_const/text_install/text_mode_x86.xml
+++ b/usr/src/cmd/distro_const/text_install/text_mode_x86.xml
@@ -303,119 +303,107 @@
 		     must exist in the pkg_image area.
 		-->
 		<boot_archive_contents>
-			<base_include type="file">usr/bin/nawk</base_include>
-			<base_include type="file">usr/bin/mkdir</base_include>
-			<base_include type="file">usr/bin/cp</base_include>
-			<base_include type="file">usr/bin/sed</base_include>
-			<base_include type="file">usr/bin/sort</base_include>
-			<base_include type="file">usr/bin/amd64/sort</base_include>
-			<base_include type="file">usr/bin/i86/sort</base_include>
-			<base_include type="file">usr/bin/pkill</base_include>
-			<base_include type="file">usr/sbin/svcadm</base_include>
-			<base_include type="file">usr/sbin/svccfg</base_include>
-			<base_include type="file">usr/sbin/prtconf</base_include>
-			<base_include type="file">usr/sbin/amd64/prtconf</base_include>
-			<base_include type="file">usr/sbin/i86/prtconf</base_include>
-			<base_include type="file">usr/sbin/nwamcfg</base_include>
-			<base_include type="file">usr/sbin/nwamadm</base_include>
-
-			<!-- libraries needed by /usr/bin/bash -->
-			<base_include type="file">usr/lib/64/libncurses.so.5</base_include>
-			<base_include type="file">usr/lib/64/libncurses.so.5.9</base_include>
-
-			<!-- libraries needed by /usr/sbin/prtconf -->
-			<base_include type="file">usr/lib/libsmbios.so.1</base_include>
-
-			<!-- libraries needed by /usr/sbin/svccfg -->
-			<base_include type="file">lib/libscf.so.1</base_include>
-			<base_include type="file">lib/libuutil.so.1</base_include>
-			<base_include type="file">lib/libumem.so.1</base_include>
-			<base_include type="file">lib/libmd.so.1</base_include>
-			<base_include type="file">lib/libnvpair.so.1</base_include>
-			<base_include type="file">lib/libc.so.1</base_include>
-			<base_include type="file">lib/libpthread.so.1</base_include>
-			<base_include type="file">lib/libm.so.2</base_include>
-			<base_include type="file">lib/libsocket.so.1</base_include>
-			<base_include type="file">lib/libnsl.so.1</base_include>
-			<base_include type="file">lib/libgen.so.1</base_include>
-			<base_include type="file">lib/libcurses.so.1</base_include>
-			<base_include type="file">lib/librt.so.1</base_include>
-			<base_include type="file">lib/libmp.so.2</base_include>
-			<base_include type="file">lib/libdevinfo.so.1</base_include>
-			<base_include type="file">lib/libsec.so.1</base_include>
-			<base_include type="file">lib/libavl.so.1</base_include>
-			<base_include type="file">usr/lib/libxml2.so.2</base_include>
-			<base_include type="file">usr/lib/libl.so.1</base_include>
-			<base_include type="file">usr/lib/libtecla.so.1</base_include>
-			<base_include type="file">usr/lib/libz.so.1</base_include>
-			<base_include type="file">usr/lib/liblzma.so.5</base_include>
-			<base_include type="file">usr/lib/libicuuc.so.68</base_include>
-			<base_include type="file">usr/lib/libsmbios.so.1</base_include>
-			<base_include type="file">usr/lib/libicudata.so.68</base_include>
-			<base_include type="file">usr/lib/libidmap.so.1</base_include>
-
-			<base_include type="file">usr/sbin/pmadm</base_include>
-			<base_include type="file">usr/sbin/lofiadm</base_include>
-			<base_include type="file">usr/sbin/devfsadm</base_include>
-			<base_include type="file">usr/sbin/modload</base_include>
-			<base_include type="file">usr/sbin/i86/modload</base_include>
-			<base_include type="file">usr/sbin/mount</base_include>
-			<base_include type="file">usr/sbin/hostconfig</base_include>
-			<base_include type="file">usr/sbin/chroot</base_include>
-			<base_include type="file">usr/sbin/syslogd</base_include>
-			<base_include type="file">usr/bin/coreadm</base_include>
 			<base_include type="file">usr/bin/bash</base_include>
-			<base_include type="file">usr/bin/ksh</base_include>
 			<base_include type="file">usr/bin/cat</base_include>
+			<base_include type="file">usr/bin/cd</base_include>
+			<base_include type="file">usr/bin/cp</base_include>
+			<base_include type="file">usr/bin/coreadm</base_include>
+			<base_include type="file">usr/bin/cut</base_include>
 			<base_include type="file">usr/bin/echo</base_include>
+			<base_include type="file">usr/bin/expr</base_include>
 			<base_include type="file">usr/bin/false</base_include>
+			<base_include type="file">usr/bin/file</base_include>
 			<base_include type="file">usr/bin/grep</base_include>
+			<base_include type="file">usr/bin/i86/ksh93</base_include>
+			<base_include type="file">usr/bin/ldd</base_include>
+			<base_include type="file">usr/bin/less</base_include>
 			<base_include type="file">usr/bin/ls</base_include>
+			<base_include type="file">usr/bin/mkdir</base_include>
+			<base_include type="file">usr/bin/more</base_include>
+			<base_include type="file">usr/bin/nawk</base_include>
+			<base_include type="file">usr/bin/pkill</base_include>
+			<base_include type="file">usr/bin/ps</base_include>
 			<base_include type="file">usr/bin/rm</base_include>
+			<base_include type="file">usr/bin/sed</base_include>
+			<base_include type="file">usr/bin/sleep</base_include>
+			<base_include type="file">usr/bin/sort</base_include>
 			<base_include type="file">usr/bin/svcprop</base_include>
-			<base_include type="file">usr/bin/true</base_include>
-			<base_include type="file">usr/bin/cd</base_include>
+			<base_include type="file">usr/bin/svcs</base_include>
+			<base_include type="file">usr/bin/tail</base_include>
 			<base_include type="file">usr/bin/test</base_include>
-			<base_include type="file">usr/bin/sleep</base_include>
-			<base_include type="file">usr/bin/expr</base_include>
+			<base_include type="file">usr/bin/true</base_include>
 			<base_include type="file">usr/bin/vi</base_include>
+			<base_include type="file">usr/bin/which</base_include>
 			<base_include type="file">usr/has/bin/vi</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_audio_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_cfg_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_disk_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_fssnap_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_ieee1394_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_lofi_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_misc_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_port_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_ramdisk_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_sgen_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_tape_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_usb_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_zfs_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/devfsadmd</base_include>
 			<base_include type="file">usr/lib/fs/hsfs/fstyp</base_include>
 			<base_include type="file">usr/lib/fs/hsfs/fstyp.so.1</base_include>
 			<base_include type="file">usr/lib/fs/hsfs/mount</base_include>
+			<base_include type="file">usr/lib/fs/tmpfs/mount</base_include>
 			<base_include type="file">usr/lib/fs/ufs/fstyp</base_include>
 			<base_include type="file">usr/lib/fs/ufs/fstyp.so.1</base_include>
 			<base_include type="file">usr/lib/fs/ufs/mount</base_include>
-			<base_include type="file">usr/lib/libfstyp.so.1</base_include>
-			<base_include type="file">usr/lib/platexec</base_include>
-			<base_include type="file">usr/lib/devfsadm/devfsadmd</base_include>
-			<base_include type="file">usr/lib/libm.so.2</base_include>
-			<base_include type="file">usr/lib/libm.so</base_include>
-			<base_include type="file">usr/lib/libfstyp.so</base_include>
-			<base_include type="file">usr/lib/libz.so</base_include>
-			<base_include type="file">usr/lib/libz.so.1</base_include>
-			<base_include type="file">usr/bin/i86/ksh93</base_include>
 			<base_include type="file">usr/lib/isaexec</base_include>
 			<base_include type="file">usr/lib/libast.so.1</base_include>
+			<base_include type="file">usr/lib/64/libast.so.1</base_include>
 			<base_include type="file">usr/lib/libcmd.so.1</base_include>
+			<base_include type="file">usr/lib/64/libcmd.so.1</base_include>
+			<base_include type="file">usr/lib/libcrypt.so.1</base_include>
 			<base_include type="file">usr/lib/libdll.so.1</base_include>
+			<base_include type="file">usr/lib/64/libdll.so.1</base_include>
+			<base_include type="file">usr/lib/libfstyp.so</base_include>
+			<base_include type="file">usr/lib/libfstyp.so.1</base_include>
+			<base_include type="file">usr/lib/libm.so</base_include>
+			<base_include type="file">usr/lib/libm.so.2</base_include>
+			<base_include type="file">usr/lib/64/libm.so</base_include>
+			<base_include type="file">usr/lib/64/libm.so.2</base_include>
+			<base_include type="file">usr/lib/libmapmalloc.so.1</base_include>
 			<base_include type="file">usr/lib/libshell.so.1</base_include>
+			<base_include type="file">usr/lib/64/libshell.so.1</base_include>
+			<base_include type="file">usr/lib/libz.so</base_include>
+			<base_include type="file">usr/lib/libz.so.1</base_include>
+			<base_include type="file">usr/lib/platexec</base_include>
+			<base_include type="file">usr/sbin/chroot</base_include>
+			<base_include type="file">usr/sbin/devfsadm</base_include>
+			<base_include type="file">usr/sbin/df</base_include>
+			<base_include type="file">usr/sbin/format</base_include>
+			<base_include type="file">usr/sbin/hostconfig</base_include>
+			<base_include type="file">usr/sbin/lofiadm</base_include>
+			<base_include type="file">usr/sbin/modload</base_include>
+			<base_include type="file">usr/sbin/mount</base_include>
+			<base_include type="file">usr/sbin/nwamadm</base_include>
+			<base_include type="file">usr/sbin/nwamcfg</base_include>
+			<base_include type="file">usr/sbin/ping</base_include>
+			<base_include type="file">usr/sbin/pmadm</base_include>
+			<base_include type="file">usr/sbin/prtconf</base_include>
+			<base_include type="file">usr/sbin/prtvtoc</base_include>
+			<base_include type="file">usr/sbin/svcadm</base_include>
+			<base_include type="file">usr/sbin/svccfg</base_include>
+			<base_include type="file">usr/sbin/syslogd</base_include>
 			<base_include type="file">usr/share/lib/xml/dtd/service_bundle.dtd.1</base_include>
-			<base_include type="file">var/sadm/install/admin/default</base_include>
-			<base_include type="file">var/sadm/system/admin/default_java</base_include>
-			<base_include type="file">var/sadm/install/contents</base_include>
 			<base_include type="file">var/adm/utmpx</base_include>
 			<base_include type="file">var/adm/wtmpx</base_include>
 			<base_include type="file">var/adm/aculog</base_include>
-			<base_include type="file">var/lib/postrun/postrun-runq</base_include>
-			<base_include type="file">var/lib/postrun/postrun</base_include>
-			<base_include type="file">var/log/postrun.log</base_include>
 			<base_include type="file">var/log/authlog</base_include>
 			<base_include type="file">var/log/syslog</base_include>
+			<base_include type="file">var/sadm/install/admin/default</base_include>
+			<base_include type="file">var/sadm/install/contents</base_include>
 			<base_include type="file">var/saf/zsmon/log</base_include>
 			<base_include type="file">var/spool/cron/crontabs/adm</base_include>
 			<base_include type="file">var/spool/cron/crontabs/root</base_include>
-			<base_include type="file">var/nis/NIS+LDAPmapping.template</base_include>
 			<base_include type="file">var/yp/aliases</base_include>
 			<base_include type="file">var/yp/nicknames</base_include>
 			<base_include type="dir">kernel</base_include>
@@ -433,11 +421,131 @@
 			<base_include type="dir">var/svc/profile</base_include>
 			<base_include type="dir">var/sadm</base_include>
 			<base_include type="dir">etc</base_include>
-			<base_exclude type="dir">etc/gconf</base_exclude>
-			<base_exclude type="dir">etc/brltty</base_exclude>
-			<base_exclude type="dir">etc/gtk-2.0</base_exclude>
 			<base_exclude type="dir">etc/notices</base_exclude>
 			<base_exclude type="dir">var/sadm/pkg</base_exclude>
+
+			<!-- libraries for /lib/svc/method/svc-fcoei BugID: #16318-->
+			<base_include type="file">lib/libavl.so.1</base_include>
+			<base_include type="file">lib/libdevinfo.so.1</base_include>
+			<base_include type="file">lib/libdladm.so.1</base_include>
+			<base_include type="file">lib/libinetutil.so.1</base_include>
+			<base_include type="file">lib/libkstat.so.1</base_include>
+			<base_include type="file">lib/libofmt.so.1</base_include>
+			<base_include type="file">lib/librcm.so.1</base_include>
+			<base_include type="file">lib/libsec.so.1</base_include>
+			<base_include type="file">lib/libvarpd.so.1</base_include>
+			<base_include type="file">usr/lib/libexacct.so.1</base_include>
+			<base_include type="file">usr/lib/libfcoe.so.1</base_include>
+			<base_include type="file">usr/lib/libidmap.so.1</base_include>
+			<base_include type="file">usr/lib/libidspace.so.1</base_include>
+			<base_include type="file">usr/lib/libpool.so.1</base_include>
+			<base_include type="file">usr/lib/librename.so.1</base_include>
+
+			<!-- libraries for /sbin/ifconfig|/lib/svc/method/net-netmask BugID: #16318-->
+			<base_include type="file">lib/libcmdutils.so.1</base_include>
+			<base_include type="file">lib/libcontract.so.1</base_include>
+			<base_include type="file">lib/libcustr.so.1</base_include>
+			<base_include type="file">lib/libdhcpagent.so.1</base_include>
+			<base_include type="file">lib/libdhcputil.so.1</base_include>
+			<base_include type="file">lib/libdlpi.so.1</base_include>
+			<base_include type="file">lib/libipadm.so.1</base_include>
+			<base_include type="file">lib/libipmp.so.1</base_include>
+			<base_include type="file">lib/libsecdb.so.1</base_include>
+			<base_include type="file">lib/libuuid.so.1</base_include>
+			<base_include type="file">lib/libxnet.so.1</base_include>
+
+			<!-- libraries for /sbin/dladm BugID: #16318-->
+			<base_include type="file">lib/libbsm.so.1</base_include>
+			<base_include type="file">usr/lib/librstp.so.1</base_include>
+			<base_include type="file">usr/lib/libtsol.so.2</base_include>
+
+			<!-- libraries for /usr/bin/bash -->
+			<base_include type="file">usr/lib/64/libncurses.so.5</base_include>
+			<base_include type="file">usr/lib/64/libncurses.so.5.9</base_include>
+
+			<!-- libraries for /usr/bin/cut BugID: #16318-->
+			<base_include type="file">usr/lib/64/libsum.so.1</base_include>
+
+			<!-- libraries for /usr/bin/ps-->
+			<base_include type="file">/lib/64/libavl.so.1</base_include>
+			<base_include type="file">/lib/64/libctf.so.1</base_include>
+			<base_include type="file">/lib/64/libdevinfo.so.1</base_include>
+			<base_include type="file">/lib/64/libdwarf.so.1</base_include>
+			<base_include type="file">/lib/64/libelf.so.1</base_include>
+			<base_include type="file">/lib/64/libgen.so.1</base_include>
+			<base_include type="file">/lib/64/libnvpair.so.1</base_include>
+			<base_include type="file">/lib/64/libproc.so.1</base_include>
+			<base_include type="file">/lib/64/libpthread.so.1</base_include>
+			<base_include type="file">/lib/64/librtld.so.1</base_include>
+			<base_include type="file">/lib/64/libscf.so.1</base_include>
+			<base_include type="file">/lib/64/libsec.so.1</base_include>
+			<base_include type="file">/lib/64/libsecdb.so.1</base_include>
+			<base_include type="file">/lib/64/libsmbios.so.1</base_include>
+			<base_include type="file">/lib/64/libuutil.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libdisasm.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libexacct.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libidmap.so.1</base_include>
+			<base_include type="file">/usr/lib/64/liblzma.so.5</base_include>
+			<base_include type="file">/usr/lib/64/libpool.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libproject.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libsaveargs.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libxml2.so.2</base_include>
+			<base_include type="file">/usr/lib/64/libz.so.1</base_include>
+
+			<!-- libraries for /usr/bin/svcs-->
+			<base_include type="file">/lib/libctf.so.1</base_include>
+			<base_include type="file">/lib/libdwarf.so.1</base_include>
+			<base_include type="file">/lib/libelf.so.1</base_include>
+			<base_include type="file">/lib/libproc.so.1</base_include>
+			<base_include type="file">/lib/librtld_db.so.1</base_include>
+			<base_include type="file">/usr/lib/libbrand.so.1</base_include>
+			<base_include type="file">/usr/lib/libzonecfg.so.1</base_include>
+
+			<!-- libraries for /usr/sbin/format -->
+			<base_include type="file">lib/libadm.so.1</base_include>
+			<base_include type="file">lib/libefi.so.1</base_include>
+			<base_include type="file">lib/libevid.so.1</base_include>
+			<base_include type="file">lib/libsysevent.so.1</base_include>
+			<base_include type="file">usr/lib/libdiskmgt.so.1</base_include>
+			<base_include type="file">usr/lib/libsmbios.so.1</base_include>
+
+			<!-- libraries for /usr/sbin/svccfg -->
+			<base_include type="file">lib/libscf.so.1</base_include>
+			<base_include type="file">lib/libuutil.so.1</base_include>
+			<base_include type="file">lib/libumem.so.1</base_include>
+			<base_include type="file">lib/64/libumem.so.1</base_include>
+			<base_include type="file">lib/libmd5.so.1</base_include>
+			<base_include type="file">lib/libnvpair.so.1</base_include>
+			<base_include type="file">lib/libc.so.1</base_include>
+			<base_include type="file">lib/64/libc.so.1</base_include>
+			<base_include type="file">lib/libpthread.so.1</base_include>
+			<base_include type="file">lib/libnsl.so.1</base_include>
+			<base_include type="file">lib/64/libnsl.so.1</base_include>
+			<base_include type="file">lib/libgen.so.1</base_include>
+			<base_include type="file">lib/libsocket.so.1</base_include>
+			<base_include type="file">lib/64/libsocket.so.1</base_include>
+			<base_include type="file">lib/libcurses.so.1</base_include>
+			<base_include type="file">lib/libmp.so.2</base_include>
+			<base_include type="file">lib/64/libmp.so.2</base_include>
+			<base_include type="file">lib/libmd.so.1</base_include>
+			<base_include type="file">lib/64/libmd.so.1</base_include>
+			<base_include type="file">usr/lib/libxml2.so.2</base_include>
+			<base_include type="file">usr/lib/libl.so.1</base_include>
+			<base_include type="file">usr/lib/libtecla.so.1</base_include>
+			<base_include type="file">usr/lib/liblzma.so.5</base_include>
+
+			<!-- 
+			     Files which have to be left uncompressed in boot archive.
+			-->
+			<base_include type="file" fiocompress="false">etc/svc/repository.db</base_include>
+			<base_include type="file" fiocompress="false">etc/dev/.devfsadm_dev.lock</base_include>
+			<base_include type="file" fiocompress="false">etc/name_to_major</base_include>
+			<base_include type="file" fiocompress="false">etc/minor_perm</base_include>
+			<base_include type="file" fiocompress="false">etc/driver_aliases</base_include>
+			<base_include type="file" fiocompress="false">etc/driver_classes</base_include>
+			<base_include type="file" fiocompress="false">etc/path_to_inst</base_include>
+			<base_include type="file" fiocompress="false">etc/default/init</base_include>
+			<base_include type="file" fiocompress="false">etc/nsswitch.conf</base_include>
 		</boot_archive_contents>
 	</img_params>
 	<key_value_pairs>
diff --git a/usr/src/cmd/distro_const/text_install/text_mode_x86_minimal.xml b/usr/src/cmd/distro_const/text_install/text_mode_x86_minimal.xml
index 32d5fe74..cd84bae1 100644
--- a/usr/src/cmd/distro_const/text_install/text_mode_x86_minimal.xml
+++ b/usr/src/cmd/distro_const/text_install/text_mode_x86_minimal.xml
@@ -99,6 +99,11 @@
 						".textinstall"
 					</argslist>
 				</script>
+				<script name="/usr/share/distro_const/boot_archive_compress_usr">
+					<checkpoint
+						name="ba-usrtar"
+						message="Boot archive compress /usr"/>
+				</script>
 				<script name="/usr/share/distro_const/boot_archive_archive.py">
 					<checkpoint
 						name="ba-arch"
@@ -303,108 +308,107 @@
 		     must exist in the pkg_image area.
 		-->
 		<boot_archive_contents>
-			<base_include type="file">usr/bin/nawk</base_include>
-			<base_include type="file">usr/bin/mkdir</base_include>
-			<base_include type="file">usr/bin/cp</base_include>
-			<base_include type="file">usr/bin/sed</base_include>
-			<base_include type="file">usr/bin/sort</base_include>
-			<base_include type="file">usr/bin/amd64/sort</base_include>
-			<base_include type="file">usr/bin/i86/sort</base_include>
-			<base_include type="file">usr/bin/pkill</base_include>
-			<base_include type="file">usr/sbin/svcadm</base_include>
-			<base_include type="file">usr/sbin/svccfg</base_include>
-			<base_include type="file">usr/sbin/prtconf</base_include>
-			<base_include type="file">usr/sbin/amd64/prtconf</base_include>
-			<base_include type="file">usr/sbin/i86/prtconf</base_include>
-			<base_include type="file">usr/sbin/nwamcfg</base_include>
-			<base_include type="file">usr/sbin/nwamadm</base_include>
-
-			<!-- libraries needed by /usr/bin/bash -->
-			<base_include type="file">usr/lib/64/libncurses.so.5</base_include>
-			<base_include type="file">usr/lib/64/libncurses.so.5.9</base_include>
-
-			<!-- libraries needed by /usr/sbin/prtconf -->
-			<base_include type="file">usr/lib/libsmbios.so.1</base_include>
-
-			<!-- libraries needed by /usr/sbin/svccfg -->
-			<base_include type="file">usr/lib/libtecla.so.1</base_include>
-			<base_include type="file">usr/lib/libl.so.1</base_include>
-			<base_include type="file">usr/lib/libexacct.so.1</base_include>
-			<base_include type="file">usr/lib/libpool.so.1</base_include>
-			<base_include type="file">usr/lib/libidmap.so.1</base_include>
-			<base_include type="file">usr/lib/libldap.so.5</base_include>
-			<base_include type="file">usr/lib/libldap.so.1</base_include>
-			<base_include type="file">usr/lib/libadutils.so.1</base_include>
-			<base_include type="file">usr/lib/libsasl.so.1</base_include>
-			<base_include type="file">usr/lib/mps/libnspr4.so</base_include>
-			<base_include type="file">usr/lib/mps/libplc4.so</base_include>
-			<base_include type="file">usr/lib/mps/libnss3.so</base_include>
-			<base_include type="file">usr/lib/mps/libssl3.so</base_include>
-			<base_include type="file">usr/lib/mps/libnssutil3.so</base_include>
-			<base_include type="file">usr/lib/mps/libplds4.so</base_include>
-
-			<base_include type="file">usr/sbin/pmadm</base_include>
-			<base_include type="file">usr/sbin/lofiadm</base_include>
-			<base_include type="file">usr/sbin/devfsadm</base_include>
-			<base_include type="file">usr/sbin/modload</base_include>
-			<base_include type="file">usr/sbin/i86/modload</base_include>
-			<base_include type="file">usr/sbin/mount</base_include>
-			<base_include type="file">usr/sbin/hostconfig</base_include>
-			<base_include type="file">usr/sbin/chroot</base_include>
-			<base_include type="file">usr/sbin/syslogd</base_include>
-			<base_include type="file">usr/bin/coreadm</base_include>
 			<base_include type="file">usr/bin/bash</base_include>
-			<base_include type="file">usr/bin/ksh</base_include>
 			<base_include type="file">usr/bin/cat</base_include>
+			<base_include type="file">usr/bin/cd</base_include>
+			<base_include type="file">usr/bin/cp</base_include>
+			<base_include type="file">usr/bin/coreadm</base_include>
+			<base_include type="file">usr/bin/cut</base_include>
 			<base_include type="file">usr/bin/echo</base_include>
+			<base_include type="file">usr/bin/expr</base_include>
 			<base_include type="file">usr/bin/false</base_include>
+			<base_include type="file">usr/bin/file</base_include>
 			<base_include type="file">usr/bin/grep</base_include>
+			<base_include type="file">usr/bin/i86/ksh93</base_include>
+			<base_include type="file">usr/bin/ldd</base_include>
+			<base_include type="file">usr/bin/less</base_include>
 			<base_include type="file">usr/bin/ls</base_include>
+			<base_include type="file">usr/bin/mkdir</base_include>
+			<base_include type="file">usr/bin/more</base_include>
+			<base_include type="file">usr/bin/nawk</base_include>
+			<base_include type="file">usr/bin/pkill</base_include>
+			<base_include type="file">usr/bin/ps</base_include>
 			<base_include type="file">usr/bin/rm</base_include>
+			<base_include type="file">usr/bin/sed</base_include>
+			<base_include type="file">usr/bin/sleep</base_include>
+			<base_include type="file">usr/bin/sort</base_include>
 			<base_include type="file">usr/bin/svcprop</base_include>
-			<base_include type="file">usr/bin/true</base_include>
-			<base_include type="file">usr/bin/cd</base_include>
+			<base_include type="file">usr/bin/svcs</base_include>
+			<base_include type="file">usr/bin/tail</base_include>
 			<base_include type="file">usr/bin/test</base_include>
-			<base_include type="file">usr/bin/sleep</base_include>
-			<base_include type="file">usr/bin/expr</base_include>
+			<base_include type="file">usr/bin/true</base_include>
 			<base_include type="file">usr/bin/vi</base_include>
+			<base_include type="file">usr/bin/which</base_include>
 			<base_include type="file">usr/has/bin/vi</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_audio_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_cfg_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_disk_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_fssnap_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_ieee1394_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_lofi_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_misc_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_port_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_ramdisk_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_sgen_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_tape_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_usb_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/linkmod/SUNW_zfs_link.so</base_include>
+			<base_include type="file">usr/lib/devfsadm/devfsadmd</base_include>
 			<base_include type="file">usr/lib/fs/hsfs/fstyp</base_include>
 			<base_include type="file">usr/lib/fs/hsfs/fstyp.so.1</base_include>
 			<base_include type="file">usr/lib/fs/hsfs/mount</base_include>
+			<base_include type="file">usr/lib/fs/tmpfs/mount</base_include>
 			<base_include type="file">usr/lib/fs/ufs/fstyp</base_include>
 			<base_include type="file">usr/lib/fs/ufs/fstyp.so.1</base_include>
 			<base_include type="file">usr/lib/fs/ufs/mount</base_include>
-			<base_include type="file">usr/lib/libfstyp.so.1</base_include>
-			<base_include type="file">usr/lib/platexec</base_include>
-			<base_include type="file">usr/lib/devfsadm/devfsadmd</base_include>
-			<base_include type="file">usr/lib/libm.so.2</base_include>
-			<base_include type="file">usr/lib/libm.so</base_include>
-			<base_include type="file">usr/lib/libfstyp.so</base_include>
-			<base_include type="file">usr/lib/libz.so</base_include>
-			<base_include type="file">usr/lib/libz.so.1</base_include>
-			<base_include type="file">usr/bin/i86/ksh93</base_include>
 			<base_include type="file">usr/lib/isaexec</base_include>
 			<base_include type="file">usr/lib/libast.so.1</base_include>
+			<base_include type="file">usr/lib/64/libast.so.1</base_include>
 			<base_include type="file">usr/lib/libcmd.so.1</base_include>
+			<base_include type="file">usr/lib/64/libcmd.so.1</base_include>
+			<base_include type="file">usr/lib/libcrypt.so.1</base_include>
 			<base_include type="file">usr/lib/libdll.so.1</base_include>
+			<base_include type="file">usr/lib/64/libdll.so.1</base_include>
+			<base_include type="file">usr/lib/libfstyp.so</base_include>
+			<base_include type="file">usr/lib/libfstyp.so.1</base_include>
+			<base_include type="file">usr/lib/libm.so</base_include>
+			<base_include type="file">usr/lib/libm.so.2</base_include>
+			<base_include type="file">usr/lib/64/libm.so</base_include>
+			<base_include type="file">usr/lib/64/libm.so.2</base_include>
+			<base_include type="file">usr/lib/libmapmalloc.so.1</base_include>
 			<base_include type="file">usr/lib/libshell.so.1</base_include>
+			<base_include type="file">usr/lib/64/libshell.so.1</base_include>
+			<base_include type="file">usr/lib/libz.so</base_include>
+			<base_include type="file">usr/lib/libz.so.1</base_include>
+			<base_include type="file">usr/lib/platexec</base_include>
+			<base_include type="file">usr/sbin/chroot</base_include>
+			<base_include type="file">usr/sbin/devfsadm</base_include>
+			<base_include type="file">usr/sbin/df</base_include>
+			<base_include type="file">usr/sbin/format</base_include>
+			<base_include type="file">usr/sbin/hostconfig</base_include>
+			<base_include type="file">usr/sbin/lofiadm</base_include>
+			<base_include type="file">usr/sbin/modload</base_include>
+			<base_include type="file">usr/sbin/mount</base_include>
+			<base_include type="file">usr/sbin/nwamadm</base_include>
+			<base_include type="file">usr/sbin/nwamcfg</base_include>
+			<base_include type="file">usr/sbin/ping</base_include>
+			<base_include type="file">usr/sbin/pmadm</base_include>
+			<base_include type="file">usr/sbin/prtconf</base_include>
+			<base_include type="file">usr/sbin/prtvtoc</base_include>
+			<base_include type="file">usr/sbin/svcadm</base_include>
+			<base_include type="file">usr/sbin/svccfg</base_include>
+			<base_include type="file">usr/sbin/syslogd</base_include>
 			<base_include type="file">usr/share/lib/xml/dtd/service_bundle.dtd.1</base_include>
-			<base_include type="file">var/sadm/install/admin/default</base_include>
-			<base_include type="file">var/sadm/system/admin/default_java</base_include>
-			<base_include type="file">var/sadm/install/contents</base_include>
 			<base_include type="file">var/adm/utmpx</base_include>
 			<base_include type="file">var/adm/wtmpx</base_include>
 			<base_include type="file">var/adm/aculog</base_include>
-			<base_include type="file">var/lib/postrun/postrun-runq</base_include>
-			<base_include type="file">var/lib/postrun/postrun</base_include>
-			<base_include type="file">var/log/postrun.log</base_include>
 			<base_include type="file">var/log/authlog</base_include>
 			<base_include type="file">var/log/syslog</base_include>
+			<base_include type="file">var/sadm/install/admin/default</base_include>
+			<base_include type="file">var/sadm/install/contents</base_include>
 			<base_include type="file">var/saf/zsmon/log</base_include>
 			<base_include type="file">var/spool/cron/crontabs/adm</base_include>
 			<base_include type="file">var/spool/cron/crontabs/root</base_include>
-			<base_include type="file">var/nis/NIS+LDAPmapping.template</base_include>
 			<base_include type="file">var/yp/aliases</base_include>
 			<base_include type="file">var/yp/nicknames</base_include>
 			<base_include type="dir">kernel</base_include>
@@ -422,11 +426,131 @@
 			<base_include type="dir">var/svc/profile</base_include>
 			<base_include type="dir">var/sadm</base_include>
 			<base_include type="dir">etc</base_include>
-			<base_exclude type="dir">etc/gconf</base_exclude>
-			<base_exclude type="dir">etc/brltty</base_exclude>
-			<base_exclude type="dir">etc/gtk-2.0</base_exclude>
 			<base_exclude type="dir">etc/notices</base_exclude>
 			<base_exclude type="dir">var/sadm/pkg</base_exclude>
+
+			<!-- libraries for /lib/svc/method/svc-fcoei BugID: #16318-->
+			<base_include type="file">lib/libavl.so.1</base_include>
+			<base_include type="file">lib/libdevinfo.so.1</base_include>
+			<base_include type="file">lib/libdladm.so.1</base_include>
+			<base_include type="file">lib/libinetutil.so.1</base_include>
+			<base_include type="file">lib/libkstat.so.1</base_include>
+			<base_include type="file">lib/libofmt.so.1</base_include>
+			<base_include type="file">lib/librcm.so.1</base_include>
+			<base_include type="file">lib/libsec.so.1</base_include>
+			<base_include type="file">lib/libvarpd.so.1</base_include>
+			<base_include type="file">usr/lib/libexacct.so.1</base_include>
+			<base_include type="file">usr/lib/libfcoe.so.1</base_include>
+			<base_include type="file">usr/lib/libidmap.so.1</base_include>
+			<base_include type="file">usr/lib/libidspace.so.1</base_include>
+			<base_include type="file">usr/lib/libpool.so.1</base_include>
+			<base_include type="file">usr/lib/librename.so.1</base_include>
+
+			<!-- libraries for /sbin/ifconfig|/lib/svc/method/net-netmask BugID: #16318-->
+			<base_include type="file">lib/libcmdutils.so.1</base_include>
+			<base_include type="file">lib/libcontract.so.1</base_include>
+			<base_include type="file">lib/libcustr.so.1</base_include>
+			<base_include type="file">lib/libdhcpagent.so.1</base_include>
+			<base_include type="file">lib/libdhcputil.so.1</base_include>
+			<base_include type="file">lib/libdlpi.so.1</base_include>
+			<base_include type="file">lib/libipadm.so.1</base_include>
+			<base_include type="file">lib/libipmp.so.1</base_include>
+			<base_include type="file">lib/libsecdb.so.1</base_include>
+			<base_include type="file">lib/libuuid.so.1</base_include>
+			<base_include type="file">lib/libxnet.so.1</base_include>
+
+			<!-- libraries for /sbin/dladm BugID: #16318-->
+			<base_include type="file">lib/libbsm.so.1</base_include>
+			<base_include type="file">usr/lib/librstp.so.1</base_include>
+			<base_include type="file">usr/lib/libtsol.so.2</base_include>
+
+			<!-- libraries for /usr/bin/bash -->
+			<base_include type="file">usr/lib/64/libncurses.so.5</base_include>
+			<base_include type="file">usr/lib/64/libncurses.so.5.9</base_include>
+
+			<!-- libraries for /usr/bin/cut BugID: #16318-->
+			<base_include type="file">usr/lib/64/libsum.so.1</base_include>
+
+			<!-- libraries for /usr/bin/ps-->
+			<base_include type="file">/lib/64/libavl.so.1</base_include>
+			<base_include type="file">/lib/64/libctf.so.1</base_include>
+			<base_include type="file">/lib/64/libdevinfo.so.1</base_include>
+			<base_include type="file">/lib/64/libdwarf.so.1</base_include>
+			<base_include type="file">/lib/64/libelf.so.1</base_include>
+			<base_include type="file">/lib/64/libgen.so.1</base_include>
+			<base_include type="file">/lib/64/libnvpair.so.1</base_include>
+			<base_include type="file">/lib/64/libproc.so.1</base_include>
+			<base_include type="file">/lib/64/libpthread.so.1</base_include>
+			<base_include type="file">/lib/64/librtld.so.1</base_include>
+			<base_include type="file">/lib/64/libscf.so.1</base_include>
+			<base_include type="file">/lib/64/libsec.so.1</base_include>
+			<base_include type="file">/lib/64/libsecdb.so.1</base_include>
+			<base_include type="file">/lib/64/libsmbios.so.1</base_include>
+			<base_include type="file">/lib/64/libuutil.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libdisasm.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libexacct.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libidmap.so.1</base_include>
+			<base_include type="file">/usr/lib/64/liblzma.so.5</base_include>
+			<base_include type="file">/usr/lib/64/libpool.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libproject.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libsaveargs.so.1</base_include>
+			<base_include type="file">/usr/lib/64/libxml2.so.2</base_include>
+			<base_include type="file">/usr/lib/64/libz.so.1</base_include>
+
+			<!-- libraries for /usr/bin/svcs-->
+			<base_include type="file">/lib/libctf.so.1</base_include>
+			<base_include type="file">/lib/libdwarf.so.1</base_include>
+			<base_include type="file">/lib/libelf.so.1</base_include>
+			<base_include type="file">/lib/libproc.so.1</base_include>
+			<base_include type="file">/lib/librtld_db.so.1</base_include>
+			<base_include type="file">/usr/lib/libbrand.so.1</base_include>
+			<base_include type="file">/usr/lib/libzonecfg.so.1</base_include>
+
+			<!-- libraries for /usr/sbin/format -->
+			<base_include type="file">lib/libadm.so.1</base_include>
+			<base_include type="file">lib/libefi.so.1</base_include>
+			<base_include type="file">lib/libevid.so.1</base_include>
+			<base_include type="file">lib/libsysevent.so.1</base_include>
+			<base_include type="file">usr/lib/libdiskmgt.so.1</base_include>
+			<base_include type="file">usr/lib/libsmbios.so.1</base_include>
+
+			<!-- libraries for /usr/sbin/svccfg -->
+			<base_include type="file">lib/libscf.so.1</base_include>
+			<base_include type="file">lib/libuutil.so.1</base_include>
+			<base_include type="file">lib/libumem.so.1</base_include>
+			<base_include type="file">lib/64/libumem.so.1</base_include>
+			<base_include type="file">lib/libmd5.so.1</base_include>
+			<base_include type="file">lib/libnvpair.so.1</base_include>
+			<base_include type="file">lib/libc.so.1</base_include>
+			<base_include type="file">lib/64/libc.so.1</base_include>
+			<base_include type="file">lib/libpthread.so.1</base_include>
+			<base_include type="file">lib/libnsl.so.1</base_include>
+			<base_include type="file">lib/64/libnsl.so.1</base_include>
+			<base_include type="file">lib/libgen.so.1</base_include>
+			<base_include type="file">lib/libsocket.so.1</base_include>
+			<base_include type="file">lib/64/libsocket.so.1</base_include>
+			<base_include type="file">lib/libcurses.so.1</base_include>
+			<base_include type="file">lib/libmp.so.2</base_include>
+			<base_include type="file">lib/64/libmp.so.2</base_include>
+			<base_include type="file">lib/libmd.so.1</base_include>
+			<base_include type="file">lib/64/libmd.so.1</base_include>
+			<base_include type="file">usr/lib/libxml2.so.2</base_include>
+			<base_include type="file">usr/lib/libl.so.1</base_include>
+			<base_include type="file">usr/lib/libtecla.so.1</base_include>
+			<base_include type="file">usr/lib/liblzma.so.5</base_include>
+
+			<!-- 
+			     Files which have to be left uncompressed in boot archive.
+			-->
+			<base_include type="file" fiocompress="false">etc/svc/repository.db</base_include>
+			<base_include type="file" fiocompress="false">etc/dev/.devfsadm_dev.lock</base_include>
+			<base_include type="file" fiocompress="false">etc/name_to_major</base_include>
+			<base_include type="file" fiocompress="false">etc/minor_perm</base_include>
+			<base_include type="file" fiocompress="false">etc/driver_aliases</base_include>
+			<base_include type="file" fiocompress="false">etc/driver_classes</base_include>
+			<base_include type="file" fiocompress="false">etc/path_to_inst</base_include>
+			<base_include type="file" fiocompress="false">etc/default/init</base_include>
+			<base_include type="file" fiocompress="false">etc/nsswitch.conf</base_include>
 		</boot_archive_contents>
 	</img_params>
 	<key_value_pairs>
diff --git a/usr/src/cmd/distro_const/utils/Makefile b/usr/src/cmd/distro_const/utils/Makefile
index b11d02f0..b5943dc1 100644
--- a/usr/src/cmd/distro_const/utils/Makefile
+++ b/usr/src/cmd/distro_const/utils/Makefile
@@ -48,6 +48,7 @@ DC_UTIL_FILES=	mkrepo \
 		create_usb \
 		gen_cd_content \
 		boot_archive_configure \
+		boot_archive_compress_usr \
 		post_boot_archive_pkg_image_mod \
 		post_boot_archive_pkg_image_mod_custom \
 		generic_live.xml \
diff --git a/usr/src/cmd/distro_const/utils/boot_archive_compress_usr b/usr/src/cmd/distro_const/utils/boot_archive_compress_usr
new file mode 100755
index 00000000..f42fa9de
--- /dev/null
+++ b/usr/src/cmd/distro_const/utils/boot_archive_compress_usr
@@ -0,0 +1,302 @@
+#!/usr/bin/ksh
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+# Copyright 2026 Klaus Ziegler. All rights reserved.
+#
+
+# =============================================================================
+# =============================================================================
+# sparc_usb_confiure - Configure a populated boot archive area including usr
+#			and misc filesystems into a usable boot archive.
+# =============================================================================
+# =============================================================================
+
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# Main
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# Configure a populated boot archive area into a usable boot archive, less archiving.
+# 
+# Args:
+#   MFEST_SOCKET: Socket needed to get manifest data via ManifestRead object
+#
+#   PKG_IMG_PATH: Package image area
+#
+#   TMP_DIR: Temporary directory to contain the boot archive file
+#
+#   BA_BUILD: Area where boot archive is put together.
+#
+#   MEDIA_DIR: Area where the media is put. (Not used)
+#
+# Note: This assumes a populated boot archive area exists at $BA_BUILD.
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+# Verify argument count
+if [ $# != 5 ] ; then
+	print -u2 -f "%s: Requires 5 args: Reader socket, pkg_image area,\n" \
+	    "$0"
+	print -u2 "    tmp dir, boot archive build area, media area,"
+	print -u2 "    img_type_file."
+	exit 1
+fi
+
+# Get commandline args.  First 5 are passed to all finalizer scripts.
+MFEST_SOCKET=$1
+PKG_IMG_PATH=$2
+if [ ! -d $PKG_IMG_PATH ] ; then
+	print -u2 -f "%s: Image package area %s is not valid\n" \
+	    "$0" "$PKG_IMG_PATH"
+	exit 1
+fi
+
+TMP_DIR=$3
+if [ ! -d $TMP_DIR ] ; then
+	print -u2 -f "%s: Temporary area %s is not valid\n" "$0" "$TMP_DIR"
+	exit 1
+fi
+
+BA_BUILD=$4
+if [ ! -d $BA_BUILD ] ; then
+	print -u2 -f "%s: Boot archive build area is not valid\n" "$0"
+	exit 1
+fi
+
+builtin cd
+builtin rm
+builtin mkdir
+builtin mv
+
+# Define a few commands.
+CHGRP=/usr/bin/chgrp
+CHOWN=/usr/bin/chown
+GREP=/usr/bin/grep
+LOFIADM=/usr/sbin/lofiadm
+MKISOFS=/usr/bin/mkisofs
+TIME=/usr/bin/time
+
+# Define non-core-OS commands.
+MANIFEST_READ=/usr/bin/ManifestRead
+
+# Note that DIST_ISO_SORT may or may not exist, given the type of image.
+DIST_ISO_SORT=$($MANIFEST_READ -k $MFEST_SOCKET "iso_sort")
+
+if [ ! -d $PKG_IMG_PATH ] ; then
+	print -u2 -f "%s: Image package area %s is not valid\n" \
+	    "$0" "$PKG_IMG_PATH"
+	exit 1
+fi
+
+cd $PKG_IMG_PATH
+
+# check package dependencies for perl, a combined / and /usr image
+# with two perl version, will simply be to big to be booted.
+NUMVERS=`(cd usr/perl5; ls -1 | sed \
+	-e "/bin/d" \
+	-e "/man/d" \
+	-e "/pod/d" \
+	-e "/site_perl/d" \
+	-e "/vendor_perl/d" | wc -l | awk '{print $1}')`
+
+if [ "$NUMVERS" -ne 1 ]; then
+	PVERS=`(cd usr/perl5; ls -1 | sed \
+		-e "/bin/d" \
+		-e "/man/d" \
+		-e "/pod/d" \
+		-e "/site_perl/d" \
+		-e "/vendor_perl/d")`
+	print -u2 -f "%s: \nImage package area: %s\ncontains more than one Perl-Version:\n%s\n" \
+	    "$0" "$PKG_IMG_PATH" "$PVERS"
+	# try to find out which packages depend on the older version.
+	cd ${PKG_IMG_PATH}/var/pkg/publisher/openindiana.org/pkg
+        rm -rf library%2Fperl-5%2F*
+	cd ${PKG_IMG_PATH}/usr/perl5
+	for VERS in `ls -1 | sed \
+		-e "/bin/d" \
+		-e "/man/d" \
+		-e "/pod/d" \
+		-e "/site_perl/d" \
+		-e "/vendor_perl/d" \
+		-e "s@\.@@g" | sed '$d'`
+	do
+		cd ${PKG_IMG_PATH}/var/pkg/publisher/openindiana.org/pkg
+		rm -rf runtime%2Fperl-${VERS} consolidation%2Fuserland%2Fuserland-incorporation
+		print -u2 -f "Dependencies for: runtime/perl-%s need to be fixed.\n" "$VERS"
+		cd ${PKG_IMG_PATH}/var/pkg/publisher/openindiana.org/pkg
+		find . -type f -exec grep "runtime/perl-${VERS}" {} \; -print
+	done
+	print -u2 "Please check detail-log for list of packages." 
+	cd $PKG_IMG_PATH
+	exit 1
+fi
+
+# sbin, kernel and lib are all in the root archive
+print "Removing sbin, kernel and lib from package image area"
+rm -rf sbin kernel lib tmp/tmp_*
+
+# before we can compress /usr we need to save some essential
+# things needed for the installer.
+cd ${PKG_IMG_PATH}/usr
+# keyboard
+mv share/lib/keytables ..
+# terminal unfortunately both databases are needed.
+mv share/lib/terminfo ..
+# time
+mv share/lib/zoneinfo ..
+# needed to intialize SMF
+mv share/lib/xml ..
+# hal SMF services needs dbus
+mv share/dbus-1 ..
+# prtconf needs share/hwdata/pci.ids
+mv share/hwdata ..
+
+D2REM="apache2 apr apr-util ddu demo dict games has kvm mail man net"
+D2REM="$D2REM news old openssl/3/share perl5 preserve proc pub sfw"
+D2REM="$D2REM share spool src X11 lib/p7zip lib/iconv gnu/share/info"
+D2REM="$D2REM gnu/share/locale gnu/share/man gnu/share/tabset"
+
+for d in $D2REM
+do
+	[ -d $d ] && printf "$d " >> /tmp/boot_archive_compress_usr.$$
+done
+
+# only keep libicuuc.so/libicudata.so in solaris.zlib for zpool/zfs commands.
+cd lib/64
+mv libicuuc.so.* ../../..
+mv libicudata.so.* ../../..
+cd ../..
+echo "lib/64/libicu*" >> /tmp/boot_archive_compress_usr.$$
+
+/usr/bin/gtar cf usr.tar `cat /tmp/boot_archive_compress_usr.$$`
+
+# now clear out usr.
+rm -rf `cat /tmp/boot_archive_compress_usr.$$`
+rm /tmp/boot_archive_compress_usr.$$
+
+print "Compressing usr directories using lzma compression"
+xz -9 usr.tar
+if [ $? -ne 0 ] ; then
+	print -u2 -f "%s: compression of usr directories failed\n" "$0"
+	exit 1	
+fi
+# move compressed /usr into dotfile /.usr.tar.xz
+mv usr.tar.xz ${BA_BUILD}/.usr.tar.xz
+mkdir -p share/lib
+$CHGRP sys share
+$CHGRP sys share/lib
+$CHGRP bin include
+mv ../dbus-1 share
+mv ../hwdata share
+mv ../keytables share/lib
+mv ../terminfo share/lib/terminfo
+mv ../xml share/lib
+mv ../zoneinfo share/lib
+mv ../libicuuc.so.* lib/64
+mv ../libicudata.so.* lib/64
+
+cd $PKG_IMG_PATH
+
+# sbin, kernel and lib are all in the root archive
+print "Removing sbin, kernel and lib from package image area"
+rm -rf sbin kernel lib tmp/tmp_*
+
+print "Generating usr filesystem image"
+if [ ! -d $PKG_IMG_PATH ] ; then
+	print -u2 -f "%s: Image package area %s is not valid\n" \
+	    "$0" "$PKG_IMG_PATH"
+	exit 1
+fi
+
+if [[ "X${DIST_ISO_SORT}" != "X" && -s "${DIST_ISO_SORT}" ]]; then
+	SORT_OPTION="-sort $DIST_ISO_SORT"
+	print "Sorting according to $DIST_ISO_SORT"
+else
+	SORT_OPTION=""
+fi
+
+$MKISOFS -o solaris.zlib $SORT_OPTION -quiet -N -l -R \
+    -U -allow-multidot -no-iso-translate -cache-inodes \
+    -d -D -V "compress" usr
+
+if [ $? -ne 0 ] ; then
+	print -u2 -f "%s: mkisofs of solaris failed\n" "$0"
+	exit 1	
+fi
+
+print "Confirm lofiadm is available in image..."
+if [ ! -f ${PKG_IMG_PATH}${LOFIADM} ] ; then
+	print -u2 -f "%s: %s%s NOT FOUND\n" "$0" "${PKG_IMG_PATH}" "${LOFIADM}"
+	exit 1
+fi
+
+LOFI_OUT_STR=${TMP_DIR}/lofi_out_str.$$
+
+USER_ZLIB_ALG=lzma
+print "Compressing usr filesystem image using compression algorithm: ${USER_ZLIB_ALG}"
+LD_LIBRARY_PATH=${PKG_IMG_PATH}/usr/lib $TIME ${PKG_IMG_PATH}/${LOFIADM} \
+    -C ${USER_ZLIB_ALG} ${PKG_IMG_PATH}/solaris.zlib >/dev/null \
+    2>$LOFI_OUT_STR
+if [ $? -ne 0 ] ; then
+	$GREP "invalid algorithm name" $LOFI_OUT_STR
+	if [ $? -eq 0 ] ; then
+		print -u2 -f "%s: %s is an invalid lofiadm algorithm\n." \
+		    "$0" "${USER_ZLIB_ALG}"
+		print -u2 "Please modify your USER_ZLIB_ALG parameter."
+		rm $LOFI_OUT_STR
+		exit 1
+	fi
+	rm $LOFI_OUT_STR
+	print -u2 -f "%s: compression of usr filesystem failed\n" "$0"
+	exit 1	
+fi
+rm $LOFI_OUT_STR
+mv ${PKG_IMG_PATH}/solaris.zlib ${BA_BUILD}
+
+print "Generating misc filesystem image"
+if [ ! -d $PKG_IMG_PATH ] ; then
+	print -u2 -f "%s: Image package area %s is not valid\n" \
+	    "$0" "$PKG_IMG_PATH"
+	exit 1
+fi
+cd $PKG_IMG_PATH
+mkdir miscdirs
+mv opt miscdirs
+mv etc miscdirs
+mv var miscdirs
+$MKISOFS -o solarismisc.zlib -N -l -R -U -allow-multidot \
+    -no-iso-translate \
+    -quiet -cache-inodes -d -D -V "compress" miscdirs
+if [ "$?" != "0" ] ; then
+	print -u2 -f "%s: mkisofs of solarismisc failed\n" "$0"
+	exit 1	
+fi
+rm -rf miscdirs
+
+COMPRESSION_TYPE=lzma
+print "Compressing misc filesystem image using compression algorithm: ${COMPRESSION_TYPE}"
+LD_LIBRARY_PATH=${PKG_IMG_PATH}/usr/lib $TIME ${PKG_IMG_PATH}${LOFIADM} \
+    -C $COMPRESSION_TYPE ${PKG_IMG_PATH}/solarismisc.zlib >/dev/null 2>&1
+if [ "$?" != "0" ] ; then
+	print -u2 -f "%s: compression of solarismisc failed\n" "$0"
+	exit 1	
+fi
+mv ${PKG_IMG_PATH}/solarismisc.zlib ${BA_BUILD}
+
+exit 0
diff --git a/usr/src/cmd/distro_const/utils/boot_archive_configure b/usr/src/cmd/distro_const/utils/boot_archive_configure
old mode 100644
new mode 100755
index ee75628a..db63f90c
--- a/usr/src/cmd/distro_const/utils/boot_archive_configure
+++ b/usr/src/cmd/distro_const/utils/boot_archive_configure
@@ -260,6 +260,15 @@ rm $TMP_DIR/hosts.mod
 # concurrent. Leading to a complex loop.
 $MV ${BA_BUILD}/lib/svc/manifest/network/varpd.xml ${BA_BUILD}/lib
 
+# modify dhcpagent default, to enable NIS/NTP lookups in new installer,
+# of course this has to be removed it the defaults in illumos-gate change.
+$MV ${BA_BUILD}/etc/default/dhcpagent ${BA_BUILD}/etc/default/dhcpagent.orig
+$SED \
+	-e "s@3,6@3,4,6@g" \
+	-e "s@28,43@28,40,41,42,43@g" \
+	${BA_BUILD}/etc/default/dhcpagent.orig > ${BA_BUILD}/etc/default/dhcpagent
+chgrp sys ${BA_BUILD}/etc/default/dhcpagent
+
 print "Preloading SMF repository..."
 
 $MKREPO $BA_BUILD $PKG_IMG_PATH
diff --git a/usr/src/cmd/distro_const/utils/post_boot_archive_pkg_image_mod b/usr/src/cmd/distro_const/utils/post_boot_archive_pkg_image_mod
index eac2bc04..b9fff651 100755
--- a/usr/src/cmd/distro_const/utils/post_boot_archive_pkg_image_mod
+++ b/usr/src/cmd/distro_const/utils/post_boot_archive_pkg_image_mod
@@ -102,6 +102,11 @@ if [ ! -d ${BA_BUILD} ] ; then
 	exit 1
 fi
 
+if [  -f ${BA_BUILD}/.usr.tar.xz ] ; then
+	rm -rf ${PKG_IMG_PATH}/usr
+	exit 0
+fi
+
 # Copying volsetid to live CD root		
 cp ${BA_BUILD}/.volsetid ${PKG_IMG_PATH}
 
@@ -137,7 +142,7 @@ DIST_ISO_SORT=$($MANIFEST_READ -k $MFEST_SOCK "iso_sort")
 # package installation; if left in place it becomes a symlink
 # into /mnt/misc which will cause the installer's attempt to
 # create a user account to fail
-rm ${PKG_IMG_PATH}/etc/.pwd.lock
+rm -f ${PKG_IMG_PATH}/etc/.pwd.lock
 
 if [ ! -d $PKG_IMG_PATH ] ; then
 	print -u2 -f "%s: Image package area %s is not valid\n" \
diff --git a/usr/src/cmd/slim-install/svc/live_fs_include.sh b/usr/src/cmd/slim-install/svc/live_fs_include.sh
index 575bf71a..7f9ce1c1 100644
--- a/usr/src/cmd/slim-install/svc/live_fs_include.sh
+++ b/usr/src/cmd/slim-install/svc/live_fs_include.sh
@@ -43,95 +43,6 @@ libc_mount() {
 	fi
 }
 
-#
-# sun4v_libc_psr_mount
-#
-# This mount function is sun4v only. It may be melded with the sun4u-us3
-# version later.
-#
-sun4v_libc_psr_mount() {
-	LIBC_MOE_32=`/usr/bin/moe -32 /platform/$PLAT/lib/libc_psr/'$HWCAP'`
-	if [ -n "$LIBC_MOE_32" ]; then
-		/usr/sbin/mount |
-		    egrep -s "^/platform/[^/]*/lib/libc_psr.so.1 on "
-		if [ $? -ne 0 ]; then
-			/usr/sbin/mount -O -F lofs $LIBC_MOE_32 \
-			    /platform/$PLAT/lib/libc_psr.so.1
-		fi
-	fi
-
-	LIBC_MOE_64=`/usr/bin/moe -64 \
-	    /platform/$PLAT/lib/sparcv9/libc_psr/'$HWCAP'`
-	if [ -n "$LIBC_MOE_64" ]; then
-		/usr/sbin/mount |
-		    egrep -s "^/platform/[^/]*/lib/sparcv9/libc_psr.so.1 on "
-		if [ $? -ne 0 ]; then
-			/usr/sbin/mount -O -F lofs $LIBC_MOE_64 \
-			    /platform/$PLAT/lib/sparcv9/libc_psr.so.1
-		fi
-	fi
-}
-
-#
-# sun4u_libc_psr_mount
-#
-# This is specific to sun4u[-us3].
-# try to intelligently handle the various ways that a hwcap library can
-# be present for libc_psr for sun4u.
-#
-sun4u_libc_psr_mount() {
-	# first look for $PLAT specific
-	# the string $HWCAP is not an env var but part of the argument to moe
-	LIBC_MOE_32=`/usr/bin/moe -32 /platform/$PLAT/lib/libc_psr/'$HWCAP'`
-	if [ -n "$LIBC_MOE_32" ]; then
-		/usr/sbin/mount |
-		    egrep -s "^/platform/$PLAT/lib/libc_psr.so.1 on "
-		if [ $? -ne 0 ]; then
-			/usr/sbin/mount -O -F lofs $LIBC_MOE_32 \
-			    /platform/$PLAT/lib/libc_psr.so.1
-		fi
-	else
-		# try the 'generic' one under $ARCH
-		LIBC_MOE_32=`/usr/bin/moe -32 \
-		    /platform/$ARCH/lib/libc_psr/'$HWCAP'`
-		if [ -n "$LIBC_MOE_32" ]; then
-			/usr/sbin/mount |
-			    egrep -s "^/platform/$ARCH/lib/libc_psr.so.1 on "
-			if [ $? -ne 0 ]; then
-				/usr/sbin/mount -O -F lofs $LIBC_MOE_32 \
-				    /platform/$ARCH/lib/libc_psr.so.1
-			fi
-		fi
-
-	fi
-
-	# now repeat for 64 bit.
-
-	LIBC_MOE_64=`/usr/bin/moe -64 \
-	    /platform/$PLAT/lib/sparcv9/libc_psr/'$HWCAP'`
-	if [ -n "$LIBC_MOE_64" ]; then
-		/usr/sbin/mount |
-		    egrep -s "^/platform/$PLAT/lib/sparcv9/libc_psr.so.1 on "
-		if [ $? -ne 0 ]; then
-			/usr/sbin/mount -O -F lofs $LIBC_MOE_64 \
-			    /platform/$PLAT/lib/sparcv9/libc_psr.so.1
-		fi
-	else
-		# now try $ARCH version
-		LIBC_MOE_64=`/usr/bin/moe -64 \
-		    /platform/$ARCH/lib/sparcv9/libc_psr/'$HWCAP'`
-		if [ -n "$LIBC_MOE_64" ]; then
-			/usr/sbin/mount |
-			    egrep -s \
-			    "^/platform/$ARCH/lib/sparcv9/libc_psr.so.1 on "
-			if [ $? -ne 0 ]; then
-				/usr/sbin/mount -O -F lofs $LIBC_MOE_64 \
-				    /platform/$ARCH/lib/sparcv9/libc_psr.so.1
-			fi
-		fi
-	fi
-}
-
 #
 # Update runtime linker cache
 #
@@ -140,10 +51,10 @@ update_linker_cache()
 	if [ -f /etc/crle.conf ]
 	then
 
-		PATH=/usr/foss/bin:/usr/foss/firefox/bin:/usr/foss/thunderbird/bin:/sbin:/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/X11R6/bin:/opt/DTT/bin
+		PATH=/sbin:/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/X11R6/bin:/opt/DTT/bin
 		export PATH
 
-		LD_LIBRARY_PATH=/usr/foss/lib:/lib:/usr/lib:/usr/sfw/lib:/usr/X11R6/lib
+		LD_LIBRARY_PATH=/lib:/usr/lib:/usr/sfw/lib:/usr/X11R6/lib
 		export LD_LIBRARY_PATH
 
 		. /etc/crle.conf
diff --git a/usr/src/cmd/slim-install/svc/media-fs-root b/usr/src/cmd/slim-install/svc/media-fs-root
index 5195afc8..9a404fab 100644
--- a/usr/src/cmd/slim-install/svc/media-fs-root
+++ b/usr/src/cmd/slim-install/svc/media-fs-root
@@ -43,14 +43,30 @@ TEXTINSTALL=0
 [ -f /.autoinstall ] && AUTOINSTALL=1
 [ -f /.textinstall ] && TEXTINSTALL=1
 
+#
+# Set up the terminal correctly for prompting
+#
+CPU=`/usr/bin/uname -p` 
+if [ "$CPU" = i386 ] && [ $LIVECD = 1 ]; then
+	TERM=sun-color
+elif [ "$CPU" = sparc ] && [ $LIVECD = 1 ]; then
+	TERM=sun
+else
+	TERM=xterm
+fi
+export TERM
+if [ "$TERM" = xterm ] && [ -x /sbin/resize ]; then
+	/sbin/resize
+fi
+
 PRTCONF=/usr/sbin/prtconf
 SED=/usr/bin/sed
 CUT=/usr/bin/cut
 MOUNT=/sbin/mount
 
 # compressed archives
-SOLARIS_ZLIB="solaris.zlib"
-SOLARISMISC_ZLIB="solarismisc.zlib"
+SOLARIS_ZLIB="/.cdrom/solaris.zlib"
+SOLARISMISC_ZLIB="/.cdrom/solarismisc.zlib"
 
 . /lib/svc/share/live_fs_include.sh
 . /lib/svc/share/smf_include.sh
@@ -80,11 +96,12 @@ do
 	fi
 	if [ $? -eq 0 ]; then
 		$MOUNT -F $FSTYP -o $OPTIONS $dev /.cdrom || break
-		if [[ "$volsetid" != "$( < "/.cdrom/.volsetid" )" ]]; then
+		[ -f /.cdrom/.volsetid ] && cdvolsetid=$( < "/.cdrom/.volsetid" )
+		if [ "$volsetid" != "$cdvolsetid" ]; then
 			/sbin/umount -f $dev
 			continue
 		fi
-		if [ -f /.cdrom/$SOLARIS_ZLIB ]; then
+		if [ -f $SOLARIS_ZLIB ]; then
 			echo "" > /.liveusb
 			break
 		else
@@ -109,8 +126,8 @@ do
 	fi
 done
 
-# ... else try network (NFS)
-if ! $MOUNT | grep -q "^/.cdrom" ; then
+# ... else try network (NFS), only if /solaris.zlib isn't allready there.
+if [ ! $MOUNT | grep -q "^/.cdrom" ] || [ ! -f /.liveusb ] || [ ! -f /solaris.zlib ]; then
 	# Wait up to 60 seconds until network is up
 	RETRIES=0
 	until
@@ -147,52 +164,62 @@ if ! $MOUNT | grep -q "^/.cdrom" ; then
 	fi
 fi
 
-# Check if mount of /.cdrom failed.
-$MOUNT | grep "^/.cdrom"
-if [ $? -ne 0 ]; then
-	echo "** FATAL **: Unable to access media"
-	exit $SMF_EXIT_ERR_FATAL
+# copy the compressed zlibs to /tmp for single device illumos stream install.
+if [ ! -f /.cdrom/solaris.zlib ]; then
+	echo "Using tmpfs filesystem for installation" > /dev/msglog
+	SOLARIS_ZLIB="/tmp/solaris.zlib"
+	SOLARISMISC_ZLIB="/tmp/solarismisc.zlib"
+	$MOUNT /tmp
+	cp /solaris.zlib /tmp
+	cp /solarismisc.zlib /tmp
 fi
 
 # Explictly create lofi devices for solaris.zlib and 
 # solarismisc.zlib
-
-
 #
 # Can not mount solaris.zlib using just the mount command,
 # because the mount command enforces nosetuid, and /usr
 # needs to have the setuid capability.
 #
-#
 # Must use lofiadm in combination with the mount command,
 # as with the changes to make lofi work from within a zone,
 # a properly populated /dev tree is required to use simply
 # "mount" - this applies to both .zlib files.
 #
-usr_lofi_dev=$(/usr/sbin/lofiadm -a /.cdrom/$SOLARIS_ZLIB)
+usr_lofi_dev=$(/usr/sbin/lofiadm -a $SOLARIS_ZLIB)
 if [ $? -ne 0 -o -z "$usr_lofi_dev" ]; then
-	echo "lofiadm of /usr FAILED!" 
+	echo "lofiadm of /usr FAILED!" > /dev/msglog
 	exit $SMF_EXIT_ERR_FATAL
 fi
 $MOUNT -F hsfs -o ro ${usr_lofi_dev} /usr
 if [ $? -ne 0 ]; then
-	echo "/usr MOUNT FAILED!" 
+	echo "/usr MOUNT FAILED!" > /dev/msglog
 	exit $SMF_EXIT_ERR_FATAL
 fi
 
 
-misc_lofi_dev=$(/usr/sbin/lofiadm -a /.cdrom/$SOLARISMISC_ZLIB)
+misc_lofi_dev=$(/usr/sbin/lofiadm -a $SOLARISMISC_ZLIB)
 if [ $? -ne 0 -o -z "$misc_lofi_dev" ]; then
-	echo "lofiadm of /mnt/misc FAILED!"
+	echo "lofiadm of /mnt/misc FAILED!" > /dev/msglog
 	exit $SMF_EXIT_ERR_FATAL
 fi
 
 $MOUNT -F hsfs -o ro ${misc_lofi_dev} /mnt/misc
 if [ $? -ne 0 ]; then
-	echo "/mnt/misc MOUNT FAILED!"
+	echo "/mnt/misc MOUNT FAILED!" > /dev/msglog
 	exit $SMF_EXIT_ERR_FATAL
 fi
 
+# Check if mount of /.cdrom failed.
+if [ ! /.usr.tar.xz ]; then
+	$MOUNT | grep "^/.cdrom"
+	if [ $? -ne 0 ]; then
+		echo "** FATAL **: Unable to access media" > /dev/msglog
+		exit $SMF_EXIT_ERR_FATAL
+	fi
+fi
+
+
 if [ $LIVECD = 1 ]; then
 	echo "Done mounting Live image" > /dev/msglog
 elif [ $AUTOINSTALL = 1 ]; then
@@ -201,6 +228,17 @@ elif [ $TEXTINSTALL = 1 ]; then
 	echo "Done mounting text install image" > /dev/msglog
 fi
 
+# now after the lofi filesystems are active, get rid of
+# the ones in the current root filesystem.
+if [ -f /.usr.tar.xz ]; then
+	rm -f /solaris.zlib
+	rm -f /solarismisc.zlib
+	if [ -f /.cdrom/solaris.zlib ]; then
+		rm /tmp/solarismisc.zlib
+		rm /tmp/solaris.zlib
+	fi
+fi
+
 #
 # Also mount /boot now so that things like keymap.sh can access
 # boot properties through eeprom.  Readonly isn't required because
@@ -228,24 +266,6 @@ fi
 #
 libc_mount
 
-# 
-# Discover architecture and find and mount optimal libc_psr 
-#  
-ARCH=`/usr/bin/uname -m` 
-PLAT=`/usr/bin/uname -i` 
-if [ "$ARCH" = "sun4v" ]; then 
-	sun4v_libc_psr_mount 
-elif [ "$ARCH" = "sun4u" ]; then 
-	if [ -h /platform/$PLAT/lib/libc_psr.so.1 ]; then 
-		LINKSTO=`/usr/bin/ls -l /platform/$PLAT/lib/libc_psr.so.1 | 
-			/usr/bin/awk '{print $NF}'` 
-		if [ "$LINKSTO" = "../../sun4u-us3/lib/libc_psr.so.1" ]; then 
-			ARCH=sun4u-us3 
-		fi
-	fi
-	sun4u_libc_psr_mount 
-fi
-
 #
 # All SMF services are imported and sevice profiles are applied to the
 # boot archive during image construction time.  However, the link
@@ -287,12 +307,6 @@ if [ $AUTOINSTALL = 1 ]; then
 		/usr/sbin/svcadm enable network/ssh
 	fi
 elif [ $LIVECD = 1 ]; then
-	#
-	# Set up the terminal correctly for prompting
-	#
-	TERM=sun-color
-	export TERM
-
 	#
 	# if requested via GRUB menu selection:
 	#     enable ssh
@@ -334,9 +348,21 @@ elif [ $LIVECD = 1 ]; then
 
 elif [ $TEXTINSTALL = 1 ]
 then
-	# Get keyboard layout from user.
-	/usr/bin/kbd -s </dev/console >/dev/console 2>&1
-	/usr/sbin/set_lang </dev/console >/dev/console 2>&1
+	# Check if we have a self identifying keyboard type - usually only on SPARC systems.
+	KBTYP=`/usr/bin/kbd -t`
+	case $KBTYP in
+		Type*) echo "Using: ${KBTYP}." > /dev/msglog
+		;;
+		*) # Get keyboard layout from user.
+			/usr/bin/kbd -s </dev/console >/dev/console 2>&1
+		;;
+	esac
+	# check if created boot-image has additional languages,
+	# if not then we don't have to ask this question.
+	ALLLANG=`ls /usr/lib/locale | wc -w | awk '{print $1}'`
+	if [ "$ALLLANG" -ge 30 ]; then
+		/usr/sbin/set_lang </dev/console >/dev/console 2>&1
+	fi
 fi
 
 exit $SMF_EXIT_OK
diff --git a/usr/src/cmd/slim-install/user/jack/README.multiboot b/usr/src/cmd/slim-install/user/jack/README.multiboot
new file mode 100644
index 00000000..0b61240e
--- /dev/null
+++ b/usr/src/cmd/slim-install/user/jack/README.multiboot
@@ -0,0 +1,175 @@
+
+Filesystem type on dedicated ZFS root pool slice isn't zfs type:
+================================================================
+It is possible that previous installations left over old partition
+signatures or fragments, which prevent a successfull installation.
+None multiboot installations typically show the following VTOC layout:
+
+Part      Tag    Flag     First Sector          Size          Last Sector
+  0     system    wm               256       256.00MB           524543    
+  1        usr    wm            524544       476.68GB           1000198798    
+  2 unassigned    wm                 0            0                0    
+  3 unassigned    wm                 0            0                0    
+  4 unassigned    wm                 0            0                0    
+  5 unassigned    wm                 0            0                0    
+  6 unassigned    wm                 0            0                0    
+  8   reserved    wm        1000198799         8.00MB           1000215182    
+
+During implementation of multiboot setups, it has been discoverd that it
+is possible to create ZFS filesystems on a PCFS filesystem type, but later
+the installboot command fails on the rpool slice, with error message:
+
+Booting pcfs from EFI labeled disks requires the boot partition.
+
+If you should see this message, please re-check filesystem types of the
+first parition slice:
+
+# /usr/sbin/fstyp /dev/rdsk/<your disk>s0
+  it should respond with: unknown_fstyp (no_matches)
+
+Then check the partition slice on which you expect the ZFS root filesystem:
+
+# /usr/sbin/fstyp /dev/rdsk/<your disk>s1
+  it should respond with: zfs
+
+If one or both of these slices respond different, first destroy the ZFS
+rpool, which might already exist:
+# zpool list
+NAME    SIZE  ALLOC   FREE  CKPOINT  EXPANDSZ   FRAG    CAP  DEDUP    HEALTH...
+rpool   476G   540K   476G        -         -     0%     0%  1.00x    ONLINE  -
+
+# zpool destroy rpool
+
+Next step is to clean the signatures of the slice(s) using dd:
+# dd if=/dev/zero of=/dev/rdsk/<your disk>s0 bs=1M count=16
+# dd if=/dev/zero of=/dev/rdsk/<your disk>s1 bs=1M count=16
+
+Last step is to revert the partition table using the format program:
+# format
+or you use a combination of prtvtoc / fmthard:
+# prtvtoc -h /dev/rdsk/<disk>s0 | tail -1 | fmthard -s - /dev/rdsk/<disk>s0
+
+response should be:
+fmthard: New volume table of contents now in place.
+
+After all these steps are done, restart the installer by typing exit in this
+SHELL and start all over by choosing "1" in the top-level menu of the installer
+and continue by choosing your installation disk again.
+Your installation should be working from now on.
+
+=================
+Multiboot Setups:
+=================
+
+SPARC:
+======
+On SPARC systems a multiboot setup is much more simple than on x86 based systems,
+because the boot-manager is already build in. The OBP (Open Boot Prom) provides
+the possibility to boot from arbitrary disks. If you are short on disks you can
+even boot from one of the standard VTOC slices: 0-7 directly from OBP.
+Here are some examples and hints how to boot/install on SPARC systems:
+
+tbn...
+
+x86_64 EFI/UEFI/GPT:
+====================
+For EFI/UEFI or GPT systems it may be necessary to disable "Secure Boot", in
+your system BIOS, in order to be able to boot from USB/DVD media.
+
+Possible Multiboot Scenarios:
+=============================
+1. illumos + Windows OR illumos + Windows + Linux
+-------------------------------------------------
+If you plan a multiboot setup, involving also a Windows installation on a
+UEFI/GPT system, things are getting more complicated. At present this
+installer detects your Windows installation and checks it's size. If there is
+not enough space available for a illumos installation, it offers you the
+possibility to resize the disk for a new windows installation. At present it's
+not possible to shrink the existing Windows installation. Therefore only a new
+installation of Windows on predefined partition tables ensures a stable
+illumos installation. The predefined partitions for Windows, offered by this
+installer define the following standard Windows sizes:
+
+  1. for EFI as the system partition 100MB.
+  2. a Windows reserved partition 16MB.
+  3. NTFS - the size you'll choose while installing.
+Note: the 100MB system parition will be shared by all operating systems.
+
+During installation the installer asks for:
+Do you want to setup a Multiboot Environment (default=N/y?):
+If you answer "y" the following menu appears:
+
+	1 OpenIndiana + Linux
+	2 OpenIndiana + Windows
+	3 OpenIndiana + Windows + Linux
+	q  back to disk selection
+
+	Your choice: 
+
+If you choose option 2 or 3 the installer asks for the size of your
+Windows partition and creates above partition layout with the size
+you want to spent for Windows. Immediatley after that it reboots
+your system for a new Windws installation, indicated by:
+
+Rebooting for Windows Install...
+
+At the Windows installation screen make sure to select thr NTFS
+partition - usually partition 3 and press the format button
+before installling Windows, leave all other partitions untouched.
+After your new Windows installation has been done, restart this
+installer and choose the same disk as before, now you'll not be
+asked to enable a Multboot Environment. You should see the
+following messages instead:
+
+Welcome back to OpenIndiana installation, the selected Windows
+layout uses: xxxGB
+
+Next step will be to set the size for the illumos installation, and
+or the Linux installation, devide the rest of the disk space between
+them as you see fit.
+
+If you have choosen a config which includes Linux, you see the
+following mesage right at the end of illumos install:
+
+NOTES:
+illumos starts to count partitions starting with 0
+Linux starts to count partitions starting with 1
+If you decide NOT to use a Linux installation with or without Windows,
+you have to use some UEFI firmware/application to boot illumos, which
+can usually be found in your system/UEFI frimware settings.
+
+2. illumos + Linux
+------------------
+If you have choosen option 1 from above menu, you have to decide how much
+disk space you want to spent for illumos, the remainig space will be used
+for Linux. This installer will create a script for you which can be used
+to add the illumos installation into the grub configuration of your
+Linux installation, shown by the following message:
+
+You have to run: /boot/efi/EFI/OpenIndiana/add_grub,
+after the Linux installation has been done, to activate
+OpenIndiana in your grub configuration!
+
+In the Linux installer you will see one partition with the size you have
+specified for Linux. Select this partition in the Linux installer, and
+press the "-" button, now this space should appear as free-space.
+Divide this free space into at least 2 partitions - one for swap and
+one ext4 for / by pressing the "+" sign.
+Make sure you DO NOT TOUCH parition 9 as it marks the start of the
+entire disk and if modified, you'll have to start all over again.
+
+Hardware Notes:
+===============
+1.) ACER Aspire3 laptops (A315-54K):
+The disk-controller "SATA Mode" in the "Information" tab of the system BIOS
+is set to "Optane without RAID" by default. Therefore illumos will not see
+any disk drives. Switch to the next tab "Main" and press <Crtl>+S to hideout
+the "SATA Mode" menu, showing above setting, select this sub-menu and press
+<Return>, choose <AHCI> mode. Exit system BIOS saving your change, and
+re-enter BIOS to verify the "Information" tab shows AHCI mode now, before
+trying to install illumos/OpenIndiana.
+Note: this will definitively render your Windows installation unbootable!
+To fix this, you can have a look at Ubuntu's Web-pages, if you want to keep
+your Windows installation as is. They have excellent help pages to work
+around that problem. I found it much more easier to just re-install Windows
+in AHCI mode for my tests.
diff --git a/usr/src/cmd/text-install/svc/Makefile b/usr/src/cmd/text-install/svc/Makefile
index c25707f7..b6a871ac 100644
--- a/usr/src/cmd/text-install/svc/Makefile
+++ b/usr/src/cmd/text-install/svc/Makefile
@@ -34,10 +34,13 @@ install:=	TARGET= install
 PROG_KSH=	text-mode-menu.ksh
 PROG=		$(PROG_KSH:%.ksh=%)
 
+INSTALLER_KSH=	text-install.ksh
+INSTALLER=	$(INSTALLER_KSH:%.ksh=%)
+
 MSG_DOMAIN=	SUNW_INSTALL_TEXT_MENU
 POFILE=		$(MSG_DOMAIN).po
 
-ROOTPROGS=      $(PROG:%=$(ROOTUSRSBIN)/%)
+ROOTPROGS=      $(PROG:%=$(ROOTUSRSBIN)/%) $(INSTALLER:%=$(ROOTSBIN)/%)
 $(ROOTPROGS) :=	FILEMODE = 0555
 ROOTMSGS=	$(POFILE:%=$(ROOTUSRLIBMSGS)/%)
 
diff --git a/usr/src/cmd/text-install/svc/text-install.ksh b/usr/src/cmd/text-install/svc/text-install.ksh
new file mode 100755
index 00000000..60c4af50
--- /dev/null
+++ b/usr/src/cmd/text-install/svc/text-install.ksh
@@ -0,0 +1,2132 @@
+#!/bin/ksh
+#
+# plain text installer for illumos distributions,
+# not suitable for SunOS 4.x, or older.
+#
+# Copyright (c) 2025, 2026 Klaus Ziegler
+#
+# netmask validation/function by Olaf Bohlen Oct 2025
+
+trap 'rm -f /tmp/*zpool.log /tmp/ztemp.log; exit' 0 1 2 15
+
+biosboot()
+{
+    # check number of used fdisk partitions.
+    /sbin/fdisk -W -v /dev/rdsk/${disk}p0 | /usr/bin/egrep -v "^\*|^$" >/tmp/fdisk_table.$$
+    vfdisk=`cat /tmp/fdisk_table.$$ | awk 'END{print NR}'`
+    # check for Solaris2 partition.
+    illu=`awk '$1==0191{print "yes"}' /tmp/fdisk_table.$$`
+    numuse=`/usr/bin/egrep -c -v "^  0|^  191" /tmp/fdisk_table.$$`
+    if [ "$illu" != "yes" ]; then
+	if [ "$numuse" -ge 4 ]; then
+	    printf "\n\tUnable to install, no free fdisk partition available - exit."
+	    sleep 10; exit 0
+	fi
+    fi
+    if [ "$illu" != "yes" -a "$numuse" -ge 2 ]; then
+	print "\n\tDetected other operating system(s) on your disk."
+	printf "\tThe choosen disk drive: $disk is: "
+	dsksize $disk
+	print "$showon in size."
+	cyuse=`awk '$1!=0{s+=$10};END{print s}' /tmp/fdisk_table.$$`
+	printf "\tOther operating system(s) use: "
+	echo $cyuse | awk '{s=($1*512)/1024/1024/1024}END{printf("%.2fGB\n"), s}'
+	/sbin/fdisk -B /dev/rdsk/${disk}p0
+	avail=`/sbin/fdisk -W -v /dev/rdsk/${disk}p0 | awk '/^  191/{print $10}'`
+	rest=`expr $avail - $cyuse`
+	if [ "$rest" -gt "$cyuse" ]; then
+	    availmb=`echo $rest | awk '{s=($1*512)/1024/1024/1024}END{printf("%.2fGB\n"), s}'`
+	    print "\tAllocatiing the rest of $availmb for: ${distribution}"
+	    printf "\tCreating a new primary partition for: ${distribution}"
+	    sed -e "s@ 128 @ 0   @g" /tmp/fdisk_table.$$ >/tmp/fdisk_table
+	    sed -e "/^  0/d" /tmp/fdisk_table >/tmp/fdisk_table.$$
+	    stcyl=`tail -1 /tmp/fdisk_table.$$ | awk '{s=$9+$10};END {printf("%-10d"), s}'`
+	    printf "  191   128  0      0      0       0      0" >>/tmp/fdisk_table.$$
+	    print "      0       $stcyl $rest" >>/tmp/fdisk_table.$$
+	    /sbin/fdisk -F /tmp/fdisk_table.$$ /dev/rdsk/${disk}p0
+	    printf "."
+	    echo "p\np\nq\n" | /usr/sbin/format -d ${disk} >/tmp/disksz.log 2>/dev/null
+	    echo "${num}\nq\n" | /usr/sbin/format | grep cyl >/tmp/dtype.log 2>/dev/null
+	    ftyp=`nawk '{gsub("<",""); print $3}' /tmp/dtype.log`
+	    dtyp=`dmesg | grep "Disk$num" | sed \
+		-e "s@^.*uct '@@g" \
+		-e "s@ '.*@@g" \
+		-e "s@'>@@g" \
+		-e "s@ @-@g" | sort -u`
+	    dtype=`echo $ftyp | sed -e "s@Unknown-Unknown@$dtyp@g"`
+	    cyl=`awk '{print $5}' /tmp/dtype.log`
+	    head=`awk '{print $9}' /tmp/dtype.log`
+	    sect=`nawk '{gsub(">",""); print $11}' /tmp/dtype.log`
+	    printf "."
+	    s0s=`awk '/^  8|^  9/ {s=$4+$6}END{print s}' /tmp/disksz.log`
+	    s8e=`awk '/^  8/ {print $9}' /tmp/disksz.log`
+	    s9e=`awk '/^  9/ {print $9}' /tmp/disksz.log`
+	    s2l=`awk '/^  2/ {print $9}' /tmp/disksz.log`
+	    s0l=`expr $s2l - $s9e - $s8e`
+	    printf "."
+	    printf "t\n1\n${cyl}\n2\n\n${head}\n${sect}\n" >/tmp/format_script
+	    printf "\n\n\n\n\n\n\n\n\n\n\n${dtype}\np\n0\nroot\n\n" >>/tmp/format_script
+	    print "${s0s}\n${s0l}b\nl\nq\n" >>/tmp/format_script
+	    /usr/sbin/format -s -d ${disk} -f /tmp/format_script 2>/dev/null
+	    echo " done."
+	    zslice=0
+	    do_zpool
+	else
+	    /sbin/fdisk -F /tmp/fdisk_table.$$ /dev/rdsk/${disk}p0
+	    print "\tNot enough space left on disk: ${disk} for ${distribution} "
+	    sleep 10; exit 0
+	fi
+	rm -f /tmp/fdisk_table* /tmp/dtype.log /tmp/format_script /tmp/disksz.log
+    else
+	printf "\n\tSorry - mutiboot not supported without preinstalled forign os - exit."
+	    sleep 10; exit 0
+    fi
+    defpart=no
+    disk_okay=okay
+}
+
+dial()
+{
+    pid=$1
+    state=0
+    while [ -d /proc/$pid ]
+    do
+	case $state in
+	    0) echo "|\b\c"; state=1 ;;
+	    1) echo "/\b\c"; state=2 ;;
+	    2) echo "-\b\c"; state=3 ;;
+	    3) echo "\\" "\b\b\c"; state=0 ;;
+	esac
+	sleep 1
+    done
+}
+
+grub_cfg()
+{
+    gdir=/tmp/pcfs/EFI/$distribution
+    printf "menuentry '" >$gdir/grub.cfg
+    printf "$distribution " >>$gdir/grub.cfg
+    printf "Boot Manager (" >>$gdir/grub.cfg
+    printf "on /dev/" >>$gdir/grub.cfg
+    if [ `expr "$disk" : '.* *'` -gt "7" ]; then
+	dskclass=nvme0n1
+    else
+	dskclass=sd0
+    fi
+    lxefi=`expr $efis + 1`
+    printf "${dskclass}p${lxefi})' " >>$gdir/grub.cfg
+    printf "--class windows --class " >>$gdir/grub.cfg
+    printf 'os $menuentry_id_option ' >>$gdir/grub.cfg
+    print "'osprober-efi-0000-0000' {" >>$gdir/grub.cfg
+    print "\tinsmod part_gpt" >>$gdir/grub.cfg
+    printf "\tsearch --no-floppy --fs-uuid " >>$gdir/grub.cfg
+    echo '--set=root 0000-0000' >>$gdir/grub.cfg
+    printf "\tchainloader /EFI/" >>$gdir/grub.cfg
+    printf "${distribution}/" >>$gdir/grub.cfg
+    print "Boot/bootx64.efi\n}" >>$gdir/grub.cfg
+
+    print "#!/bin/sh\n#" >$gdir/add_grub
+    printf 'printf "Adding: ' >>$gdir/add_grub
+    printf "$distribution" >>$gdir/add_grub
+    print " Boot-Manager to your grub.cfg...\"" >>$gdir/add_grub
+    printf "awk '/^#$/,/30_os-prober/' " >>$gdir/add_grub
+    print '/boot/grub/grub.cfg > \' >>$gdir/add_grub
+    print "\t/tmp/grub_cfg" >>$gdir/add_grub
+    printf "cat /boot/efi/EFI/" >>$gdir/add_grub
+    printf "$distribution" >>$gdir/add_grub
+    print "/grub.cfg >>/tmp/grub_cfg" >>$gdir/add_grub
+    print 'winin=`grep -c chainloader /boot/grub/grub.cfg`' >>$gdir/add_grub
+    print 'if [ "$winin" -ge 1 ]; then' >>$gdir/add_grub
+    printf "\tawk '/Windows Boot Manager/,/END && 41_custom/' " >>$gdir/add_grub
+    print '/boot/grub/grub.cfg >> \' >>$gdir/add_grub
+    print "\t/tmp/grub_cfg\nelse" >>$gdir/add_grub
+    print '\techo "set timeout_style=menu" >> /tmp/grub_cfg' >>$gdir/add_grub
+    printf "\techo 'if [ " >>$gdir/add_grub
+    printf '"${timeout}" ' >>$gdir/add_grub
+    print "= 0 ]; then' >> /tmp/grub_cfg" >>$gdir/add_grub
+    print '\techo "  set timeout=10" >> /tmp/grub_cfg' >>$gdir/add_grub
+    print '\techo "fi" >> /tmp/grub_cfg' >>$gdir/add_grub
+    print ' \techo "### END /etc/grub.d/30_os-prober ###" >> /tmp/grub_cfg' >>$gdir/add_grub
+    printf "\tawk '/30_uefi-firmware/,/END && 41_custom/' " >>$gdir/add_grub
+    print '/boot/grub/grub.cfg >> \' >>$gdir/add_grub
+    print "\t/tmp/grub_cfg\nfi" >>$gdir/add_grub
+    print "mv /tmp/grub_cfg /boot/grub/grub.cfg" >>$gdir/add_grub
+    print "chmod 0600 /boot/grub/grub.cfg" >>$gdir/add_grub
+    print 'echo " done"' >>$gdir/add_grub
+    print "/usr/sbin/grub-install" >>$gdir/add_grub
+    chmod 0777 $gdir/add_grub
+}
+
+do_size()
+{
+    while true
+    do
+	printf "\tHow much space to allocate for $1 - ${showsz}${SZ} max: "
+	read want
+	case $want in
+	    *.*)
+		print "\tonly use even numbers please - try again."
+	    ;;
+	    [0-9]*[m,b]|[0-9]*[g,b]|[0-9]*[t,b])
+		val=`echo $want | sed -e "s@[0-9]*@@g"`
+		num=`echo $want | sed -e "s@[m,g,t]b@@g"`
+		case $val in
+		    mb) blks=`echo $num | awk '{s=($1*1024*1024)/512;print s}'`
+		    ;;
+		    gb) blks=`echo $num | awk '{s=($1*1024*1024*1024)/512;print s}'`
+		    ;;
+		    tb) blks=`echo $num | awk '{s=($1*1024*1024*1024*1024)/512;print s}'`
+		    ;;
+		esac
+		if [ "$blks" -le $2 ]; then
+		    ablk=`expr $ablk - $blks`
+		    echo "$want" >>/tmp/new_label.$$
+		    loop=done
+		    break
+		else
+		    print "\t$want too big - try again."
+		fi
+	    ;;
+	    *)
+		print "\tg(gigabytes), m(megabytes) or t(terrabytes) please - try again."
+	    ;;
+	esac
+    done
+}
+
+do_zpool()
+{
+    if [ -n "$zslice" ]; then
+	printf "\tCreating root zpool: rpool on ${disk}s${zslice}..."
+	zpool create -f rpool /dev/dsk/${disk}s${zslice}
+    else
+	printf "\tCreating EFI partition and zpool: rpool..."
+	zpool create -fB rpool /dev/dsk/${disk}
+	zslice=1
+    fi
+    pool_name=rpool
+    defpart=no
+    nozpool=yes
+    print " done."
+}
+
+dyn_static()
+{
+    print "\n\tSystem: $Hostname will be configured using Dynamic Host"
+    print "\tConfiguration Protocol, if you accept the default."
+    printf "\tDo you want to use DHCP for network configuration (default=Y/n?): "
+    if yesno; then
+	net=okay ntype=dynamic
+    else
+	print "\tDo you want to use above information to setup: $nic with"
+	printf "\tstatic IP configuration, to omit DHCP control on it (default=Y/n?): "
+	if yesno; then
+	    net=okay ntype=static nic=$nic DHCP=false
+	else
+	    net=none nic=none ntype=static DHCP=false
+	fi
+    fi
+}
+
+noyes()
+{
+    while true
+    do
+	read response
+	case "$response" in
+	    [Yy]|[Yy][Ee][Ss])
+		return 1
+	    ;;
+	    [Nn]|[Nn][Oo]|"")
+		return 0
+	    ;;
+	    *)
+		printf "\t\tPlease answer yes (y) or no (n): "
+	    ;;
+	esac
+    done
+}
+
+# function to prepare x86 disk, only used interactively.
+efiboot()
+{
+    if [ $numlen -gt 1 ]; then
+	printf "\n\tSorry - Multiboot Setup for mirrored disks is not supported."
+	sleep 5; return
+    fi
+    dsksize $disk
+    [ -z "$resv" ] && resv=no
+    olayout=yes
+    # test for unconfigured disk.
+    if [ ! -s /tmp/vtoc.$$ ]; then
+	print "The disk had no defined partition table entries!" >>$TLOG
+	olayout=no
+	/sbin/zpool create -fB rpool /dev/dsk/$disk
+	/sbin/zpool destroy rpool
+    fi
+    echo "p\np\nq\n" | /usr/sbin/format -d ${disk} >/tmp/disksz.log 2>/dev/null
+    /usr/sbin/prtvtoc -h /dev/rdsk/${disk}s2 >/tmp/vtoc.$$
+    if [ -s /tmp/vtoc.$$ ]; then
+	grep "^  [0-9]" /tmp/disksz.log | sed \
+	    -e '/unassigned/d' >/tmp/disklabel.orig
+	ronly=`head -1 /tmp/disklabel.orig | awk '{print $1}'`
+	[ "$ronly" = 8 ] && resv=no
+    fi
+    ablk=`awk '/^Total/{s=$5+$7+33};END{print s}' /tmp/disksz.log`
+    # ask for multiboot setup:
+    # 1. if reserved slice is 'no' - blank disk.
+    # 2. if reserved slice is there, but the only one.
+    # 3. if illumos ZFS is on slice 1 and is of type usr.
+    illu=`awk '$1==1 && $2==4 {print "yes"}' /tmp/vtoc.$$`
+    if [ "$resv" = "no" -o "$illu" = "yes" ]; then
+	print "\n\t\t*** Multiboot Install Instructions ***\n"
+	print "\tTo enable multiboot, disk drive: $disk needs to be"
+	print "\tpartioned, this will destroy all data. The installations for other"
+	print "\toperating systems must be done in the following order:\n"
+	print "\t1. Prepare partitions for a Windows Installation and reboot."
+	print "\t   In the Windows installer highlight partition 3 and format it."
+	print "\t   Do NOT change the layout at all, make sure that partition 3"
+	print "\t   is still highlighted before you select next."
+	print "\t2. Come back and restart this installer, then you can decide"
+	print "\t   how much space to spent for  ${distribution}/Linux."
+	print "\tNote:"
+	print "\tTo boot ${distribution} you will need a boot-manager, or an UEFI boot"
+	print "\tapplication, which can usually be found in your system BIOS.\n"
+	if [ -n "$efis" -a -n "$msr" -a -n "$ntfs" ]; then
+	    print "\tDetected a Windows installation using the complete disk, this"
+	    print "\tcan't be used to install ${distribution} operating system! Selecting"
+	    print "\tone of below options, will erase this Windows installation.\n"
+	fi
+	print "\tSelect one of the following Multiboot Setups:\n"
+	print "\t\t1 $distribution + Linux"
+	print "\t\t2 $distribution + Windows"
+	print "\t\t3 $distribution + Windows + Linux"
+	print "\t\tq back to disk selection\n"
+	printf "\t\tYour choice: "
+	printf "\nMultiboot Setup Option: " >>$TLOG
+	while true
+	do
+	    read choice
+	    case $choice in
+		1) print "$distribution + Linux has been selected" >>$TLOG
+		    needlin=yes  break 1;;
+		2) print "$distribution + Windows has been selected" >>$TLOG
+		    needwin=yes  break 1;;
+		3) print "$distribution + Windows + Linux has been selected" >>$TLOG
+		    needwin=yes needlin=yes break 1 ;;
+		q) return ;;
+		*) echo "\n\t\twrong input - try again.\n" ;;
+	    esac
+	done
+    fi
+
+    if [ "$needwin" = "yes" ]; then
+	if [ "$olayout" = "yes" ]; then
+	    grep "^  [0-9]" /tmp/disksz.log | sed \
+		-e '/unassigned/d' \
+		-e "s@0     system@0       UEFI@g" \
+		-e "s@1          -@1        MSR@g" \
+		-e "s@2          -@2       NTFS@g" >/tmp/disklabel.orig
+	fi
+	/sbin/zpool create -fB rpool /dev/dsk/$disk
+	/sbin/zpool destroy rpool
+	echo "p" >/tmp/new_label.$$
+	print "0\nsystem\nwm\n2048\n100mb" >>/tmp/new_label.$$
+	print "1\nroot\nwm\n206848\n16mb" >>/tmp/new_label.$$
+	print "2\nhome\nwm\n239616" >>/tmp/new_label.$$
+	print "\n\tNow you need to resize your Windows Installation."
+	bcnt=`expr $ablk - 237568`
+	loop=true
+	while [ "$loop" != "done" ]
+	do
+	    do_size Windows $bcnt
+	done
+	echo "l\nq\n" >>/tmp/new_label.$$
+	/usr/sbin/format -s -d ${disk} -f /tmp/new_label.$$ 2>/dev/null
+	echo "p\np\nq\n" | /usr/sbin/format -d ${disk} >/tmp/disksz.log 2>/dev/null
+	/usr/sbin/prtvtoc -h /dev/rdsk/${disk}s2 >/tmp/vtoc1.$$
+	# reset IDs to be Windows compatible.
+	sed -e "s@ 2    00@19    00@g" -e "s@ 8    00@20    00@g" /tmp/vtoc1.$$ >/tmp/vtoc.$$
+	/usr/sbin/fmthard -s /tmp/vtoc.$$ /dev/rdsk/${disk}s2 >/dev/null 2>/dev/null
+	while true
+	do
+	    echo y
+	done | /usr/sbin/mkfs -F pcfs /dev/rdsk/${disk}s0
+	[ ! -d /tmp/pcfs ] && mkdir /tmp/pcfs
+	mount -F pcfs /dev/dsk/${disk}s0 /tmp/pcfs
+	mkdir -p /tmp/pcfs/EFI/${distribution}/Boot
+	grep "^  0" /tmp/disksz.log | sed \
+	    -e "s@0     system@0       UEFI@g" >/tmp/pcfs/EFI/${distribution}/disklabel.win
+	grep "^  1" /tmp/disksz.log | sed \
+	    -e "s@1       root@1        MSR@g" >>/tmp/pcfs/EFI/${distribution}/disklabel.win
+	grep "^  2" /tmp/disksz.log | sed \
+	    -e "s@2          -@2       NTFS@g" >>/tmp/pcfs/EFI/${distribution}/disklabel.win
+	grep "^  8" /tmp/disksz.log >>/tmp/pcfs/EFI/${distribution}/disklabel.win
+	rm /tmp/vtoc* /tmp/new_label.$$ /tmp/disksz.log
+	if [ -f /tmp/disklabel.orig ]; then
+	    mv /tmp/disklabel.orig /tmp/pcfs/EFI/${distribution}
+	fi
+	mv $TLOG /tmp/pcfs/EFI/${distribution}
+	cp -p /boot/loader64.efi /tmp/pcfs/EFI/${distribution}/Boot/bootx64.efi
+	cp -p /boot/loader32.efi /tmp/pcfs/EFI/${distribution}/Boot/bootia32.efi
+	if [ "$needlin" = "yes" ]; then
+	    touch /tmp/pcfs/EFI/${distribution}/grub.cfg
+	fi
+	(cd /tmp/pcfs; chmod -R 0777 EFI/${distribution})
+	umount /tmp/pcfs
+	print "\n\tRebooting for Windows Install...\n"
+	/usr/sbin/reboot
+    fi
+
+    msr=`awk '$2==19 {print "yes"}' /tmp/vtoc.$$`
+    ntfs=`awk '$2==20 {print "yes"}' /tmp/vtoc.$$`
+    if [ "$resv" = "yes" -a -n "$efis" -a "$msr" = "yes" -a "$ntfs" = "yes" ]; then
+	# must be our prepared Windows installation.
+	zslice=3
+	ablk=`awk '/^Total/{s=$5+$7+33-2047};END{print s}' /tmp/disksz.log`
+	print "\n\tWelcome back to $distribution installation, the selected Windows"
+	printf "\tlayout uses: "
+	bcnt=`awk '{s+=$5};END{print s}' /tmp/vtoc.$$`
+	wingb=`echo $bcnt | awk '{s=($1 * 512)/1024/1024/1024; printf ("%.2fGB\n"), s}'`
+	printf "$wingb out of: "
+	printf "$showsz leaving: "
+	bcnt=`expr $ablk - $bcnt`
+	showsz=`echo $bcnt | awk '{s=($1 * 512)/1024/1024/1024; printf ("%.2fGB\n"), s}'`
+	echo $showsz
+	mkdir /tmp/pcfs
+	mount -F pcfs /dev/dsk/${disk}s${efis} /tmp/pcfs
+	# check if user requested Linux
+	if [ -f /tmp/pcfs/EFI/${distribution}/disklabel.orig ]; then
+	    #mv /tmp/pcfs/EFI/${distribution}/disklabel.orig /tmp
+	    cp /tmp/pcfs/EFI/${distribution}/disklabel.orig /tmp
+	else
+	    rm -f /tmp/disklabel.orig
+	fi
+	cp /tmp/pcfs/EFI/${distribution}/disklabel.win /tmp
+	if [ -f /tmp/pcfs/EFI/${distribution}/migration_log ]; then
+	    cp -p /tmp/pcfs/EFI/${distribution}/migration_log $TLOG
+	fi
+	if [ -f /tmp/pcfs/EFI/${distribution}/grub.cfg ]; then
+	    needlin=yes
+	    endmsg=Linux
+	else
+	    endmsg=$distribution
+	fi
+	if [ -f /tmp/pcfs/EFI/${distribution}/disklabel.orig ]; then
+	    cp -p /tmp/pcfs/EFI/${distribution}/disklabel.orig /tmp
+	fi
+	umount /tmp/pcfs
+	start=`awk '$2==20 {print $6+1}' /tmp/vtoc.$$`
+	print "p\n${zslice}\nusr\nwm\n${start}" >>/tmp/new_label.$$
+	if [ "$needlin" = "yes" ]; then
+	    loop=true
+	    while [ "$loop" != "done" ]
+	    do
+		do_size $distribution $bcnt
+	    done
+	    next=`expr $zslice + 1`
+	    start=`expr $start + $blks`
+	    print "${next}\nroot\nwm\n${start}" >>/tmp/new_label.$$
+	    rstart=`awk '$2==11 {print $4}' /tmp/vtoc.$$`
+	    bcnt=`expr $rstart - $start`
+	fi
+	printf "\tAllocating rest of: "
+	showsz=`echo $bcnt | awk '{s=($1 * 512)/1024/1024/1024; printf ("%.2fGB\n"), s}'`
+	printf "$showsz for ${endmsg}..."
+	print "${bcnt}b\nl\nq\n" >>/tmp/new_label.$$
+	cp /tmp/vtoc.$$ /tmp/vtoc.bak
+	/usr/sbin/format -s -d ${disk} -f /tmp/new_label.$$ 2>/dev/null
+	print " done"
+	if [ -f $TLOG ]; then
+	    cat $TLOG >>$LOG
+	fi
+	print "\nNew partition table for Windows installation:" >>$LOG
+	if [ -f /tmp/disklabel.orig ]; then
+	    print "\nOriginal partition table:" >>$LOG
+	    cat /tmp/disklabel.orig >>$LOG
+	    print "\n\t\t\tOld partition layout:"
+	    print "\tPart      Tag    Flag     First Sector          Size          Last Sector"
+	    awk '{print "\t" $0}' /tmp/disklabel.orig
+	fi
+	print "\nFinal partition table:" >>$LOG
+	print "\n\t\t\tNew partition layout:"
+	print "\tPart      Tag    Flag     First Sector          Size          Last Sector"
+	echo "n\np\np\nq\n" | /usr/sbin/format -d ${disk} >/tmp/disksz.log 2>/dev/null
+	grep "^  [0-9]" /tmp/disksz.log | sed \
+	    -e '/unassigned/d' \
+	    -e "s@0     system@0       UEFI@g" \
+	    -e "s@1          -@1        MSR@g" \
+	    -e "s@2          -@2       NTFS@g" \
+	    -e "s@3        usr@3        ZFS@g" \
+	    -e "s@4       root@4      Linux@g" >/tmp/final.label
+	awk '{print "\t" $0}' /tmp/final.label
+	cat /tmp/final.label >>$LOG
+	printf "\n\tOkay to use this partition layout (default=Y/n?):"
+	if yesno; then
+	    do_zpool
+	    disk_okay=okay
+	    return
+	else
+	    /usr/sbin/fmthard -s /tmp/vtoc.bak /dev/rdsk/${disk}s2 >/dev/null 2>/dev/null
+	    return
+	fi
+    fi
+
+    if [ "$needlin" = "yes" ]; then
+	efis=0
+	echo
+	if [ -f /tmp/disklabel.orig ]; then
+	    print "Original disk label before $distribution / Linux installation:" >>$LOG
+	    cat /tmp/disklabel.orig >>$LOG
+	fi
+	[ `mount | grep -c /tmp/pcfs` -eq 1 ] && umount /tmp/pcfs
+	/usr/sbin/prtvtoc -h /dev/rdsk/${disk}s2 >/tmp/vtoc.$$
+	[ ! -s /tmp/vtoc.$$ ] && /sbin/fdisk 0:0 /dev/rdsk/$disk
+	/usr/sbin/prtvtoc -h /dev/rdsk/${disk}s2 >/tmp/vtoc.$$
+	print "p\n0\nsystem\nwm\n256\n256mb" >>/tmp/new_label.$$
+	start=524544
+	ablk=`awk '/^Total/{s=$5+$7+33-2047};END{print s}' /tmp/disksz.log`
+	bcnt=`expr $ablk - $start`
+	zslice=`awk '$2==4 {print $1}' /tmp/vtoc.$$`
+	[ -z "$zslice" ] && zslice=1
+	print "${zslice}\nusr\nwm\n${start}" >>/tmp/new_label.$$
+	loop=true
+	while [ "$loop" != "done" ]
+	do
+	    do_size $distribution $bcnt
+	done
+	next=`expr $zslice + 1`
+	start=`expr $start + $blks`
+	print "${next}\nroot\nwm\n${start}" >>/tmp/new_label.$$
+	rstart=`awk '$2==11 {print $4}' /tmp/vtoc.$$`
+	bcnt=`expr $rstart - $start`
+	printf "\tAllocating rest of: "
+	showsz=`echo $bcnt | awk '{s=($1 * 512)/1024/1024/1024; printf ("%.2fGB\n"), s}'`
+	printf "$showsz for Linux..."
+	print "${bcnt}b\nl\nq\n" >>/tmp/new_label.$$
+	/usr/sbin/format -s -d ${disk} -f /tmp/new_label.$$ 2>/dev/null
+	print " done"
+	do_zpool
+	disk_okay=okay
+    fi
+}
+
+select_timezone()
+{
+    if [ $1 != GMT ]; then
+	ls /usr/share/lib/zoneinfo/$1 >/tmp/tzlist.$$
+	LINES=`/usr/bin/awk 'END {print NR}' /tmp/tzlist.$$`
+	/usr/bin/awk '{printf "%3d. %s\n", NR, $0}' /tmp/tzlist.$$ | pr -t -4
+	/usr/bin/awk '{print NR ".", $0}' /tmp/tzlist.$$ >/tmp/tzlist
+	printf "\n\tplease select (1-$LINES): "
+	read LINE
+	COUNTRY=`/usr/bin/grep "^${LINE}. " /tmp/tzlist | /usr/bin/awk '{print $2}'`
+	CHECK=`/usr/bin/grep -c "^${LINE}. " /tmp/tzlist`
+	if [ $CHECK -eq 0 ]; then
+	    print "\n\t\tInvalid country - please try again!"
+	    echo
+	else
+	    printf "\nSelected: ${1}/${COUNTRY}: "
+	    return $COUNTRY
+	    rm /tmp/tzlist*
+	    break
+	fi
+    else
+	printf "\nSelected: ${1}: "
+	CHECK=1
+    fi
+}
+
+dsksize()
+{
+    szspec=`/usr/bin/diskinfo -H | awk '$2 ~ /'"$1"'/{print $6}'`
+    case $szspec in
+	MiB) SZ=MB ;;
+	GiB) SZ=GB ;;
+	TiB) SZ=TB ;;
+    esac
+    showsz=`/usr/bin/diskinfo -H | awk '$2 ~ /'"$1"'/{print $5}'`
+    showon="${showsz}${SZ}"
+}
+
+# currently on SPARC, the zpool command dumps core, if trying
+# to create zpools on a EFI labeld disk - therefore EFI labels
+# aren't supported on SPARC atm.
+validate_disk()
+{
+    print "\n\tChecking disk(s)..."
+    case $1 in
+	[0-9],[0-9])
+	    dchk1=`echo $1 | awk -F, '{print $1}'`
+	    dchk2=`echo $1 | awk -F, '{print $2}'`
+	    disk=`/usr/bin/awk '/ '"$dchk1"'\./ {print $2}' /tmp/dsk.log`
+	    mirror=`/usr/bin/awk '/ '"$dchk2"'\./ {print $2}' /tmp/dsk.log`
+	;;
+	    [0-9]) disk=`/usr/bin/awk '/ '"$1"'\./ {print $2}' /tmp/dsk.log`
+	;;
+	    c[0-9]*t[0-9]*d[0-9]*s[0-7]|c[0-9]*d[0-9]*s[0-7])
+	    # check if the user provided a valid zpool
+	    print "\n\tChecking zpool on: $1 ..."
+	    IPORT=`/usr/sbin/zpool list | grep -c NAME`
+	    if [ "$IPORT" -eq 0 ]; then
+		printf "\tDid you forgot to import your prepared zpool ? - exit 0"
+		sleep 5; exit 0
+	    fi
+	    for pool in `zpool list | sed \
+		-e "/^NAME/d" \
+		-e "/no pools/d" | awk '{print $1}'`
+	    do
+		ISIN=`/usr/sbin/zpool status $pool | grep -c ${1}`
+		if [ "$ISIN" -eq 1 ]; then
+		    pool_name=$pool
+		    break
+		fi
+	    done
+	    if [ "$ISIN" -eq 1 -a -n "$pool_name" ]; then
+		instslice=$1
+		defpart=no
+		nozpool=yes
+		disk=`echo $1 | sed -e "s@s.*@@g"`
+	    else
+		if [ $ARCH = sparc ]; then
+		    printf "\n\tdisk-slice: $1 has not a valid ZPOOL - exit." ; sleep 5; exit 0
+		fi
+	    fi
+	;;
+	    *) print "\n\tonly two disks allowed for mirroring... - exit." ; sleep 5 ; exit 0
+	;;
+    esac
+
+    print "\nThe following disk(s) have been selected for installation:" >>$LOG
+    nawk  '/'"$disk "'/,/ / {gsub("^[ ,0-9]*. ",""); print $0}' /tmp/dsk.log >>$LOG
+    if [ -n "$mirror" ]; then
+	nawk  '/'"$mirror "'/,/ / {gsub("^[ ,0-9]*. ",""); print $0}' /tmp/dsk.log >>$LOG
+    fi
+
+    if [ "$numlen" -eq 1 ]; then
+	validate_zpool $disk
+    else
+	validate_zpool $disk
+	#validate_zpool $mirror mirror
+    fi
+
+    if [ "$ARCH" = "sparc" ]; then
+	for echk in $disk $mirror
+	do
+	    /usr/sbin/prtvtoc /dev/rdsk/${echk}s2 >/dev/null2>/dev/null
+	    if [ $? -ge 1 ]; then
+		print "\tdisk: $echk uses EFI disklabel - not supported on SPARC."
+		printf "\tDo you want to convert the EFI label into SMI label for: $echk (default=Y/n?): "
+		if yesno; then
+		    printf "\tConverting..."
+		    echo "l\n0\n\nq\n" | /usr/sbin/format -e $echk >/dev/null 2>/dev/null
+		    smiconv=true
+    		    print "\nDisk: ${echk} has been converted from EFI to SMI label." >>$LOG
+		    echo " done"
+		fi
+	    fi
+	done
+	if [ "$smiconv" = "true" ]; then
+	    print "\n\tYou just have converted EFI into SMI labels,"
+	    printf "\tplease use the format program in a SHELL to partition your disk(s)"
+	    sleep 10; exit 0
+	fi
+	zslice=0
+	disk_okay=okay
+    else
+	/usr/sbin/prtvtoc -h /dev/rdsk/${disk}s2 2>/dev/null >/tmp/vtoc.$$
+	efis=`awk '$2==12 {print $1}' /tmp/vtoc.$$`
+	msr=`awk '$2==19 {print "yes"}' /tmp/vtoc.$$`
+	ntfs=`awk '$2==20 {print "yes"}' /tmp/vtoc.$$`
+	resv=`awk '$2==11 {print "yes"}' /tmp/vtoc.$$`
+	if [ -n "$efis" -a "$msr" = "yes" -a "$ntfs" = "yes" ]; then
+	    efiboot $disk
+	else
+	    printf "\n\tDo you want to setup a Multiboot Environment (default=N/y?): "
+	    if noyes; then
+		if [ "$reinstall" = true ]; then
+		    zlice=0
+		    do_zpool
+		    disk_okay=okay
+		else
+		    if [ -n "$efifs" -a -n "$ntfs" ]; then
+			printf "\tLast chance really destroy exsiting operating system (default=Y/n?): "
+			if yesno; then
+			    do_zpool
+			    disk_okay=okay
+			else
+			    printf "\t\t\tokay - no change has been done - exit."
+			    exit 0
+			fi
+		    else
+			do_zpool
+			disk_okay=okay
+		    fi
+		fi
+	    else
+		if [ "$EFIBOOT" -eq 1 ]; then
+		    efiboot $disk
+		else
+		    biosboot $disk
+		fi
+	    fi
+	fi
+    fi
+}
+
+# Function to validate hostname
+validate_hostname() {
+    Hostname="$1"
+
+    # Length check
+    if [ ${#Hostname} -lt 1 ] || [ ${#Hostname} -gt 253 ]; then
+	echo "Invalid: Hostname must be between 1 and 253 characters."
+	return 1
+    fi
+
+    # Allowed characters check
+    echo "$Hostname" | /usr/bin/grep -qE '^[a-zA-Z0-9][a-zA-Z0-9-]*[a-zA-Z0-9]$|^[a-zA-Z0-9]$'
+    if [ $? -ne 0 ]; then
+	echo "Invalid: Hostname must contain only letters, numbers,"
+	echo "or hyphens, and cannot start or end with a hyphen."
+	return 1
+    fi
+    return 0
+}
+
+validate_netmask()
+{
+    Subnet="$1"
+    if [ `echo ${Subnet} | egrep "[0-9,a-f]{8}"` >/dev/null 2>&1 ]; then
+	# we got a hex mask like ffffff00
+	for i in 0 2 4 6; do
+	    ones=$(printf "obytes=2;%d\n" "0x${Subnet:${i}:2}" | bc | tr -d 0)
+	    mask=$(( ${mask} + ${#ones} )) # add the amount of remaining ones to bits
+	done
+    fi
+    if [ `echo ${Subnet} | egrep "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+"` >/dev/null 2>&1 ]; then
+	# we have a decimal netmask
+	echo ${Subnet} | tr '.' ' ' | read decnm[1] decnm[2] decnm[3] decnm[4]
+	for i in 1 2 3 4; do
+	    if [ ${decnm[${i}]} -gt 255 ]; then
+		echo "Invalid decimal netmask, must be x.x.x.x with x >0 and <=255"
+		sleep 5
+	    fi
+	    # convert decimal to binary and delete zeros
+	    ones=$( echo "obytes=2;${decnm[${i}]}" | bc | tr -d 0)
+	    # add the amount of remaining ones to bits
+	    mask=$(( ${mask} + ${#ones} ))
+	done
+    fi
+    if [ ${mask} -eq 0 ]; then
+	if [ ${Subnet##/} -le 32 -a ${Subnet##/} -gt 0 ]; then
+	#     we got a CIDR prefix, either /xx or xx
+	    mask=${Subnet##/}
+	else
+	    echo "Invalid CIDR, must be >1 and <=32"
+	    sleep 5
+	fi
+    fi
+}
+
+# Function to validate zpool for installation
+validate_zpool()
+{
+    # rpool name
+    if [ -z "$pool_name" ]; then
+	printf "\tChecking system for pools..."
+	return
+	# check if pool has been cretated in advance.
+	if [ `zpool list | grep -c "^NAME"` -eq "1" ]; then
+	    # check for more than one created/imported pool.
+	    if [ `zpool list | sed -e "/^NAME/d" | wc -l | awk '{print $1}'` -gt "1" ]; then
+		echo "\n\tOnly one initial zpool supported - next try"; sleep 5; exit 0
+	    fi
+	    pool_name=`zpool list | sed -e "/^NAME/d" | awk '{print $1}'`
+	else
+	    /usr/sbin/zpool import >/tmp/ztemp.log 2>/dev/null
+	    if [ -s /tmp/ztemp.log ]; then
+		# this must be a re-install.
+		sed -e "/^ config:/,+1d" /tmp/ztemp.log >/tmp/zpool.log
+		for id in `awk '/id:/ {print $2}' /tmp/zpool.log`
+		do
+		    P2L=`grep -B 1 $id /tmp/zpool.log | awk '/pool:/ {print $2}'`
+		    grep -B 1 $id /tmp/zpool.log | head -1 >/tmp/${P2L}_${id}_zpool.log
+		    nawk '/'"$id"'/,/^$/ {print $0}' /tmp/zpool.log >>/tmp/${P2L}_${id}_zpool.log
+		    ISIN=`grep -c ${1} /tmp/${P2L}_${id}_zpool.log`
+		    if [ "$ISIN" -eq 1 ]; then
+			F2S=/tmp/${P2L}_${id}_zpool.log
+			break
+		    fi
+		done
+	    else
+		print " none, pool name for install: rpool"
+		pool_name=rpool
+		if [ -z "$defpart" ]; then
+		    defpart=yes
+		fi
+	    fi
+	fi
+	if [ -n "$P2L" ]; then
+	    if [ "$2" = mirror ]; then
+		print "\n\tYour disk mirror choice: $1 is used by zpool:"
+	    else
+		print "\n\tYour disk choice: $1 is used by zpool:"
+	    fi
+	    /usr/bin/cat $F2S
+	    NLINE=`awk '{line = $NR} END {print line}' $F2S`
+	    if [ -z "$NLINE" ]; then
+		echo
+	    fi
+	    print "\tif you continue, all data on it will be destroyed !!!"
+	    printf "\tplease confirm (default=Y/n?): "
+	    if yesno; then
+		pool_name=rpool
+		reinstall=true
+		printf "\tDestroying existing zpool: $pool_name..."
+		zpool import $pool_name
+		zpool destroy $pool_name
+		echo " done."
+		[ -z "$defpart" ] && defpart=yes
+	    else
+		if [ -n "$SDSK" ]; then
+		    pool_name=$P2L defpart=yes
+		else
+		    exit 0
+		fi
+	    fi
+	else
+	    pool_name=rpool
+	fi
+	rm -f /tmp/*_zpool.log*
+    fi
+}
+
+yesno()
+{
+    while true
+    do
+	read response
+	case "$response" in
+	    [Yy]|[Yy][Ee][Ss]|"")
+		return 0
+	    ;;
+	    [Nn]|[Nn][Oo])
+		return 1
+	    ;;
+	    *)
+		printf "\t\tPlease answer yes (y) or no (n): "
+	    ;;
+	esac
+    done
+}
+
+### main ###
+# set some global variables.
+eval `uname -ap | \
+    awk '{
+	print "KARCH="$5;
+	print "ARCH="$6;
+	print "PLATFORM="$7;
+	}'`
+if [ "$ARCH" = i386 ]; then
+    EFIBOOT=`/usr/sbin/prtconf -v 2>/dev/null | /usr/bin/grep -c efi-systab`
+fi
+# for now until fully clarified how to handle NIS clients, restore
+# our modified dhcpagent defaults file.
+if [ -f /etc/default/dhcpagent.orig ]; then
+    mv -f /etc/default/dhcpagent.orig /etc/default/dhcpagent
+fi
+
+LOG=/tmp/install_log
+TLOG=/tmp/migration_log
+# OpenIndina:
+distribution=`/usr/bin/awk '/powered by illumos/ {print $1}' /etc/release`
+# OmniOS:
+[ -z "$distribution" ] && distribution=`/usr/bin/awk 'NR==1 {print $1}' /etc/release`
+# set inital netmask variables.
+mask=0
+ones=0
+
+# initialize /tmp/install.log
+[ -f $LOG ] && rm $LOG
+printf "\n\t*** Installation for $distribution starting ***\n\tat: " >$LOG
+date +%Y/%m/%d-%H:%M:%S >>$LOG
+print "\nKernel architecture: $KARCH" >>$LOG
+print "Architecture: $ARCH" >>$LOG
+print "Platform: $PLATFORM" >>$LOG
+
+# disk selection - start
+CLEANSSCREEN=0
+disk_okay=no
+while [ $disk_okay != "okay" ]
+do
+    if [ ! -f /tmp/devfsadm.run ]; then
+	printf "\n\tBuilding initial device tree - please wait..."
+	/usr/sbin/devfsadm 2>/dev/null >/dev/null
+	touch /tmp/devfsadm.run
+	echo " done."
+    fi
+    clear
+    echo
+    print "\t\t  Welcome to $distribution text-installer\n"
+    print "Thanks for choosing to install ${distribution}! This installer enables you to"
+    print "install the $distribution Operating System (OS) on x86 or SPARC systems.\n"
+    print "The installation takes place using ZFS filesystems on slice 0 of the disk you"
+    print "will be choosing below. If this is not what you want, please use <q> down below"
+    print "and <3> in the top-level menu to exit to a SHELL. Use the <format> and <zpool>"
+    print "commands to prepare the disk-slice you want to install on. For multiboot,"
+    print "slice or mirrored install options, consult the README.multiboot in /jack."
+    print "NOTE: From time to time it can happen, that you see a dump of the device tree,"
+    print "in this case, just press ^C to to restart all over from the top menu.\n"
+    printf "\tSeeking disks on system..."
+    format >/tmp/dsk.log <<EOF 2>/dev/null
+EOF
+    if [ `/usr/bin/grep -c "^AVAIL" /tmp/dsk.log` -eq 1 ]; then
+	print " done\n"
+	/usr/bin/awk '/ [0-9]*\. /' /tmp/dsk.log
+	printf "\n\tChoose disk or slice e.g. c0t0d0s0 to install on: "
+	read num
+	numlen=`expr "$num" : '.* *'`
+	case $num in
+	    [0-9]*) validate_disk $num
+	    ;;
+	    [0-9]*,[0-9]*) validate_disk $num
+	    ;;
+	    c[0-9]*d[0-9]*s[0-7]) validate_disk $num
+	    ;;
+	    c[0-9]*t[0-9]*d[0-9]*s[0-7]) validate_disk $num
+	    ;;
+	    q) echo "\nBye, bye...\n"; sleep 1; exit 0
+	    ;;
+	    *) echo "\n\tNo such disk/slice: $num - next try"; sleep 5
+	esac
+    else
+	print " No disks found!"
+	printf "\n\tPlease check disk configuration - and come back..."
+	sleep 5
+	exit 0
+    fi
+done
+rm /tmp/dsk.log
+dlenght=`expr "$disk" : '.* *'`
+# disk selection - end
+
+rm -f /tmp/zpool.log
+[ -f /tmp/ztemp.log ] && rm /tmp/ztemp.log
+plenght=`expr "$pool_name" : '.* *'`
+[ -z "$instslice" ] && instslice="${disk}s${zslice}"
+if [ -n "$mirror" ]; then
+    mirrslice=`echo $instslice | sed -e "s@$disk@$mirror@g"`
+    mlenght=`expr "$mirrslice" : '.* *'`
+fi
+slenght=`expr "$instslice" : '.* *'`
+
+# checking for DHCP, created by svc:/network/physical:nwam
+if [ -f /etc/resolv.conf ]; then
+    # try to find out which nic was used for DHCP.
+    nic=`/sbin/ipadm show-addr | /usr/bin/awk -F/ '/dhcp/ && /ok/ {print $1}'`
+    if [ -n "$nic" ]; then
+	numnic=`echo $nic | wc -w | awk '{print $1}'`
+	if [ "$numnic" -eq "1" ]; then
+	    DHCP=true
+	    print "\n\tNetwork configuration aquired by dhcp:" >>$LOG
+	    [ -f /tmp/vars.sh ] && rm -f /tmp/vars.sh
+	    for var in Subnet Timeserv Router DNSserv Hostname DNSdmain Yiaddr \
+			Rootpath Broadcst NISdmain NISservs NTPservs Vendor
+	    do
+		dget=`/sbin/dhcpinfo $var`
+		if [ -n "$dget" ]; then
+		    pastem=`echo $dget | wc -w | awk '{print $1}'`
+		    if [ "$pastem" -gt 1 ]; then
+			echo $dget >/tmp/merge
+			dget=`cat /tmp/merge`
+			set $var="$dget"
+			rm -f /tmp/merge
+		    fi
+		    echo "$var=\"$dget\"" >>/tmp/vars.sh
+		fi
+	    done
+	    . /tmp/vars.sh
+	    rm -f /tmp/vars.sh
+	    [ -n "$Subnet" ] && validate_netmask $Subnet
+	    # get IPv6 address probably for static use later.
+	    IPv6ip=`ipadm show-addr | \
+		/usr/bin/nawk '/'"$nic"'/ && $2 ~ /addrconf/ {sub("%.*",""); print $4}'`
+	else
+	    print "\tIt seems there is more than one network interface under DHCP control,"
+	    printf "\tplease use just one DHCP network interface for installation! exit. "
+	    /bin/sleep 20; exit 0
+	fi
+    fi
+else
+    DHCP=false
+    nic=none
+fi
+
+if [ -n "$NISdmain" -a -n "$Hostname" -a "$nic" != none ]; then
+    print "\n\tNIS domain: $NISdmain was found in DHCP."
+    print "\tHow do you want: $Hostname to join the domain?\n"
+    while true
+    do
+	print "\t\t0 - Do not join at all."
+	print "\t\t1 - Join for users and groups only."
+	print "\t\t2 - Full join using all NIS services.\n"
+	printf "\tYour choice: "
+	read join
+	case $join in
+	    1) NIS=ug ; break ;;
+	    2) NIS=full ; break ;;
+	    0|*) unset NISdmain NISservs; DNSonly=true ; break ;;
+	esac
+    done
+    if [ -n "$NIS" ]; then
+	printf "\n\tSetup NIS client $Hostname in $NISdmain"
+	/usr/bin/uname -S $Hostname
+	echo "$NISdmain" >/etc/defaultdomain
+	/usr/bin/domainname $NISdmain
+	if [ "$join" -eq 1 ]; then
+	    sed -e "s@^passwd:.*@passwd:     files nis@g" \
+		-e "s@^group:.*@group:      files nis@g" \
+		-e "s@^automount:.*@automount:  files nis@g" \
+		/etc/nsswitch.dns > /tmp/nsswitch.conf
+	fi
+	printf "."
+	/usr/sbin/ypinit -c "$NISservs" 2>/dev/null
+	printf "."
+	sleep 1
+	/usr/sbin/svcadm enable network/nis/client:default
+	sleep 2
+	# fix ypmatch hostname resolution.
+	rm /var/yp/binding/${NISdmain}/ypservers
+	for nserv in $NISservs
+	do
+	    /usr/bin/ypmatch $nserv hosts.byaddr >> /etc/hosts
+	    grep "^${nserv}" /etc/hosts | \
+	    awk '{print $2}' >> /var/yp/binding/${NISdmain}/ypservers
+	    csrv=`grep "^${nserv}" /etc/hosts | awk '{print $2}'`
+	    newserv="$csrv $newserv"
+	    printf "."
+	    /usr/bin/ypmatch $nserv hosts.byaddr >> /tmp/hosts.add
+	done
+	/usr/sbin/svcadm restart network/nis/client:default >/dev/null 2>&1
+	sleep 1
+	NISservs=`echo $newserv | sed -e "s@ \\$@@g"`
+	TNUM=`ypcat timezone.byname | awk 'END{print NR}'`
+	[ -n "$TNUM" ] && TZ=`ypcat timezone.byname | awk '{print $1}'`
+	printf "."
+	echo " done."
+	nfs4dom=`echo $NISdmain | cut -d\. -f2-`
+	printf "\tSetting NFSv4 Domain to: $nfs4dom"
+	print "\nNFSv4 Domain, derived from NISdomain, has been set to: $nfs4dom" >> $LOG
+	if [ -n "$Router" ]; then
+	    router=`/usr/bin/ypmatch $Router hosts.byaddr | awk '{print $2}'`
+	fi
+	echo " done."
+	ntype=static DHCP=false
+    fi
+else
+    DNSonly=true
+fi
+
+if [ "$nic" != none -a -z "$NIS" ]; then
+    if [ -z "$Hostname" ]; then
+	while true
+	do
+	    printf "\tHostname: "
+	    read Hostname
+	    if validate_hostname "$Hostname"; then
+		/usr/bin/hostname "$Hostname"
+		break
+	    else
+		echo "Hostname not set due to validation failure."
+	    fi
+	done
+    fi
+    print "\n\tThe following network configuration has been detected on: ${nic}\n"
+    print "\t  Hostname: $Hostname"
+    print "\t    Router: $Router"
+    print "\tIP-Address: $Yiaddr"
+    print "\tSubnetmask: ${Subnet}"
+    printf "\tDNS domain: "
+    /usr/bin/awk '{print "\t" $0}' /etc/resolv.conf | sed -e "s@^.*search @@g" -e 1d
+    dyn_static
+fi
+
+if [ "$nic" = none ]; then
+    net=none
+    # cleanup from a previous run.
+    [ -f /etc/resolv.conf ] && rm -f /etc/resolv.conf
+    echo "\n\tWhich network interface do want to use ?\n"
+    while [ $net != "okay" ]
+    do
+	tnics=`/sbin/dladm show-phys | /usr/bin/awk '/Ethernet/ {printf $1 "|"}'`
+	/sbin/dladm show-phys | /usr/bin/awk '/Ethernet/ {print "\t\t\t\t\t    " $1}'
+	printf "\n\t\t\t       Your choice: "
+	read nic
+	case $nic in
+	    $tnics) net=okay
+	    ;;
+	    *) echo "\n\t\t\tInvalid network-interface - please try again!\n"
+	    ;;
+	esac
+    done
+    DHCP=false
+    printf "\t\t\t\t  Hostname: "
+    read Hostname
+    if validate_hostname "$Hostname"; then
+	/usr/bin/hostname "$Hostname"
+    else
+	echo "Hostname not set due to validation failure."
+    fi
+    printf "\t\t\t\tIP-Address: "
+    read Yiaddr
+    while true
+    do
+	printf "\tEnter netmask decimal, hex or CIDR: "
+	read Subnet
+	validate_netmask $Subnet
+	if [ $mask -ne 0 ]; then
+	    break
+	fi
+    done
+    printf "\t\t\t\t    Router: "
+    read Router
+    printf "\t\t\t\tDNS Domain: "
+    read DNSdmain
+    if [ `echo "$DNSdmain" | grep -c "\."` -ge "1" ]; then
+	echo "domain  ${DNSdmain}" >/etc/resolv.conf
+	echo "search $DNSdmain" >>/etc/resolv.conf
+    else
+	unset DNSdmain
+    fi
+    printf "DNS server IPs max. 3, seperated by spaces: "
+    read DNSserv
+    if [ `echo "$DNSserv" | grep -c "\."` -ge "1" ]; then
+	for srv in $DNSserv
+	do
+	    echo "nameserver  $srv" >> /etc/resolv.conf
+	done
+    else
+	unset DNSserv
+    fi
+    if [ -z "$DNSdmain" ] && [ -z "$DNSserv" ]; then
+	print "\n\t\tDisable Domain Name Services no information given !\n"
+    fi
+    ntype=static
+    DHCP=false
+    echo
+fi
+
+# set lenght of network interface variable.
+nlenght=`expr "$nic" : '.* *'`
+
+while true
+do
+    printf "\tDo you want to convert the root account to be a role (default=N/y?): "
+    if noyes; then
+	DO_RBAC=no; break
+    else
+	DO_RBAC=yes; break
+    fi
+done
+
+while true
+do
+    printf "\tDo you want to enable legacy network services (default=N/y?): "
+    if noyes; then
+	RLOGIN=no; break
+    else
+	RLOGIN=yes; break
+    fi
+done
+
+# and NFSv4 stuff
+nfs4=unknown
+if [ -z "$nfs4dom" ]; then
+    printf "\tNFSv4 Domain Name  <RETURN> for none: "
+    while [ $nfs4 != "okay" -o $nfs4 != "none" ]
+    do
+        read nfs4dom
+        case $nfs4dom in
+	    [a-z,A-Z,0-9,.]*) print "\nNFSv4 Domain Name set to: $nfs4dom" >> $LOG
+		nfs4=okay ; break
+	    ;;
+	    *) nfs4=none ; print "\nNo NFSv4 Domain Name has been set" >> $LOG
+		nfs4=none ; break
+	    ;;
+	esac
+    done
+fi
+
+# timezone/date handling.
+if [ -z "$TZ" ]; then
+    print "\n\tSelect the region that contains your time zone.\n"
+    print "\tRegions"
+    print "\t______________________________________________\n"
+    while true
+    do
+	echo "UTC/GMT" >/tmp/myregion
+	cut -d'	' -f2- /usr/share/lib/zoneinfo/tab/continent.tab | \
+		/usr/bin/sed "/^#/d" >> /tmp/myregion
+	/usr/bin/awk '{printf("\t%2d. ", NR); print $0}' /tmp/myregion
+	rm /tmp/myregion
+	printf "\n\tplease select: "
+	read region
+	case $region in
+	    1) ZDIR=GMT; break ;;
+	    2) ZDIR=Africa; break ;;
+	    3) ZDIR=America; break ;;
+	    4) ZDIR=Antarctica; break ;;
+	    5) ZDIR=Arctic; break ;;
+	    6) ZDIR=Asia; break ;;
+	    7) ZDIR=Atlantic; break ;;
+	    8) ZDIR=Australia; break ;;
+	    9) ZDIR=Europe; break ;;
+	    10) ZDIR=Indian; break ;;
+	    11) ZDIR=Pacific; break ;;
+	    *) echo "\n\t\tInvalid Region: $region - please try again!\n" ;;
+	esac
+    done
+
+    if [ "$ZDIR" != "GMT" ]; then
+	print "\n\tSelect the location that contains your time zone.\n"
+	print "\tLocations"
+	print "\t______________________________________________\n"
+	CHECK=0
+	while [ $CHECK -ne 1 ]; do
+	    select_timezone $ZDIR
+	done
+    fi
+
+    if [ "$ZDIR" = "GMT" ]; then
+	TZ=GMT
+    else
+	TZ="${ZDIR}/${COUNTRY}"
+    fi
+fi
+export TZ
+
+if [ -n "$Timeserv" -o -n "$NTPservs" ]; then
+    printf "\n\tSyncronizing time using "
+    if [ -z "$NTPservs" ]; then
+	timeserv=`echo $Timeserv | awk '{print $1}'`
+	if [ -n "$NISdmain" ]; then
+	    timeserv=`/usr/bin/ypmatch $timeserv hosts.byaddr | awk '{print $2}'`
+	fi
+	cmd="/usr/bin/rdate"
+	STYPE="RFC 868"
+    else
+	timeserv=`echo $NTPservs | awk '{print $1}'`
+	if [ -n "$NISdmain" ]; then
+	    timeserv=`/usr/bin/ypmatch $timeserv hosts.byaddr | awk '{print $2}'`
+	cmd="/usr/sbin/ntpdate"
+	STYPE="NTP"
+	fi
+    fi
+    printf "${STYPE}-server: ${timeserv}..."
+    $cmd $timeserv >/dev/null 2>/dev/null
+    printf "System Time has been set by ${STYPE}-server: $timeserv to: " >> $LOG
+    /usr/bin/date >> $LOG
+    echo " done."
+else
+    date '+%m/%d/%y %c%H:%M:%S'
+    printf "\n\t\tcorrect (default=Y/n?):"
+    if ! yesno; then
+	printf "\tSpecify new date/time - format: Month/Day/Hour/Minute: "
+	while true
+	do
+	    read ntime
+	    if [ `expr "$ntime" : '.* *'` -ne "8" ]; then
+		printf "\n\twrong format single digits have to prefixed with '0' - try again!\n"
+		printf "\n\tDate/Time: "
+	    else
+		date $ntime >/dev/null
+		break
+	    fi
+	done
+    fi
+fi
+
+LAYOUT=US-English
+TYPE=`/usr/bin/kbd -l | /usr/bin/awk -F'[= ]' '{if ($1 == "layout") print $2}'`
+if [ -n $TYPE ]; then
+    LAYOUT=`/usr/bin/awk -v ntyp=$TYPE -F= '{if ($2 == ntyp) print $1}' /usr/share/lib/keytables/type_6/kbd_layouts`
+fi
+
+# try to find default router.
+if [ -z $Router ]; then
+    Router=`netstat -rn | /usr/bin/awk '/default/ {print $2}' | sort -u`
+fi
+
+# to be able to use the passwd command we first have to remove /etc/passwd
+# and /etc/group then copy them over from /mnt/misc/etc
+rm /etc/passwd /etc/group
+cp -p /mnt/misc/etc/passwd /etc/passwd
+cp -p /mnt/misc/etc/group /etc/group
+# get the old timestamp of /etc/shadow to at least ensure that passwd has been used,
+# however since root is using passwd command we can't realy tell if a passwd has been
+# set, because passwd also accepts just return :-( for sure this needs improvement.
+STAMP=`/usr/bin/awk -F: '/^root/ {print $3}' /mnt/misc/etc/shadow`
+print "\n\tSet System root password and define a user account for yourself.\n"
+print "\tSystem Root Password:\n"
+while true
+do
+    /usr/bin/passwd
+    SETPW=`/usr/bin/awk -F: '/^root/ {print $3}' /etc/shadow`
+    if [ $SETPW -gt $STAMP ]; then
+	RLINE=`/usr/bin/awk '/^root/' /etc/shadow`
+	break
+    fi
+done
+
+# 1000 is the default for UID/GID since ages.
+uid=1000
+gid=1000
+print "\n\tCreate a local user account."
+printf "\tYour real name:\t"
+read rname
+while true
+do
+    printf "\t      Username:\t"
+    read lname
+    ulenght=`expr "$lname" : '.* *'`
+    printf "    UID (default=${uid}): "
+    read uid
+    case $uid in
+	[0-9]*)
+	    if [ `expr "$uid" : '.* *'` -lt "5" ]; then
+		print "\n\twrong UID range given - must be at least 5 digits.\n"
+	    else
+		break
+	    fi
+	;;
+	    [a-z,A-Z]*) print "\n\twrong UID format given - can only contian digits.\n"
+	;;
+	*) uid=1000
+	    break
+	;;
+    esac
+done
+
+while true
+do
+    printf "    GID (default=${gid}): "
+    read gid
+    case $gid in
+	[0-9]*)
+	    if [ `expr "$gid" : '.* *'` -lt "4" ]; then
+		print "\n\twrong GID range given - must be at least 4 digits.\n"
+	    else
+		break
+	    fi
+	;;
+	[a-z,A-Z]*) print "\n\twrong UID format given - can only contian digits.\n"
+	;;
+	*) gid=1000
+	    break
+	;;
+    esac
+done
+echo "users::${gid}:" >> /etc/group
+
+print "\n\tWhich SHELL do you want for account: $lname ?\n"
+while true
+do
+    print "\t\t1. /usr/bin/ksh"
+    print "\t\t2. /usr/bin/csh"
+    print "\t\t3. /usr/bin/tcsh"
+    print "\t\t4. /usr/bin/bash\n"
+    printf "\tYour choice: 1,2,3 or 4 : "
+    read resp
+    case $resp in
+	1) SH=/usr/bin/ksh ; break ;;
+	2) SH=/usr/bin/csh ; break ;;
+	3) SH=/usr/bin/tcsh ; break ;;
+	""|4) SH=/usr/bin/bash ; break ;;
+	*) printf "\n\twrong SHELL choosen - try again!"; sleep 5; print "\n" ;;
+    esac
+done
+
+printf "\n${lname}'s "
+echo "${lname}:x:${uid}:${gid}:${rname}:/tmp/${lname}:${SH}" >>/etc/passwd
+echo "${lname}::6445::::::" >>/etc/shadow
+/usr/bin/passwd -r files $lname
+UHASH=`/usr/bin/awk -F: '/'"$lname"'/ {print $2}' /etc/shadow`
+UHOME=/export/home
+if [ -n "$NIS" ]; then
+    aihome=`ypmatch -k $lname auto.home | awk -F: '{print $1}'`
+    if [ "$lname" = "$aihome" ]; then
+	printf "\n\tHOME for: $lname on NFS by default (default=n/Y?): "
+	if yesno; then
+	    UHOME=/home
+	fi
+    fi
+fi
+
+# check if we have at least one nic up and running.
+if [ `/sbin/dladm show-phys | grep -c up` -ge "1" ]; then
+    while true
+    do
+	print "\n\tChoose your final installation type:\n"
+	print "\t1. Server		2. SunRay - includes Mate Desktop"
+	print "\t3. Developer		4. Mate Desktop System"
+	print "\t5. Devolper + Mate 	6. SunRay + Developer"
+	print "\t7. Server + Developer + Mate Desktop System"
+	print "\t8. Server + Developer	9. All Combinations\n"
+	print "\tq. don't install additional software right now\n"
+	printf "\tPlease make your choice (1,2,3,4,5,6,7,8,9 or q): "
+	read choice
+	case $choice in
+	    1) addsw=server_install
+		dev=no
+		UPD="Server System"
+		break
+	    ;;
+	    2) addsw="mate_install consolidation/sunray/sunray-essential"
+		dev=no
+		UPD="SunRay Server"
+		break
+	    ;;
+	    3) addsw="metapackages/build-essential"
+		dev=yes
+		UPD="Developer System"
+		break
+	    ;;
+	    4) addsw=mate_install
+		dev=no
+		UPD="Mate Desktop System"
+		break
+	    ;;
+	    5) addsw="metapackages/build-essential mate_install"
+		dev=yes
+		UPD="Mate Desktop System and Developer Support"
+		break
+	    ;;
+	    6) addsw="consolidation/sunray/sunray-essential mate_install metapackages/build-essential"
+		dev=yes
+		UPD="SunRay Server + Developer System"
+		break
+	    ;;
+	    7) addsw="server_install metapackages/build-essential mate_install"
+		dev=yes
+		UPD="Server, Developer and Mate Desktop System"
+		break
+	    ;;
+	    8) addsw="server_install metapackages/build-essential"
+		dev=yes
+		UPD="Server + Developer Support"
+		break
+	    ;;
+	    9) addsw="server_install consolidation/sunray/sunray-essential metapackages/build-essential mate_install"
+		dev=yes
+		UPD="Server, SunRay Server, Developer and Mate Desktop System"
+		break
+	    ;;
+	    q) break
+	    ;;
+	    *) echo "\n\t\twrong input - try again.\n"
+	    ;;
+    esac
+  done
+fi
+
+print "\n\tPlease review the settings below before installing. If not okay, just"
+print "\tpress ^C to start all over from the previous menu, using option <1>\n"
+print "           Hostname: $Hostname"
+print "      RBAC for root: $DO_RBAC"
+print "  Network Interface: $nic configuration type: $ntype"
+if [ -n "$router" ]; then
+    print "     Default Router: $router"
+elif [ -n "$Router" ]; then
+    print "     Default Router: $Router"
+fi
+if [ "$STYPE" = NTP ]; then
+    print "      NTP server(s): $timeserv"
+elif [ -n "$NTPservs" ]; then
+    print "      NTP server(s): $NTPservs"
+fi
+print "   User Account for: $rname"
+print "         Login Name: $lname - UID=$uid GID=${gid}(users)"
+print "           Keyboard: $LAYOUT"
+printf "  Current Date/Tine: "
+date
+print "           TIMEZONE: $TZ"
+if [ -n "$nfs4dom" ]; then
+    print "  NFSv4 Domain Name: $nfs4dom"
+fi
+if [ -n $NISdmain ]; then
+    print "\t NIS Domain: $NISdmain"
+    print "      NIS server(s): $NISservs"
+fi
+if [ -f /etc/resolv.conf ]; then
+    printf "\t DNS Domain: "
+    /usr/bin/awk '/domain/ {print $2}' /etc/resolv.conf
+    printf "      DNS server(s): "
+    for srv in `/usr/bin/awk '/nameserver/ {print $2}' /etc/resolv.conf`
+    do
+	printf "$srv "
+    done
+    echo
+fi
+if [ -n "$mirror" ]; then
+    print " Disk configuration: mirrored disks on: ${disk} & ${mirror}"
+else
+    print " Disk configuration: single disk on: ${disk}"
+fi
+
+if [ -n "$addsw" ]; then
+  print "  Installation Type: $UPD"
+fi 
+
+printf "\n\tSettings okay? just hit <RETURN> to start the installation: "
+read go
+
+# get size of slice 2 and relabel slice 0 if default partitioning has been used.
+if [ $defpart = yes ]; then
+    # constuct a label script
+    if [ -n "$mirror" ]; then
+	len=`expr $mlenght + $dlenght`
+	printf "\nLabeling disks: ${disk}/${mirror}"
+	dneed=`expr 52 - $len`
+    else
+	printf "\nLabeling disk: ${disk}"
+	dneed=`expr 52 - $dlenght`
+    fi
+    BLKS=`/usr/sbin/prtvtoc /dev/rdsk/$instslice | /usr/bin/awk '$1 ~ /2/ {print $5}'`
+    echo "p\n0\nroot\nwm" > /tmp/label_script
+    echo "0" >>/tmp/label_script
+    echo "${BLKS}b" >>/tmp/label_script
+    echo "1\nunassigned\nwm\n0\n0" >>/tmp/label_script
+    echo "3\nunassigned\nwm\n0\n0" >>/tmp/label_script
+    echo "4\nunassigned\nwm\n0\n0" >>/tmp/label_script
+    echo "5\nunassigned\nwm\n0\n0" >>/tmp/label_script
+    echo "6\nunassigned\nwm\n0\n0" >>/tmp/label_script
+    echo "7\nunassigned\nwm\n0\n0" >>/tmp/label_script
+    echo "q\nl" >>/tmp/label_script
+    format -s -d ${disk} -f /tmp/label_script
+    rm /tmp/label_script
+    if [ -n "$mirror" ]; then
+	/usr/sbin/prtvtoc -h /dev/rdsk/${disk}s2 | fmthard -s - /dev/rdsk/${mirror}s2 1>/dev/null
+    fi
+    while [ "$dneed" -ne "0" ]; do printf "."; dneed=`expr ${dneed} - 1`; done
+    echo " done."
+else
+    echo
+fi
+
+ALTROOT=/a
+/usr/bin/mkdir -p ${ALTROOT}
+len=`expr $plenght + $slenght`
+if [ -z "$nozpool" ]; then
+    if [ -n "$mirror" ]; then
+	len=`expr $len + $mlenght`
+	printf "Creating: ${pool_name} on: ${instslice}/${mirrslice}"
+	/usr/sbin/zpool labelclear -f ${instslice} 2>/dev/null
+	/usr/sbin/zpool labelclear -f ${mirrslice} 2>/dev/null
+	/usr/sbin/zpool create -f -o failmode=continue ${pool_name} mirror ${instslice} ${mirrslice}
+	dneed=`expr 51 - ${len}`
+    else
+	dneed=`expr 47 - ${len}`
+	printf "Creating: ${pool_name} on disk: ${instslice}"
+	/usr/sbin/zpool labelclear -f ${instslice} 2>/dev/null
+	/usr/sbin/zpool create -f -o failmode=continue ${pool_name} ${instslice}
+    fi
+    while [ "$dneed" -ne "0" ]; do printf "."; dneed=`expr ${dneed} - 1`; done
+    print " done."
+fi
+
+printf "Creating needed ZFS filesystems on zpool: ${pool_name}"
+/usr/sbin/zfs create -o mountpoint=legacy ${pool_name}/ROOT
+/usr/sbin/zfs create -o mountpoint=${ALTROOT} ${pool_name}/ROOT/openindiana
+/usr/sbin/zfs create -o mountpoint=${ALTROOT}/export ${pool_name}/export
+printf "."
+/usr/sbin/zfs create -o mountpoint=${ALTROOT}/export/home ${pool_name}/export/home
+# calculate size of dump/swap volumes.
+MEM=`/usr/sbin/prtconf | awk '/^Memory/ {print $3}'`
+if [ "$MEM" -lt "2050" ]; then
+    VSZ=2048
+elif [ "$MEM" -lt "4100" ]; then
+    VSZ=4096
+elif [ "$MEM" -lt "8200" ]; then
+    VSZ=8192
+else
+    VSZ=16384
+fi
+printf "."
+/usr/sbin/zfs create -V ${VSZ}m ${pool_name}/dump
+printf "."
+/usr/sbin/zfs create -V ${VSZ}m -b 8k ${pool_name}/swap
+printf "."
+/usr/sbin/zfs set org.opensolaris.libbe:uuid=`/usr/bin/uuidgen` ${pool_name}/ROOT/openindiana
+printf "."
+/usr/sbin/zfs create -o mountpoint=${ALTROOT}/var ${pool_name}/ROOT/openindiana/var
+printf "."
+/usr/sbin/zpool set bootfs="${pool_name}/ROOT/openindiana" ${pool_name}
+dneed=`expr 19 - ${plenght}`
+while [ "$dneed" -ne "0" ]; do printf "."; dneed=`expr ${dneed} - 1`; done
+echo " done."
+
+# transfer the OS now.
+printf "Populating the /etc directory.................."
+START=`truss -t time date 2>&1 1>/dev/null | /usr/bin/sed -n "1s/.*= //p"`
+cd /mnt/misc
+/usr/bin/find etc -depth -print | cpio -pdmu ${ALTROOT} 2>/dev/null
+rm /etc/svc/repository.db
+cp /lib/svc/seed/global.db ${ALTROOT}/etc/svc/repository.db
+(cd /etc/svc; ln -s ${ALTROOT}/etc/svc/repository.db repository.db)
+echo $Hostname > ${ALTROOT}/etc/nodename
+
+# set TIMEZONE.
+/usr/bin/sed -i s:PST8PDT:$TZ: ${ALTROOT}/etc/default/init
+
+# fix /etc/system
+/usr/bin/sed -e "/^set zfs/d" ${ALTROOT}/etc/system >/tmp/fix_etc_system
+/usr/bin/mv /tmp/fix_etc_system ${ALTROOT}/etc/system
+/usr/bin/chgrp sys ${ALTROOT}/etc/system
+
+# add swap space
+echo "/dev/zvol/dsk/${pool_name}/swap\t-\t-\tswap\t-\tno\t-" >>${ALTROOT}/etc/vfstab
+
+END=`truss -t time date 2>&1 1>/dev/null | /usr/bin/sed -n "1s/.*= //p"`
+SEC=`expr $END - $START`
+while [ `expr "$SEC" : '.* *'` -ne "3" ]
+do
+    SEC=" "$SEC
+done
+print " done: ${SEC} seconds needed."
+
+printf "Populating the root filesystem.........."
+START=`truss -t time date 2>&1 1>/dev/null | /usr/bin/sed -n "1s/.*= //p"`
+cd /
+for i in boot kernel lib platform root sbin usr
+do
+    /usr/bin/find $i -print -depth | cpio -pdm ${ALTROOT} 2>/dev/null
+    printf "."
+done
+END=`truss -t time date 2>&1 1>/dev/null | /usr/bin/sed -n "1s/.*= //p"`
+SEC=`expr $END - $START`
+while [ `expr "$SEC" : '.* *'` -ne "3" ]
+do
+    SEC=" "$SEC
+done
+print " done: ${SEC} seconds needed."
+
+printf "Populating the /var filesystem................."
+START=`truss -t time date 2>&1 1>/dev/null | /usr/bin/sed -n "1s/.*= //p"`
+cd /mnt/misc/var
+/usr/bin/find . -depth -print | cpio -pdm ${ALTROOT}/var 2>/dev/null
+# needed if run a second time, for debugging.
+[ -f /var/pkg/lock ] && /bin/rm /var/pkg/lock
+[ -f /var/pkg/modified ] && /bin/rm /var/pkg/modified
+END=`truss -t time date 2>&1 1>/dev/null | /usr/bin/sed -n "1s/.*= //p"`
+SEC=`expr $END - $START`
+while [ `expr "$SEC" : '.* *'` -ne "3" ]
+do
+    SEC=" "$SEC
+done
+print " done: ${SEC} seconds needed."
+
+if [ -f /.usr.tar.xz ]; then
+    printf "Populating the /usr directory..................."
+    START=`truss -t time date 2>&1 1>/dev/null | /usr/bin/sed -n "1s/.*= //p"`
+    cd /
+    xzcat .usr.tar.xz | ( cd ${ALTROOT}/usr; tar xpf - )
+    END=`truss -t time date 2>&1 1>/dev/null | /usr/bin/sed -n "1s/.*= //p"`
+    SEC=`expr $END - $START`
+    while [ `expr "$SEC" : '.* *'` -ne "3" ]
+    do
+	SEC=" "$SEC
+    done
+    echo "done: ${SEC} seconds needed."
+fi
+
+printf "Adding extra directories."
+cd ${ALTROOT}
+/usr/bin/ln -s ./usr/bin .
+printf "."
+/usr/bin/mkdir -m 1777 tmp
+printf "."
+/usr/bin/mkdir -p system/contract system/object system/boot proc mnt dev devices/pseudo
+printf "."
+/usr/bin/mkdir -p dev/fd dev/rmt dev/swap dev/dsk dev/rdsk dev/net dev/ipnet
+printf "."
+/usr/bin/mkdir -p dev/sad dev/pts dev/term dev/vt dev/zcons
+printf "."
+/usr/bin/chgrp -R sys dev devices mnt
+printf "."
+/usr/bin/chmod 0555 system system/* proc
+printf "."
+cd dev
+/usr/bin/ln -s ./fd/2 stderr
+/usr/bin/ln -s ./fd/1 stdout
+printf "."
+/usr/bin/ln -s ./fd/0 stdin
+printf "."
+/usr/bin/ln -s ../devices/pseudo/dld@0:ctl dld
+printf "."
+cd /
+printf "............"
+echo " done"
+
+printf "Setting default keyboard-layout................"
+echo '#!/usr/bin/ksh\n' >${ALTROOT}/etc/sysding.conf
+echo "setup_keyboard $LAYOUT" >${ALTROOT}/etc/sysding.conf
+echo " done"
+
+SVCCFG_REPOSITORY=${ALTROOT}/etc/svc/repository.db
+export SVCCFG_REPOSITORY
+if [ $DHCP = true ]; then
+    printf "Configure $nic for DHCP use"
+    dneed=`expr 22 - $nlenght`
+    if [ -n "$Router" ]; then
+	echo "setup_route default $Router" >>${ALTROOT}/etc/sysding.conf
+    fi
+    printf "."
+    /usr/sbin/svccfg -s network/physical:default setprop general/enabled=false
+    printf "."
+    /usr/sbin/svccfg -s network/physical:nwam setprop general/enabled=true
+    while [ "$dneed" -ne "0" ]; do printf "."; dneed=`expr ${dneed} - 1`; done
+else
+    printf "Configure Network: $nic"
+    dneed=`expr 25 - $nlenght`
+    echo "setup_interface $nic v4 ${Yiaddr}/${mask}" >>${ALTROOT}/etc/sysding.conf
+    /usr/sbin/svccfg -s network/physical:default setprop general/enabled=true
+    printf "."
+    if [ -z "$IPv6ip" ]; then
+	ipadm create-addr -T addrconf ${nic}/v6link
+	IPv6ip=`ipadm show-addr | grep "${nic}/v6link" | nawk '{gsub("%.*",""); print $4}'`
+    fi
+    echo "setup_interface $nic v6 ${IPv6ip}/10" >>${ALTROOT}/etc/sysding.conf
+    /usr/sbin/svccfg -s network/physical:nwam setprop general/enabled=false
+    printf "."
+    echo "setup_route default $Router" >>${ALTROOT}/etc/sysding.conf
+    printf "."
+    while [ "$dneed" -ne "0" ]; do printf "."; dneed=`expr ${dneed} - 1`; done
+fi
+(cd ${ALTROOT}/etc/svc/profile; ln -s generic_limited_net.xml generic.xml)
+echo " done"
+
+if [ $RLOGIN = yes ]; then
+    printf "Configure Legacy Network Services"
+    dneed=14
+    echo "/usr/sbin/svcadm enable network/shell:default" >>${ALTROOT}/etc/sysding.conf
+    echo "/usr/sbin/svcadm enable network/login:rlogin" >>${ALTROOT}/etc/sysding.conf
+    while [ "$dneed" -ne "0" ]; do printf "."; dneed=`expr ${dneed} - 1`; done
+    echo " done"
+fi
+
+if [ -n $NTPservs ]; then
+    printf "Configure Network Time Protocol"
+    dneed=15
+    sed -e "/^server/,+1d" ${ALTROOT}/etc/inet/ntp.client >${ALTROOT}/etc/inet/ntp.conf
+    printf "."
+    for serv in $NTPservs
+    do
+	echo "server $serv iburst" >>${ALTROOT}/etc/inet/ntp.conf
+    done
+    echo "/usr/sbin/svcadm enable network/ntp:default" >>${ALTROOT}/etc/sysding.conf
+    while [ "$dneed" -ne "0" ]; do printf "."; dneed=`expr ${dneed} - 1`; done
+    echo " done"
+fi
+
+if [ -n "$NIS" ]; then
+    printf "Configure Network Information Service (NIS) "
+    cp -p /etc/defaultdomain ${ALTROOT}/etc
+    if [ "$NIS" = full ]; then
+	(cd ${ALTROOT}/etc/svc/profile;
+	[ -h name_service.xml ] && rm name_service.xml;
+	ln -s ns_nis.xml name_service.xml)
+	printf "."
+	(cd ${ALTROOT}/etc; cp -p nsswitch.nis nsswitch.conf)
+    else
+	(cd ${ALTROOT}/etc/svc/profile; 
+	[ -h name_service.xml ] && rm name_service.xml;
+	ln -s ns_dns.xml name_service.xml)
+	printf "."
+	[ -f /tmp/nsswitch.conf ] && mv /tmp/nsswitch.conf ${ALTROOT}/etc
+    fi
+    printf "."
+    mkdir -p ${ALTROOT}/var/yp/binding/$NISdmain
+    cp -p /var/yp/binding/${NISdmain}/ypservers ${ALTROOT}/var/yp/binding/$NISdmain
+    printf "."
+    cat /tmp/hosts.add >> ${ALTROOT}/etc/inet/hosts
+    /usr/sbin/svccfg import /lib/svc/manifest/network/nis/client.xml
+    /usr/sbin/svccfg -s network/nis/client:default setprop general/enabled=true
+    /usr/sbin/svcadm refresh network/nis/client:default
+    echo " done"
+fi
+
+printf "Configure Dump Device.................."
+WD=`pwd`
+printf "."
+dumpmajor=`awk '/^dump / {print $2}' ${ALTROOT}/etc/name_to_major`
+printf "."
+cd ${ALTROOT}/devices/pseudo
+printf "."
+/usr/sbin/mknod dump@0:dump c $dumpmajor 0
+printf "."
+cd ../../dev
+printf "."
+ln -s ../devices/pseudo/dump@0:dump dump
+printf "."
+/usr/sbin/dumpadm -r ${ALTROOT} >/dev/null
+printf "."
+/usr/bin/sed \
+	-e "s@/crash.*@/crash/${Hostname}@g" \
+	-e "s@swap@/dev/zvol/dsk/${pool_name}/dump@g" ${ALTROOT}/etc/dumpadm.conf \
+	> /tmp/dumpadm.conf
+printf "."
+mv /tmp/dumpadm.conf ${ALTROOT}/etc
+echo " done"
+
+if [ "$nfs4dom" ]; then
+    printf "Configure NFSv4 Domain Name...................."
+    echo "setup_nfs4domain $nfs4dom" >>${ALTROOT}/etc/sysding.conf
+    echo " done"
+fi
+
+if [ -n "$DNSdmain" -a "$NIS" != "full" ]; then
+    printf "Configure DNS name-service..."
+    # add the search directive to resolv.conf.
+    echo "domain  $DNSdmain" >${ALTROOT}/etc/resolv.conf
+    printf "..."
+    echo "search $DNSdmain" >>${ALTROOT}/etc/resolv.conf
+    printf "..."
+    for srv in $DNSserv
+    do
+	echo "nameserver  $srv" >>${ALTROOT}/etc/resolv.conf
+    done
+    chown netadm:netadm ${ALTROOT}/etc/resolv.conf
+    printf "........."
+    if [ "$DNSonly" = true ]; then
+	(cd ${ALTROOT}/etc/svc/profile; ln -s ns_dns.xml name_service.xml)
+	cp -p ${ALTROOT}/etc/nsswitch.dns ${ALTROOT}/etc/nsswitch.conf
+    fi
+    printf "..."
+    echo " done"
+fi
+
+printf "Configure users/groups......"
+echo $RLINE >${ALTROOT}/etc/shadow
+printf "....."
+/usr/bin/sed "/^root/d" /mnt/misc/etc/shadow >>${ALTROOT}/etc/shadow
+printf "....."
+echo "${lname}:${UHASH}:${SETPW}::::::" >>${ALTROOT}/etc/shadow
+printf "."
+/usr/bin/chmod 0400 ${ALTROOT}/etc/shadow
+printf "....."
+/usr/bin/chgrp sys ${ALTROOT}/etc/shadow
+echo "${lname}:x:${uid}:${gid}:${rname}:${UHOME}/${lname}:${SH}" >>${ALTROOT}/etc/passwd
+printf "..."
+echo " done"
+
+printf "Add login: $lname to RBAC"
+echo "${lname}::::profiles=Primary Administrator;roles=root" >>${ALTROOT}/etc/user_attr
+dneed=`expr 28 - ${ulenght}`
+while [ "$dneed" -ne "0" ]; do printf "."; dneed=`expr ${dneed} - 1`; done
+echo " done"
+
+if [ "$DO_RBAC" = yes ]; then
+    printf "Converting root account to role................"
+    /usr/bin/sed "/^root/d" ${ALTROOT}/etc/user_attr >/tmp/user_attr.$$
+    printf "root::::min_label=admin_low;lock_after_retries=no;" >>/tmp/user_attr.$$
+    printf "auths=solaris.*,solaris.grant;audit_flags=lo\\" >>/tmp/user_attr.$$
+    echo ":no;profiles=All;clearance=admin_high;type=role" >>/tmp/user_attr.$$
+    mv /tmp/user_attr.$$ ${ALTROOT}/etc/user_attr
+    /usr/bin/chgrp sys ${ALTROOT}/etc/user_attr
+    print " done"
+fi
+
+printf "Add local HOME for user: ${lname}"
+/usr/bin/mkdir ${ALTROOT}/export/home/${lname}
+cp -p /etc/skel/.bashrc ${ALTROOT}/export/home/$lname
+(cd ${ALTROOT}/export/home; /usr/bin/chown -R ${lname}:${gid} $lname)
+/usr/sbin/zfs umount ${pool_name}/export/home
+/usr/sbin/zfs umount ${pool_name}/export
+dneed=`expr 22 - ${ulenght}`
+while [ "$dneed" -ne "0" ]; do printf "."; dneed=`expr ${dneed} - 1`; done
+echo " done"
+
+printf "Add group: users with GID ${gid}"
+echo "users::${gid}:" >>${ALTROOT}/etc/group
+echo "................. done"
+
+# packages we don't want on installed systems.
+DPKG="system/install/media/internal system/install/text-install system/install"
+
+# gather some unwanted packages/services on a platform basis.
+if [ "$KARCH" = sun4u ]; then
+  DPKG="$DPKG system/kernel/cpu/sun4v"
+fi
+if [ "$ARCH" = sparc ]; then
+    if [ "$PLATFORM" != "SUNW,Sun-Fire-880" ] || [ "$PLATFORM" != "SUNW,Sun-Fire-V890" ]; then
+	DPKG="$DPKG system/kernel/dynamic-reconfiguration/sun-fire-880"
+    fi
+    if [ "$PLATFORM" != "SUNW,Sun-Fire-15000" ]; then
+	DPKG="$DPKG system/kernel/dynamic-reconfiguration/sun-fire-15000"
+    fi
+    if [ "$PLATFORM" != "SUNW,Sun-Fire-15000" ] || [ "$PLATFORM" != "SUNW,SPARC-Enterprise" ]; then
+	# Note: FMD still depends on:
+	# system/domain-service-processor-protocol/sparc-enterprise
+	# on systems on which it isn't needed - needs to be fixed in illumos-gate.
+	DPKG="$DPKG service/key-management/sun-fire-15000"
+	DPKG="$DPKG system/domain-configuration/sparc-enterprise"
+    fi
+    # configure IPsec/routing on SPARC M-Class servers for ppp communication.
+    if [ "$PLATFORM" = "SUNW,SPARC-Enterprise" ]; then
+	XSCF=`/usr/platform/${PLATFORM}/sbin/prtdscp | awk '/^SP/ {print $3}'`
+	DOMADDR=`/usr/platform/${PLATFORM}/sbin/prtdscp | awk '/^Domain/ {print $3}'`
+	if [ -n "$XSCF" ] && [ -n "$DOMADDR" ]; then
+	    echo "{laddr $DOMADDR raddr $XSCF} ipsec" >${ALTROOT}/etc/inet/ipsecinit.conf
+	    echo "    {encr_algs aes encr_auth_algs sha256 sa shared}" >>${ALTROOT}/etc/inet/ipsecinit.conf
+	fi
+	# this is to silence these console messages:
+	# in.routed[474]: route 10.1.1.1/32 --> 10.1.1.2 nexthop is not directly connected
+	if [ -z $ ]; then
+	    echo "$Router" >${ALTROOT}/etc/defaultrouter
+	    /usr/sbin/svccfg -s network/routing/route:default setprop restarter/state=disabled
+	fi
+    fi
+fi
+
+printf "Uninstalling unwanted packages................."
+/usr/bin/pkg -R ${ALTROOT} uninstall -q --no-backup-be $DPKG
+echo " done"
+
+if [ -n "$addsw" ]; then
+    printf "Checking userland-incorporation "
+    ULNOW=`pkg info consolidation/userland/userland-incorporation | \
+	/usr/bin/nawk '/FMRI:/ {
+	    sub("^.*-[0-9]*.0.0.",""); sub(":.*","");print $1}'`
+    (cd /var; mv pkg pkg.orig; ln -s /a/var/pkg pkg)
+    /usr/bin/pkg refresh -q --full &
+    pkg_pid=$!
+    dial $pkg_pid
+    ULREP=`pkg list -H -n --no-refresh consolidation/userland/userland-incorporation@latest 2>/dev/null | \
+	/usr/bin/nawk '{gsub("^.*[0-9,0-9,0-9,0-9].0.0.",""); print $1}'`
+    echo "\b\c"
+    if [ "$ULNOW" -lt "$ULREP" ]; then
+	print "....... update needed"
+	print "Updating consolidation/userland/userland-incorporation..."
+	print "\nUpdating installed base system:" >>$LOG
+	print "------------------------------" >>$LOG
+	/usr/bin/pkg -R ${ALTROOT} update | tee -a $LOG
+	echo "" >> $LOG
+    else
+	echo "................ done"
+    fi
+    printf "Creating package dependencies"
+    for i in $addsw
+    do
+	/usr/bin/pkg contents -rm $i | nawk '/^depend/ {
+	    gsub("^.*fmri=","");
+	    gsub("@.*","");
+	    gsub("pkg:/","");
+	    print $1
+	}' >>/tmp/pkgs1.depend
+	printf "."
+    done
+    echo "consolidation/l10n/l10n-incorporation" >>/tmp/pkgs1.depend
+    # this dirty hack is need because of realy bad designed package names.
+    ISIN=`grep -c "network/dns/bind" /tmp/pkgs1.depend`
+    [ "$ISIN" -ge "1" ] && echo "network/dns/bind" >>/tmp/pkgs.add
+    ISIN=`grep -c "gnome/gnome-keyring" /tmp/pkgs1.depend`
+    [ "$ISIN" -ge "1" ] && echo "gnome/gnome-keyring" >>/tmp/pkgs.add
+    ISIN=`grep -c "network/ssh" /tmp/pkgs1.depend`
+    [ "$ISIN" -ge "1" ] && echo "network/ssh" >>/tmp/pkgs.add
+    ISIN=`grep -c "network/ftp" /tmp/pkgs1.depend`
+    [ "$ISIN" -ge "1" ] && echo "network/ftp" >>/tmp/pkgs.add
+    ISIN=`grep -c "network/telnet" /tmp/pkgs1.depend`
+    [ "$ISIN" -ge "1" ] && echo "network/telnet" >>/tmp/pkgs.add
+    printf "."
+    sed \
+	-e "/_install/d" \
+	-e "/gnome\/gnome-keyring/d" \
+	-e "/network\/dns\/bind/d" \
+	-e "/network\/ftp/d" \
+	-e "/network\/telnet/d" \
+	-e "/network\/ssh/d" /tmp/pkgs1.depend >/tmp/pkgs2.depend
+    printf "."
+    if [ -f /tmp/pkgs.add ]; then
+	for i in `cat /tmp/pkgs.add`
+	do
+	    echo "pkg:///${i}" >>/tmp/pkgs2.depend
+	    printf "."
+	done
+    fi
+    /usr/bin/sort -u /tmp/pkgs2.depend >/tmp/pkgs3.depend
+    printf "."
+    for i in `cat /tmp/pkgs3.depend`
+    do
+	printf "$i " >>/tmp/pkgs.depend
+    done
+    echo "" >>/tmp/pkgs.depend
+    echo "......... done"
+    print "Installing: ${UPD}..."
+    print "\nInstalling Software Collection: ${UPD}..." >>$LOG
+    /usr/bin/pkg -R ${ALTROOT} install --no-backup-be `cat /tmp/pkgs.depend` | tee -a $LOG
+    rm /tmp/pkgs.depend /tmp/pkgs1.depend /tmp/pkgs2.depend /tmp/pkgs3.depend /tmp/pkgs.add
+fi
+
+if [ "$dev" = "yes" ]; then
+    print "\nAdding OI-Software Maintainer Role for: $lname"
+    dneed=11
+    sed "/^${lname}/d" ${ALTROOT}/etc/user_attr >/tmp/user_attr.$$
+    awk '/^'"$lname"'/ {
+	print $0 ";type=normal;profiles=Software Installation"}' ${ALTROOT}/etc/user_attr \
+    >>/tmp/user_attr.$$
+    mv /tmp/user_attr.$$ ${ALTROOT}/etc/user_attr
+    chgrp sys ${ALTROOT}/etc/user_attr
+fi
+
+# set default boot device.
+if [ "$ARCH" = "sparc" ]; then
+    IBOOT="/usr/sbin/installboot"
+    printf "\nSetting OBP default boot-device"
+    # first find out if we have installed to a SCSI controller on a SUNW,Ultra-5_10.
+    case $PLATFORM in
+	SUNW,Ultra-5_10|SUNW,Sun-Blade-100)
+	IDE=`ls -al /dev/dsk/$instslice | grep -c sd`
+	if [ "$IDE" = 0 ]; then
+	    OBPDEV=`ls -al /dev/dsk/$instslice | \
+	    /usr/bin/nawk '{
+		sub("^.*../../devices","");
+		sub("dad","disk");
+		print $0}'`
+	else
+	    OBPDEV=`ls -al /dev/dsk/$instslice | \
+	    /usr/bin/nawk '{
+		sub("^.*../../devices","");
+		print $0}'`
+	fi
+	;;
+	*)
+	    OBPDEV=`ls -al /dev/dsk/$instslice | \
+	    /usr/bin/nawk '{
+		sub("^.*../../devices","");
+		sub("ssd","disk");
+		sub("sd","disk");
+		print $0}'`
+	;;
+    esac
+    if [ -n "$mirror" ]; then
+	case $PLATFORM in
+	    SUNW,Ultra-5_10|SUNW,Sun-Blade-100)
+	    if [ "$IDE" = 0 ]; then
+		MIRRDEV=`ls -al /dev/dsk/$mirrslice | \
+		/usr/bin/nawk '{
+		    sub("^.*../../devices","");
+		    sub("dad","disk");
+		    print $0}'`
+	    else
+		MIRRDEV=`ls -al /dev/dsk/$mirrslice | \
+		/usr/bin/nawk '{
+		    sub("^.*../../devices","");
+		    print $0}'`
+	    fi
+	    ;;
+	    *)
+		MIRRDEV=`ls -al /dev/dsk/$mirrslice | \
+		/usr/bin/nawk '{
+		    sub("^.*../../devices","");
+		    sub("ssd","disk");
+		    sub("sd","disk");
+		    print $0}'`
+	    ;;
+	esac
+	/usr/sbin/eeprom "boot-device=$OBPDEV $MIRRDEV"
+    else
+	/usr/sbin/eeprom "boot-device=$OBPDEV"
+    fi
+    dneed=16
+    while [ "$dneed" -ne "0" ]; do printf "."; dneed=`expr ${dneed} - 1`; done
+    echo " done"
+    BLK="/usr/platform/`uname -i`/lib/fs/zfs/bootblk"
+    if [ -n "$mirror" ]; then
+	printf "Install Bootblocks on: ${instslice}/${mirrslice}..."
+	ICMD="${IBOOT} -f -F zfs ${BLK} /dev/rdsk/${instslice}"
+	ICMD="${ICMD}; ${IBOOT} -f -F zfs ${BLK} /dev/rdsk/${mirrslice}"
+    else
+	printf "Installing Bootblock on: ${instslice}..."
+	ICMD="${IBOOT} -f -F zfs ${BLK} /dev/rdsk/${instslice}"
+    fi
+    $ICMD
+    echo " done"
+else
+    if [ "$needlin" = "yes" -o -z "$multiboot" ]; then
+	printf "\nInstalling Bootblock on: ${instslice}..."
+	/usr/sbin/bootadm install-bootloader -fM -P $pool_name
+	echo " done"
+    fi
+fi
+
+if [ "$needlin" = "yes" ]; then
+    # move the illumos boot-loaders aside, to be managed by grub.
+    printf "\nFinish Multiboot Boot Setup..."
+    [ ! -d /tmp/pcfs ] && mkdir /tmp/pcfs
+    mount -F pcfs /dev/dsk/${disk}s${efis} /tmp/pcfs
+    [ ! -d /tmp/pcfs/EFI/${distribution}/Boot ] && mkdir -p /tmp/pcfs/EFI/${distribution}/Boot
+    if [ -x /tmp/pcfs/EFI/Boot/bootx64.efi ]; then
+	# make sure we can overwrite bootfiles.
+	if [ -x /tmp/pcfs/EFI/${distribution}/Boot/bootx64.efi ]; then
+	    chmod 777 /tmp/pcfs/EFI/${distribution}/Boot/bootx64.efi
+	fi
+	mv /tmp/pcfs/EFI/Boot/bootx64.efi /tmp/pcfs/EFI/${distribution}/Boot
+    fi
+    if [ -x /tmp/pcfs/EFI/Boot/bootia32.efi ]; then
+	# make sure we can overwrite bootfiles.
+	if [ -x /tmp/pcfs/EFI/${distribution}/Boot/bootia32.efi ]; then
+	    chmod 777 /tmp/pcfs/EFI/${distribution}/Boot/bootia32.efi
+	fi
+	mv /tmp/pcfs/EFI/Boot/bootia32.efi /tmp/pcfs/EFI/${distribution}/Boot
+    fi
+    rm -rf /tmp/pcfs/EFI/Boot
+    echo " done"
+    printf "\nAdding $distribution Boot-Manager plugin for Linux..."
+    grub_cfg
+    print " done"
+    print "You have to run: /boot/efi/EFI/${distribution}/add_grub,"
+    print "after the Linux installation has been done, to activate"
+    print "$distribution in your grub configuration!\n"
+    umount /tmp/pcfs
+fi
+
+printf "Configuring devices..."
+${ALTROOT}/usr/sbin/devfsadm -r ${ALTROOT}
+touch ${ALTROOT}/reconfigure
+echo " done"
+
+/sbin/bootadm update-archive -R ${ALTROOT} -F cpio
+
+printf "Copying installation logs..."
+if [ ! -d ${ALTROOT}/var/sadm/system/logs ]; then
+    mkdir -p ${ALTROOT}/var/sadm/system/logs
+    cp $LOG ${ALTROOT}/var/sadm/system/logs
+    #mv $LOG ${ALTROOT}/var/sadm/system/logs
+fi
+echo " done"
+
+# umount all ZFS filesystems, to be able to set new mountpoint properties.
+printf "Umounting all ZFS filesystems..."
+/usr/bin/sleep 5
+/usr/sbin/zfs unmount -f -a
+echo " done"
+
+# set final mountpoints for all ZFS filesystems.
+printf "Set final mountpoint properties for all ZFS filesystems..."
+/usr/sbin/zfs set canmount=noauto "${pool_name}/ROOT/openindiana"
+/usr/sbin/zfs set mountpoint=/ "${pool_name}/ROOT/openindiana" 2>/dev/null
+/usr/sbin/zfs set canmount=noauto "${pool_name}/ROOT/openindiana/var"
+/usr/sbin/zfs set mountpoint=/var "${pool_name}/ROOT/openindiana/var" 2>/dev/null
+/usr/sbin/zfs set org.opensolaris.libbe:policy=static "${pool_name}/ROOT/openindiana/var"
+/usr/sbin/zfs inherit mountpoint "${pool_name}/ROOT/openindiana/var"
+/usr/sbin/zfs inherit org.opensolaris.libbe:policy "${pool_name}/ROOT/openindiana/var"
+/usr/sbin/zfs set mountpoint=/export "${pool_name}/export"
+/usr/sbin/zfs set mountpoint=/export/home "${pool_name}/export/home"
+echo " done"
+
+printf "\n\tInstallation done: "
+date
+print "\tRebooting now, please stand by...\n"
+/usr/sbin/reboot
diff --git a/usr/src/cmd/text-install/svc/text-mode-menu.ksh b/usr/src/cmd/text-install/svc/text-mode-menu.ksh
old mode 100644
new mode 100755
index 484b9186..fe616c9c
--- a/usr/src/cmd/text-install/svc/text-mode-menu.ksh
+++ b/usr/src/cmd/text-install/svc/text-mode-menu.ksh
@@ -21,16 +21,21 @@
 #
 #
 # Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved.
+# Copyright 2026 Klaus Ziegler
 #
 
 LANGUAGE_FILE=/etc/sysconfig/language
 
+# set PATH correctly to find dhcpinfo/ifconfig.
+PATH=/sbin:$PATH
+export PATH
+
 export TEXTDOMAIN="SUNW_INSTALL_TEXT_MENU"
 # LOGNAME variable is needed to display the shell prompt appropriately
 export LOGNAME=`/usr/bin/logname`
 
 # Block all signals which could terminate the menu or return to a parent process
-trap "" TSTP INT TERM ABRT QUIT
+trap "" TSTP TERM ABRT QUIT
 
 # Determine which shell program to use by grabbing this user's login-shell
 # from /etc/passwd
@@ -45,7 +50,7 @@ fi
 # Define the menu of commands and prompts
 menu_items=( \
     (menu_str=`gettext "Install OpenIndiana"`			 \
-	cmds=("/usr/bin/text-install")					 \
+	cmds=("/sbin/text-install")					 \
 	do_subprocess="true"						 \
 	msg_str="")							 \
     (menu_str=`gettext "Install Additional Drivers"`			 \
diff --git a/usr/src/cmd/text-install/svc/text-mode-menu.xml b/usr/src/cmd/text-install/svc/text-mode-menu.xml
index edba6b81..39726e8d 100644
--- a/usr/src/cmd/text-install/svc/text-mode-menu.xml
+++ b/usr/src/cmd/text-install/svc/text-mode-menu.xml
@@ -59,7 +59,7 @@
 	<exec_method
 		type='method'
 		name='start'
-		exec='/usr/sbin/text-mode-menu &gt; /dev/console &lt; /dev/console 2&gt;&amp;1'
+		exec='/sbin/text-mode-menu &gt; /dev/console &lt; /dev/console 2&gt;&amp;1'
 		timeout_seconds='0' />
 
 	<exec_method
diff --git a/usr/src/pkg/manifests/install-distribution-constructor.p5m b/usr/src/pkg/manifests/install-distribution-constructor.p5m
index b94e10a8..b7be1af7 100644
--- a/usr/src/pkg/manifests/install-distribution-constructor.p5m
+++ b/usr/src/pkg/manifests/install-distribution-constructor.p5m
@@ -68,6 +68,7 @@ dir  path=usr/share/distro_const
 file path=usr/share/distro_const/DC-manifest.defval.xml group=sys mode=0444
 file path=usr/share/distro_const/DC-manifest.rng group=sys mode=0444
 file path=usr/share/distro_const/boot_archive_archive.py mode=0555
+file path=usr/share/distro_const/boot_archive_compress_usr mode=0555
 file path=usr/share/distro_const/boot_archive_configure mode=0555
 file path=usr/share/distro_const/boot_archive_initialize.py mode=0555
 file path=usr/share/distro_const/create_iso mode=0555
diff --git a/usr/src/pkg/manifests/system-install-media-internal.p5m b/usr/src/pkg/manifests/system-install-media-internal.p5m
index a7eb23f8..512c7307 100644
--- a/usr/src/pkg/manifests/system-install-media-internal.p5m
+++ b/usr/src/pkg/manifests/system-install-media-internal.p5m
@@ -56,6 +56,7 @@ file path=jack/Desktop/install_openindiana.desktop owner=jack group=staff \
     mode=0755
 file path=jack/Desktop/text_install_openindiana.desktop owner=jack group=staff \
     mode=0755
+file path=jack/README.multiboot owner=jack group=staff mode=0644
 file path=jack/xorg.conf.vesa owner=jack group=staff
 dir  path=lib
 dir  path=lib/svc
diff --git a/usr/src/pkg/manifests/system-install-text-install.p5m b/usr/src/pkg/manifests/system-install-text-install.p5m
index 6ded7774..0950bdc8 100644
--- a/usr/src/pkg/manifests/system-install-text-install.p5m
+++ b/usr/src/pkg/manifests/system-install-text-install.p5m
@@ -41,7 +41,7 @@ dir  path=opt/install-test/bin
 file path=opt/install-test/bin/ict_test mode=0555
 dir  path=usr group=sys
 dir  path=usr/bin
-file path=usr/bin/text-install group=sys mode=0555
+file path=sbin/text-install group=sys mode=0555
 dir  path=usr/lib
 dir  path=usr/lib/python$(PYVER)
 dir  path=usr/lib/python$(PYVER)/vendor-packages
@@ -138,7 +138,6 @@ file \
     path=usr/lib/python$(PYVER)/vendor-packages/osol_install/text_install/multi_list_item.py \
     mode=0444
 file \
-    path=usr/lib/python$(PYVER)/vendor-packages/osol_install/text_install/network_nic_configure.py \
     mode=0444
 file \
     path=usr/lib/python$(PYVER)/vendor-packages/osol_install/text_install/network_nic_select.py \